Please select and order
€84.27
excl. VAT plus shipping costs
CONFIGURE NOW
Norm
ÖNORM M 7481
Issue date: 2005 01 01
Expansion joints with stainless steel bellows for gas piping - Safety requirements, type testing, marking
Diese ÖNORM gilt für Anforderungen und Prüfung von Balg-Kompensatoren mit Bälgen aus nichtrostendem Stahl bis DN 500 und PN 16, die mit Gasen nach ÖNORM EN 437 betrieben ...
Read more
Valid
Publisher:
Austrian Standards International
Format:
Digital | 14 Pages
Language:
German
Optionally co-design standards:
ICS
Diese ÖNORM gilt für Anforderungen und Prüfung von Balg-Kompensatoren mit Bälgen aus nichtrostendem Stahl bis DN 500 und PN 16, die mit Gasen nach ÖNORM EN 437 betrieben werden.
ÖNORM M 7481
2005 01 01
Expansion joints with stainless steel bellows for gas piping - Safety requirements, type testing, ma...
Norm
↖
ÖNORM M 7481
1999 09 01
Stainless steel expansion joints with bellows units - Safety requirements, testing, marking
Norm
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ÖNORM EN 10028-7
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10088-2
Issue date :
2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10088-3
Issue date :
2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10130
Issue date :
2007 03 01
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Norm
ÖNORM EN 10216-1
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (EN 10216-1:2002 + A1:2004)
Norm
ÖNORM EN 10216-2
Issue date :
2007 12 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10216-3
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
ÖNORM EN 10217-1
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties (consolidated version)
Norm
ÖNORM EN 10217-2
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10217-3
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10217-5
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 10220
Issue date :
2003 04 01
Seamless and welded steel tubes - Dimensions and masses per unit length
Norm
ÖNORM EN 10222-2
Issue date :
2000 04 01
Steel forgings for pressure purposes - Part 2: Ferritic and martesitic steels with specified elevated temperature properties
Norm
ÖNORM EN 10222-3
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
ÖNORM EN 10222-4
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
ÖNORM EN 10253-2
Issue date :
2008 09 01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Norm
ÖNORM EN 1092-1
Issue date :
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
ÖNORM EN 1092-2
Issue date :
1997 09 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
Norm
ÖNORM EN 1092-3
Issue date :
2004 01 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
Norm
ÖNORM EN 1333
Issue date :
2006 05 01
Flanges and their joints - Pipework components - Definition and selection of PN
Norm
ÖNORM ISO 272
Issue date :
1980 11 01
Fasterners; widths across flats for hexagon screws and nuts
Norm
ÖNORM M 7435-1
Issue date :
2002 05 01
Gaskets for gas supply - Part 1: Elastomeric gaskets for gas valves for domestic installations
Norm
ÖNORM M 7435-3
Issue date :
2002 05 01
Gaskets for gas supplies - Part 3: Gaskets made of elastomers for gas supply and pipelines
Norm
ÖNORM M 7435-6
Issue date :
2002 05 01
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetraflouroethylene (PTFE) for gas valves, gas appliances and gas supply
Norm
ÖNORM EN 1092-1
Issue date :
2018 10 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
ÖNORM EN 1092-2
Issue date :
1997 09 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
Norm
ÖNORM EN 1092-3
Issue date :
2004 01 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
Norm
ÖNORM EN 1333
Issue date :
2006 05 01
Flanges and their joints - Pipework components - Definition and selection of PN
Norm
ÖNORM EN 10028-7
Issue date :
2016 11 15
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10088-2
Issue date :
2014 12 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10088-3
Issue date :
2014 12 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10130
Issue date :
2007 03 01
Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions
Norm
ÖNORM EN 10216-1
Issue date :
2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10216-2
Issue date :
2020 03 15
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10216-3
Issue date :
2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Norm
ÖNORM EN 10217-1
Issue date :
2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
Norm
ÖNORM EN 10217-2
Issue date :
2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10217-3
Issue date :
2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
Norm
ÖNORM EN 10217-5
Issue date :
2019 07 15
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
Norm
ÖNORM EN 10220
Issue date :
2003 04 01
Seamless and welded steel tubes - Dimensions and masses per unit length
Norm
ÖNORM EN 10222-2
Issue date :
2023 04 15
Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
Norm
ÖNORM EN 10222-3
Issue date :
2017 07 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
ÖNORM EN 10222-4
Issue date :
2021 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
ÖNORM EN 10253-2
Issue date :
2021 12 01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Norm
ÖNORM EN 12760
Issue date :
2016 06 01
Industrial valves - Socket welding ends for steel valves
Norm
ÖNORM ISO 272
Issue date :
1980 11 01
Fasterners; widths across flats for hexagon screws and nuts
Norm
ÖNORM M 7435-1
Issue date :
2002 05 01
Gaskets for gas supply - Part 1: Elastomeric gaskets for gas valves for domestic installations
Norm
ÖNORM M 7435-3
Issue date :
2002 05 01
Gaskets for gas supplies - Part 3: Gaskets made of elastomers for gas supply and pipelines
Norm
ÖNORM M 7435-6
Issue date :
2002 05 01
Gaskets for gas supply - Part 6: Gasket materials based on synthetic fibres, graphite or polytetraflouroethylene (PTFE) for gas valves, gas appliances and gas supply
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation