Please select and order
€185.23
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 15011
Issue date: 2014 06 15
Cranes - Bridge and gantry cranes
This European Standard applies to bridge and gantry cranes able to travel by wheels on rails, runways or roadway surfaces, and to gantry cranes without wheels mounted in ...
Read more
Withdrawn
: 2021 09 15
Publisher:
Austrian Standards International
Format:
Digital | 95 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard applies to bridge and gantry cranes able to travel by wheels on rails, runways or roadway surfaces, and to gantry cranes without wheels mounted in a stationary position.
This European Standard specifies requirements for all significant hazards, hazardous situations and events relevant to bridge and gantry cranes when used as intended and under conditions foreseen by the manufacturer.
This European Standard does not include requirements for the lifting of persons.
The specific hazards due to potentially explosive atmospheres, ionising radiation and operation in electromagnetic fields beyond the range of EN 61000-6-2 are not covered by this European Standard.
This European Standard is applicable to bridge and gantry cranes manufactured after the date of its publication as an EN.
Norm
ISO 2631-1:1997
Issue date :
1997 05 01
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements (Corrected version 1997-06)
Norm
ISO 6336-1:2006
Issue date :
2006 09 04
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors (Corrected version 2007-03)
Norm
ISO 7752-5:1985
Issue date :
1985 12 19
Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and portal bridge cranes
Norm
ISO 12488-1:2012
Issue date :
2012 06 26
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
Norm
ÖNORM EN 349
Issue date :
2008 09 01
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
Norm
ÖNORM EN ISO 11203
Issue date :
2010 01 01
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203:1995)
Norm
ÖNORM EN ISO 4871
Issue date :
2010 01 01
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996)
Norm
ÖNORM EN 894-1
Issue date :
2010 01 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
Norm
ÖNORM EN 894-2
Issue date :
2009 02 01
Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
Norm
ÖNORM EN 953
Issue date :
2009 06 01
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
Norm
ÖNORM EN ISO 11688-1
Issue date :
2010 01 01
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
Norm
ÖNORM EN 12077-2
Issue date :
2008 10 01
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
Norm
ÖNORM EN 12644-2
Issue date :
2009 04 15
Cranes - Information for use and testing - Part 2: Marking
Norm
ÖNORM EN 12644-1
Issue date :
2009 04 15
Cranes - Information for use and testing - Part 1: Instructions
Norm
ÖNORM EN 1993-6
Issue date :
2010 08 15
Eurocode 3 - Design of steel structures - Part 6: Crane supporting structures (consolidated version)
Norm
ÖNORM EN ISO 13857
Issue date :
2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
ÖNORM EN ISO 13849-1
Issue date :
2009 09 01
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006 + Cor 1:2009) (consolidated version)
Norm
ÖNORM EN ISO 13732-1
Issue date :
2009 02 01
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
Norm
ÖNORM EN 81-43
Issue date :
2010 02 15
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
Norm
ÖNORM EN ISO 3744
Issue date :
2011 03 01
Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010)
Norm
ÖNORM EN ISO 11201
Issue date :
2010 08 15
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010)
Norm
ÖNORM EN ISO 11204
Issue date :
2010 08 15
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)
Norm
ÖNORM EN ISO 11202
Issue date :
2010 08 15
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)
Norm
ÖNORM EN ISO 12100
Issue date :
2013 10 15
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
Norm
ISO 2631-1:1997
Issue date :
1997 05 01
Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements (Corrected version 1997-06)
Norm
ISO 6336-1:2019
Issue date :
2019 11 27
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
Norm
ISO 7752-5:2021
Issue date :
2021 06 17
Cranes — Control layout and characteristics — Part 5: Bridge and gantry cranes
Norm
ISO 12488-1:2012
Issue date :
2012 06 26
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General