Please select and order
€160.20
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 13135
Issue date: 2013 05 15
Cranes - Safety - Design - Requirements for equipment
This European Standard specifies requirements for the design and selection of electrical, mechanical, hydraulic and pneumatic equipment used in all types of cranes and
...
Read more
Withdrawn
: 2018 10 01
Publisher:
Austrian Standards International
Format:
Digital | 70 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard specifies requirements for the design and selection of electrical, mechanical, hydraulic and pneumatic equipment used in all types of cranes and
their associated fixed load lifting attachments with the objectives of protecting personnel from hazards affecting their health and safety and of ensuring reliability of function.
The electrical equipment covered by this European Standard commences at the point of connection of the supply to the crane (the crane supply switch) including systems
for power supply and control feeders situated outside the crane, e.g. flexible cables, conductor wires or bars, electric motors and cableless controls.
The principles to be applied for cranes transporting hazardous loads are given in this standard. Particular requirements are given for cranes transporting hot molten metal.
ÖNORM EN 13135-1
2006 09 01
Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment (consolid...
Norm
ÖNORM EN 13135-2
2006 01 01
Cranes - Equipment - Part 2: Non-electrotechnical equipment (consolidated version)
Norm
ÖNORM EN 13135-1
2004 05 01
Cranes - Safety - Design - Requirements for equipment - Part 1: Electrotechnical equipment
Norm
Norm
ISO 4309:2010
Issue date :
2010 07 27
Cranes — Wire ropes — Care and maintenance, inspection and discard
Norm
ISO 4347:2004
Issue date :
2004 02 11
Leaf chains, clevises and sheaves — Dimensions, measuring forces and tensile strengths
Draft
ISO/DIS 4347
Issue date :
2014 06 24
Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths
Norm
ISO 6336-1:2006
Issue date :
2006 09 04
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors (Corrected version 2007-03)
Norm
ISO 6336-2:2006
Issue date :
2006 09 04
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) (Corrected version 2007-03)
Norm
ISO 6336-3:2006
Issue date :
2006 09 04
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength (Corrected version 2007-03)
Norm
ISO 6336-5:2003
Issue date :
2003 06 27
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
Norm
ISO 10300-1:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
Norm
ISO 10300-2:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)
Norm
ISO 10300-3:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
Norm
ISO 12488-1:2012
Issue date :
2012 06 26
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
Technische Regel
ISO/TR 14521:2010
Issue date :
2010 11 11
Gears — Calculation of load capacity of wormgears
Norm
ÖNORM EN 818-1
Issue date :
2008 11 01
Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance
Norm
ÖNORM EN 12077-2
Issue date :
2008 10 01
Cranes safety - Requirements for health and safety - Part 2: Limiting and indicating devices
Norm
ÖNORM EN 12644-2
Issue date :
2009 04 15
Cranes - Information for use and testing - Part 2: Marking
Norm
ÖNORM EN 13411-6
Issue date :
2009 03 01
Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket
Norm
ÖNORM EN ISO 13850
Issue date :
2008 10 01
Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006)
Norm
ÖNORM EN ISO 13849-1
Issue date :
2009 09 01
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2006 + Cor 1:2009) (consolidated version)
Norm
ÖNORM EN ISO 13732-1
Issue date :
2009 02 01
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
Norm
ÖNORM EN ISO 12100
Issue date :
2013 10 15
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
Norm
ÖNORM EN ISO 4414
Issue date :
2011 04 01
Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)
Norm
ÖNORM EN ISO 4413
Issue date :
2011 04 15
Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)
Norm
ÖNORM EN 13411-4
Issue date :
2011 07 01
Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing
Norm
ÖNORM EN 13480-3
Issue date :
2014 10 01
Metallic industrial piping - Part 3: Design and calculation
Norm
ISO 4309:2017
Issue date :
2017 11 30
Cranes — Wire ropes — Care and maintenance, inspection and discard
Norm
ISO 4347:2015
Issue date :
2015 09 01
Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths
Norm
ISO 6336-1:2019
Issue date :
2019 11 27
Calculation of load capacity of spur and helical gears — Part 1: Basic principles, introduction and general influence factors
Norm
ISO 6336-2:2019
Issue date :
2019 11 26
Calculation of load capacity of spur and helical gears — Part 2: Calculation of surface durability (pitting) (Corrected version 2020-11)
Norm
ISO 6336-3:2019
Issue date :
2019 11 26
Calculation of load capacity of spur and helical gears — Part 3: Calculation of tooth bending strength (Corrected version 2020-11)
Norm
ISO 6336-5:2016
Issue date :
2016 08 04
Calculation of load capacity of spur and helical gears — Part 5: Strength and quality of materials
Norm
ISO 10300-1:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
Norm
ISO 10300-2:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 2: Calculation of surface durability (pitting)
Norm
ISO 10300-3:2014
Issue date :
2014 03 17
Calculation of load capacity of bevel gears — Part 3: Calculation of tooth root strength
Norm
ISO 12488-1:2012
Issue date :
2012 06 26
Cranes — Tolerances for wheels and travel and traversing tracks — Part 1: General
Technische Regel
ISO/TR 14521:2010
Issue date :
2010 11 11
Gears — Calculation of load capacity of wormgears