Please select and order

€109.76

excl. VAT

CONFIGURE NOW

Preview images

Preview images

Technische Regel

ONR 25161

Issue date: 2011 10 01

Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

This ONR lays down terms, nominal diameters, dimensions, requirements, tests and the quality control for pipes, joints and fittings of fibre-reinforced thermoset material...

Withdrawn : 2016 08 15

Publisher:

Austrian Standards International

Format:

Digital | 33 Pages

Language:

German

Currently valid:

ÖNORM B 5165:2022 04 15

Optionally co-design standards:

Committee 192: Components made of reinforced plastics

ICS

23.040.20 23.040.45 23.040.60 27.140

Topics

Mechanical & plant engineering, Energy and heat transfer engineering, Hydraulic energy engineering Construction products, Plastics pipes, Plastics fittings Construction products, Plastics pipes, Plastics pipes Machine components & tools, Pipes. Pipe components. Pipelines, Flanges, couplings and joints

This ONR lays down terms, nominal diameters, dimensions, requirements, tests and the quality control for pipes, joints and fittings of fibre-reinforced thermoset materials (GRP) which are intended for use in pipieline systems for hydro power plants. Moreover, prerequisites for the design, installation and pressure testing of the pipeline systems are subject of this ONR: This ONR does also serve as a basis for the procedure for the proof of conformity of relevant products. This standards contains also references to standards for test methods, which have to be applied supplementary to the provisions of this standard.

ÖNORM B 5165

2022 04 15

Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermoset...

Norm

ÖNORM B 5165

2016 08 15

Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermoset...

Norm

ONR 25161

2011 10 01

Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermoset...

Technische Regel

↖

Norm

ÖNORM B 2503

Issue date : 2009 03 15

Drain and sewer systems - Supplementary specifications for design, construction and testing

Norm

ÖNORM B 2538

Issue date : 2002 11 01

Long-distance, district and supply pipelines of water supply systems - Additional specifications concerning ÖNORM EN 805

Norm

ÖNORM B 5014-1

Issue date : 2007 08 01

Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials (consolidated version)

Norm

ÖNORM B 5018-1

Issue date : 2002 08 01

Testing of biofilm formation potential of pipes in contact with drinking water - Part 1: Test procedure

Vornorm

ÖNORM B 5018-2

Issue date : 2002 08 01

Testing of biofilm formation potential of pipes in contact with drinking water - Part 2: Evaluation

Norm

ÖNORM B 5161

Issue date : 2007 04 01

Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364 as well as procedure for the proof of conformity

Norm

ÖNORM EN 59

Issue date : 1978 05 01

Glass reinforced plastics; measurement of hardness by means of a barcol-impressor

Norm

ÖNORM EN 681-1

Issue date : 2007 07 01

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

Norm

ÖNORM EN 805

Issue date : 2000 08 01

Water supply - Requirements for systems and components outside buildings

Norm

ÖNORM EN 1119

Issue date : 2009 06 01

Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements

Norm

ÖNORM EN 1796

Issue date : 2011 08 01

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

Norm

ÖNORM EN 1796

Issue date : 2009 09 15

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) (consolidated version)

Norm

ÖNORM EN 13121-3

Issue date : 2010 07 01

GRP tanks and vessels for use above ground - Part 3: Design and workmanship

Norm

ÖNORM EN ISO 75-1

Issue date : 2004 09 01

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2004)

Norm

ÖNORM EN ISO 75-2

Issue date : 2006 09 01

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004) (consolidated version)

Norm

ÖNORM EN ISO 178

Issue date : 2011 03 15

Plastics - Determination of flexural properties (ISO 178:2010)

Norm

ÖNORM EN ISO 527-1

Issue date : 1996 05 01

Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1: 1994)

Norm

ÖNORM EN ISO 527-1

Issue date : 2010 06 01

Plastics - Determination of tensile properties - Part 1: General principles (ISO/DIS 527-1:2010)

Norm

ÖNORM EN ISO 527-2

Issue date : 1996 07 01

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)

Norm

ÖNORM EN ISO 527-2

Issue date : 2010 06 01

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO/DIS 527-2:2010)

Norm

ÖNORM EN ISO 1172

Issue date : 1999 01 01

Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)

Norm

ÖNORM EN ISO 2555

Issue date : 1999 12 01

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)

Norm

ÖNORM EN ISO 4287

Issue date : 2010 01 01

Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters (ISO 4287:1997 + Cor 1:1998 + Cor 2:2005 + Amd1:2009) (consolidated version)

Norm

ÖNORM EN ISO 9001

Issue date : 2009 08 15

Quality management systems - Requirements (ISO 9001:2008 + Cor.1:2009) (consolidated version)

