Please select and order
€185.23
excl. VAT plus shipping costs
CONFIGURE NOW
Norm

ÖNORM EN ISO 80601-2-80

Issue date: 2020 02 15

Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency (ISO 80601-2-80:2018)

IEC 60601-1:2005+AMD1:2012, Clause 1, applies, except as follows: Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of VENTILATORY SUPPOR...
Read more
Valid
Publisher:
Austrian Standards International
Format:
Digital | 103 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
IEC 60601-1:2005+AMD1:2012, Clause 1, applies, except as follows: Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of VENTILATORY SUPPORT EQUIPMENT, as defined in 201.3.205, for VENTILATORY INSUFFICIENCY, as defined in 201.3.204, hereafter also referred to as ME EQUIPMENT, in combination with its ACCESSORIES: — intended for use in the HOME HEALTHCARE ENVIRONMENT; — intended for use by a LAY OPERATOR; — intended for use with PATIENTS who have VENTILATORY INSUFFICIENCY or failure, the most fragile of which would likely experience injury with the loss of this artificial ventilation; — intended for TRANSIT-OPERABLE use; — not intended for PATIENTS who are dependent on artificial ventilation for their immediate life support. This document is also applicable to those ACCESSORIES intended by their MANUFACTURER to be connected to the VENTILATOR BREATHING SYSTEM of VENTILATORY SUPPORT EQUIPMENT for VENTILATORY INSUFFICIENCY, where the characteristics of those ACCESSORIES can affect the BASIC SAFETY or ESSENTIAL PERFORMANCE of the VENTILATORY SUPPORT EQUIPMENT for VENTILATORY INSUFFICIENCY. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document except in IEC 60601-1:2005+AMD1:2012, 7.2.13 and 8.4.1. This document does not specify the requirements for: — VENTILATORS or ACCESSORIES for VENTILATOR-DEPENDENT PATIENTS intended for critical care applications, which are given in ISO 80601-2-12; — VENTILATORS or ACCESSORIES intended for anaesthetic applications, which are given in ISO 80601-2-13; — VENTILATORS or ACCESSORIES intended for the emergency medical services environment, which are given in ISO 80601-2-84, the future replacement for ISO 10651-3; — VENTILATORS or ACCESSORIES intended for VENTILATOR-DEPENDENT PATIENTS in the HOME HEALTHCARE ENVIRONMENT, which are given in ISO 80601-2-72; — VENTILATORY SUPPORT EQUIPMENT or ACCESSORIES intended for VENTILATORY IMPAIRMENT, which are given in ISO 80601-2-79; — sleep apnoea therapy ME EQUIPMENT, which are given in ISO 80601-2-70; — continuous positive airway pressure (CPAP) ME EQUIPMENT; — high-frequency jet VENTILATORS (HFJVs); — high-frequency oscillatory VENTILATORS (HFOVs); — oxygen therapy constant flow ME EQUIPMENT; — cuirass or “iron-lung” ventilation equipment. This document is a particular standard in the IEC 60601 and IEC/ISO 80601 series of documents.
ÖNORM EN ISO 80601-2-80
2020 02 15
Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 10651-6
2011 07 01
Lung ventilators for medical use - Particular requirements for basic safety and essential performanc...
Norm
ÖNORM EN ISO 10651-6
2009 09 01
Lung ventilators for medical use - Particular requirements for basic safety and essential performanc...
Norm
ÖNORM EN ISO 10651-6
2004 10 01
Lung ventilators for medical use - Particular requirements for basic safety and essential performanc...
Norm
Historie aufklappen
Norm
ISO 4135:2001
Issue date : 2001 08 02
Anaesthetic and respiratory equipment — Vocabulary
Norm
ISO 5356-1:2015
Issue date : 2015 03 13
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
Norm
ISO 15223-1:2016
Issue date : 2016 11 02
Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements (Corrected version 2017-03)
Norm
ISO 17664:2017
Issue date : 2017 10 25
Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices
Norm
ISO 23328-1:2003
Issue date : 2003 08 20
Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance
Norm
ISO 7396-1:2016
Issue date : 2016 02 15
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
Norm
ISO 4871:1996
Issue date : 1996 12 19
Acoustics — Declaration and verification of noise emission values of machinery and equipment
Norm
ISO 5367:2014
Issue date : 2014 10 15
Anaesthetic and respiratory equipment — Breathing sets and connectors
Norm
ISO 16142-1:2016
Issue date : 2016 03 09
Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
Norm
ISO 18562-1:2017
Issue date : 2017 03 13
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process
Norm
ISO 80369-1:2010
Issue date : 2010 12 08
Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements
Norm
ISO 17510:2015
Issue date : 2015 07 23
Medical devices — Sleep apnoea breathing therapy — Masks and application accessories
Norm
ISO 8836:2014
Issue date : 2014 10 15
Suction catheters for use in the respiratory tract
Norm
ISO 3744:2010
Issue date : 2010 09 22
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
Norm
ISO 9000:2015
Issue date : 2015 09 22
Quality management systems — Fundamentals and vocabulary
Norm
ISO 9360-1:2000
Issue date : 2000 03 16
Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml
Norm
ISO 9360-2:2001
Issue date : 2001 05 10
Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
Norm
ISO 23328-2:2002
Issue date : 2002 10 22
Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects
Norm
ISO 80369-7:2016
Issue date : 2016 10 14
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications (Corrected version 2016-12)
Norm
ISO 80601-2-12:2020
Issue date : 2020 02 25
Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
Norm
ISO 80601-2-72:2015
Issue date : 2015 09 01
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
Norm
ISO 80601-2-74:2017
Issue date : 2017 05 18
Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
Norm
ISO 7000:2014
Issue date : 2014 01 20
Graphical symbols for use on equipment — Registered symbols
Norm
ISO 80601-2-80:2018
Issue date : 2018 07 18
Medical electrical equipment — Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency