Please select and order
€134.80
excl. VAT
CONFIGURE NOW
Norm
ÖNORM M 7437
Issue date: 2000 01 01
Gas shut-off devices for domestic use (excluding ball and taper plug valves up to DN 50 and up to PN 5 with a stop system integrated in the operating handle according to ÖNORM EN 331)
NONE
Read more
Withdrawn
: 2023 10 01
Publisher:
Austrian Standards International
Format:
Digital | 26 Pages
Language:
German
Optionally co-design standards:
NONE
Norm
DIN 267-13
Issue date :
2007 05
Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C
Norm
ISO 228-1:2000
Issue date :
2000 09 21
Pipe threads where pressure-tight joints are not made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ÖNORM EN 10028-2
Issue date :
2008 02 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10028-2
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
ÖNORM EN 10028-3
Issue date :
2003 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 10028-3
Issue date :
2009 02 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 10208-2
Issue date :
1997 04 01
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B (includes also Corrigendum AC:1996)
Norm
ÖNORM EN 10208-2
Issue date :
2008 10 01
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
Norm
ÖNORM EN 10222-1
Issue date :
2003 09 01
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings (EN 10222-1:1998 + A1:2002)
Norm
ÖNORM EN 10222-5
Issue date :
2000 03 01
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
Norm
ÖNORM EN 1563
Issue date :
2007 12 01
Founding - Spheroidal graphite cast irons (consolidated version)
Norm
ÖNORM EN 20898-2
Issue date :
1994 05 01
Mechanical properties of fasteners - Part 2 : Nuts with specified proof load values - Coarse thread (ISO 898-2:1992)
Norm
ÖNORM EN 377
Issue date :
1996 10 01
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
Norm
ÖNORM EN 549
Issue date :
1995 02 01
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN ISO 3506-1
Issue date :
1998 05 01
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:1997)
Norm
ÖNORM EN ISO 3506-1
Issue date :
2008 06 01
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screws and studs (ISO/DIS 3506-1:2008)
Norm
ÖNORM EN ISO 3506-2
Issue date :
1998 05 01
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO 3506-2:1997)
Norm
ÖNORM EN ISO 3506-2
Issue date :
2008 06 01
Mechanical properties of corrosion-resistant stainless-steel fasteners - Part 2: Nuts (ISO/DIS 3506-2:2008)
Norm
ÖNORM EN ISO 898-1
Issue date :
1999 12 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO 898-1:1999)
Norm
ÖNORM EN ISO 898-1
Issue date :
2007 02 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs (ISO/DIS 898-1:2006)
Norm
ÖNORM M 1613
Issue date :
1997 03 01
Widths across flats - Dimensions and tolerances - Metric series
Norm
ÖNORM M 3121
Issue date :
1991 01 01
Steel plates for boilers and pressure vessels; quality specifications
Norm
ÖNORM M 3404
Issue date :
1981 03 01
Wrought copper alloys; copper-zinc-alloys (brass, special brass); chemical composition
Norm
ÖNORM M 3406
Issue date :
1985 11 01
Wrougth copper alloys; copper-tin-alloys, (tin-bronce); chemical composition
Norm
ÖNORM M 7435-1
Issue date :
2002 05 01
Gaskets for gas supply - Part 1: Elastomeric gaskets for gas valves for domestic installations
Norm
ÖNORM M 7435-5
Issue date :
2002 05 01
Gaskets for gas supplies - Part 5: Gaskets made of rubber, cork and synthetic fibres for gas valves and gas appliances
Norm
ÖNORM M 7435-6
Issue date :
2002 05 01
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetraflouroethylene (PTFE) for gas valves, gas appliances and gas supply
Norm
ÖNORM DIN 1626
Issue date :
1989 05 01
Welded circular tubes of non-alloy steels with special quality requirements; technical delivery conditions
Norm
ÖNORM DIN 1628
Issue date :
1989 05 01
Welded circular tubes of non-alloy steels with very high quality requirements; technical delivery conditions
Norm
ÖNORM DIN 1629-3
Issue date :
1971 03 01
Seamless tubes of unalloyed steels for piping, equipment and containers; tubes for specified quality; technical terms of delivery
Norm
ÖNORM DIN 1629-4
Issue date :
1971 03 01
Seamless tubes of unalloyed steels for piping equipment and containers; tubes for specified quality; technical terms of delivery
Norm
ÖNORM DIN 2353
Issue date :
1992 05 01
Flareless compression couplings with compression ring - Complete couplings and survey
Norm
ÖNORM DIN 3389
Issue date :
1988 12 01
Isolating joints ready for installation into service pipes in gas and water supply; built-in-isolating joints; requirements and tests
Norm
ÖNORM EN 377
Issue date :
1996 10 01
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
Norm
ÖNORM EN 549
Issue date :
2023 08 15
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN 10025
Issue date :
1994 03 01
Hot rolled products of non-alloy structural steels - Technical delivery conditions (includes amendment A1:1993)
Norm
ÖNORM EN 10028-2
Issue date :
2017 09 15
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
ÖNORM EN 10028-3
Issue date :
2017 09 15
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 10208-2
Issue date :
2010 06 01
Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B
Norm
ÖNORM EN 10213-2
Issue date :
1996 04 01
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
Norm
ÖNORM EN 10213-4
Issue date :
1996 04 01
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic-ferritic steel grades
Norm
ÖNORM EN 10222-1
Issue date :
2017 07 01
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
Norm
ÖNORM EN 10222-5
Issue date :
2017 07 01
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
Norm
ÖNORM EN 20898-2
Issue date :
1994 05 01
Mechanical properties of fasteners - Part 2 : Nuts with specified proof load values - Coarse thread (ISO 898-2:1992)
Norm
ÖNORM EN ISO 898-1
Issue date :
2013 04 15
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
Norm
ÖNORM EN ISO 3506-1
Issue date :
2020 07 15
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs with specified grades and property classes (ISO 3506-1:2020)
Norm
ÖNORM EN ISO 3506-2
Issue date :
2020 07 15
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
Norm
ÖNORM M 1613
Issue date :
1997 03 01
Widths across flats - Dimensions and tolerances - Metric series
Norm
ÖNORM M 3121
Issue date :
1991 01 01
Steel plates for boilers and pressure vessels; quality specifications
Norm
ÖNORM M 3404
Issue date :
1981 03 01
Wrought copper alloys; copper-zinc-alloys (brass, special brass); chemical composition
Norm
ÖNORM M 3406
Issue date :
1985 11 01
Wrougth copper alloys; copper-tin-alloys, (tin-bronce); chemical composition
Norm
ÖNORM M 7435-1
Issue date :
2002 05 01
Gaskets for gas supply - Part 1: Elastomeric gaskets for gas valves for domestic installations
Norm
ÖNORM M 7435-5
Issue date :
2002 05 01
Gaskets for gas supplies - Part 5: Gaskets made of rubber, cork and synthetic fibres for gas valves and gas appliances
Norm
ÖNORM M 7435-6
Issue date :
2002 05 01
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetraflouroethylene (PTFE) for gas valves, gas appliances and gas supply
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
DIN 267-13
Issue date :
2007 05
Fasteners - Technical specifications - Part 13: Parts for bolted connections with specific mechanical properties for use at temperatures ranging from -200 °C to +700 °C