Norm

ÖNORM Z 1020

Issue date : 2006 12 01

First aid boxes for working places and for building sites - Requirements, content, testing

Norm

ÖVE/ÖNORM EN ISO/IEC 17020

Issue date : 2004 11 01

General criteria for the operation of various types of bodies performing inspection (ISO/IEC 17020:1998)

Norm

ÖVE/ÖNORM EN ISO/IEC 17020

Issue date : 2011 03 01

Conformity assessment - General criteria for the operation of various types of bodies performing inspection (ISO/IEC/DIS 17020:2011)

Norm

ÖVE/ÖNORM EN ISO/IEC 17025

Issue date : 2007 01 01

General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005) (consolidated version)

Norm

ISO 2559:2000

Issue date : 2000 10 26

Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications

Final Draft

ISO/FDIS 2559

Issue date : 2011 09 15

Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications

Norm

ISO 3374:2000

Issue date : 2000 06 22

Reinforcement products — Mats and fabrics — Determination of mass per unit area

Norm

ISO 8533:2003

Issue date : 2003 11 21

Plastics piping systems for pressure and non-pressure drainage and sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Test methods to prove the design of cemented or wrapped joints

Norm

ISO 11359-1:1999

Issue date : 1999 09 30

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Norm

ISO 15306:2003

Issue date : 2003 11 28

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure

Norm

ISO 25780:2011

Issue date : 2011 05 13

Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with flexible joints intended to be installed using jacking techniques

Norm

ÖNORM B 2503

Issue date : 2017 11 01

Drain and sewer systems - Design, construction, testing, operation - Complementary provisions concering ÖNORM EN 476, ÖNORM EN 752 and ÖNORM EN 1610

Norm

ÖNORM B 2538

Issue date : 2018 02 01

Water supply - Requirements for systems and components outside buildings - Additional specifications concerning ÖNORM EN 805

Norm

ÖNORM B 5014-1

Issue date : 2016 08 15

Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials

Norm

ÖNORM B 5018-1

Issue date : 2002 08 01

Testing of biofilm formation potential of pipes in contact with drinking water - Part 1: Test procedure

Norm

ÖNORM B 5161

Issue date : 2022 01 15

Norm

ÖNORM EN 59

Issue date : 2016 05 15

Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester

Norm

ÖNORM EN 681-1

Issue date : 2007 07 01

Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber

Norm

ÖNORM EN 805

Issue date : 2000 08 01

Water supply - Requirements for systems and components outside buildings

Norm

ÖNORM EN 1119

Issue date : 2009 06 01

Norm

ÖNORM EN 1796

Issue date : 2013 04 15

Plastics piping systems for water supply with or without pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)

Norm

ÖNORM EN 13121-3

Issue date : 2016 08 15

GRP tanks and vessels for use above ground - Part 3: Design and workmanship

Norm

ÖNORM EN ISO 75-1

Issue date : 2020 05 15

Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)

Norm

ÖNORM EN ISO 75-2

Issue date : 2013 07 15

Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)

Norm

ÖNORM EN ISO 178

Issue date : 2019 08 01

Plastics - Determination of flexural properties (ISO 178:2019)

Norm

ÖNORM EN ISO 527-1

Issue date : 2019 12 01

Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)

Norm

ÖNORM EN ISO 527-2

Issue date : 2012 05 15

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)

Norm

ÖNORM EN ISO 1172

Issue date : 2023 11 15

Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)

Norm

ÖNORM EN ISO 2555

Issue date : 2018 10 15

Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)

Norm

ÖNORM EN ISO 4287

Issue date : 2012 02 01

Norm

ÖNORM EN ISO 9001

Issue date : 2015 11 15

Quality management systems - Requirements (ISO 9001:2015)

Norm

ÖNORM Z 1020

Issue date : 2006 12 01

First aid boxes for working places and for building sites - Requirements, content, testing

Norm

ÖVE/ÖNORM EN ISO/IEC 17020

Issue date : 2012 07 01

Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012)

Norm

ÖVE/ÖNORM EN ISO/IEC 17025

Issue date : 2018 02 15

General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)

Norm

ISO 8533:2019

Issue date : 2019 08 02

Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods to prove the design of cemented or wrapped joints

Norm

ISO 11359-1:2014

Issue date : 2014 01 06

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

Norm

ISO 15306:2003

Issue date : 2003 11 28

Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the resistance to cyclic internal pressure

Norm

ISO 25780:2011

Issue date : 2011 05 13

Technische Regel

DVS 2220

Issue date : 2011 05

Qualification testing of plastics laminators and adhesive bonders - Laminates as well as laminate and adhesivebonded joints between GFRPs (UP-GF and EP-GF)

Norm

ÖNORM B 5165

Issue date : 2016 08 15

Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)