Please select and order
€219.54
excl. VAT
CONFIGURE NOW
Norm

ÖNORM EN ISO 80601-2-13

Issue date: 2020 05 15

Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011 + Amd 1:2015 + Amd 2:2018) (consolidated version)

IEC 60601-1:2005+A1:2012, Clause 1 applies, except as follows: Replacement: This International Standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of...
Read more
Withdrawn : 2022 12 15
Publisher:
Austrian Standards International
Format:
Digital | 126 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
IEC 60601-1:2005+A1:2012, Clause 1 applies, except as follows: Replacement: This International Standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of an ANAESTHETIC WORKSTATION for administering inhalational anaesthesia whilst continuously attended by a professional OPERATOR. This International Standard specifies particular requirements for a complete ANAESTHETIC WORKSTATION and the following ANAESTHETIC WORKSTATION components which, although considered as individual devices in their own right, may be utilized, in conjunction with other relevant ANAESTHETIC WORKSTATION components, to form an ANAESTHETIC WORKSTATION to a given specification: - ANAESTHETIC GAS DELIVERY SYSTEM; - ANAESTHETIC BREATHING SYSTEM; - ANAESTHETIC GAS SCAVENGING SYSTEM; - ANAESTHETIC VAPOUR DELIVERY SYSTEM; - ANAESTHETIC VENTILATOR; - MONITORING EQUIPMENT; - ALARM SYSTEM; - PROTECTION DEVICE. An ANAESTHETIC WORKSTATION supplied complete and its individual components are considered as ME EQUIPMENT or ME SYSTEMS with regard to the general standard. This International Standard is also applicable to those ACCESSORIES intended by their MANUFACTURER to be connected to an ANAESTHETIC WORKSTATION where the characteristics of those ACCESSORIES can affect the BASIC SAFETY and ESSENTIAL PERFORMANCE of the ANAESTHETIC WORKSTATION. If a clause or subclause is specifically intended to be applicable to ANAESTHETIC WORKSTATION components only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to an ANAESTHETIC WORKSTATION and its individual components, as relevant. HAZARDS inherent in the intended physiological function of an ANAESTHETIC WORKSTATION and its individual components within the scope of this International Standard are not covered by specific requirements in this International Standard except in 7.2.13 and 8.4.1 of the general standard. This International Standard is not applicable to any ANAESTHETIC WORKSTATION intended for use with flammable anaesthetic agents, as determined by Annex BB.
ÖNORM EN ISO 80601-2-13
2022 12 15
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 80601-2-13
2020 05 15
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 80601-2-13
2020 05 01
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 80601-2-13
2013 03 15
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 8835-3
2011 03 01
Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas ...
Norm
ÖNORM EN ISO 8835-4
2009 09 15
Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004)
Norm
ÖNORM EN ISO 8835-2
2009 09 01
Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007)
Norm
ÖNORM EN ISO 8835-5
2009 07 15
Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004)
Norm
ÖNORM EN ISO 8835-2
2007 11 01
Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007)
Norm
ÖVE/ÖNORM EN 60601-2-13
2007 07 01
Medical electrical equipment - Part 2-13: Particular requirements for the safety and essential perfo...
Norm
ÖNORM EN ISO 8835-5
2005 07 01
Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004)
Norm
ÖNORM EN ISO 8835-5
2005 05 01
Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004) (consolidated v...
Norm
ÖNORM EN ISO 8835-4
2005 05 01
Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004) (co...
Norm
ÖNORM EN 740
2004 06 01
Anaesthetic workstations and their modules - Particular requirements (EN 740:1998 + A1:2004)
Norm
ÖNORM EN 740
2004 06 01
Anaesthetic workstations and their modules - Particular requirements (EN 740:1998 + A1:2004)
Norm
ÖNORM EN 740/AC1
1999 07 01
Anaesthetic workstations and their modules - Particular requirements (Corrigendum)
Norm
ÖNORM EN 740/AC1
1999 07 01
Anaesthetic workstations and their modules - Particular requirements (Corrigendum)
Norm
ÖNORM EN 740
1998 10 01
Anaesthetic workstations and their modules - Particular requirements
Norm
ÖNORM EN 740
1998 10 01
Anaesthetic workstations and their modules - Particular requirements
Norm
Historie aufklappen
Norm
ISO 2878:2005
Issue date : 2005 06 29
Rubber — Antistatic and conductive products — Determination of electrical resistance
Norm
ISO 15223-1:2021
Issue date : 2021 07 06
Medical devices — Symbols to be used with information to be supplied by the manufacturer — Part 1: General requirements (Corrected version 2021-07)
Norm
ISO 407:2004
Issue date : 2004 11 08
Small medical gas cylinders — Pin-index yoke-type valve connections
Norm
ISO 594-2:1998
Issue date : 1998 09 03
Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment — Part 2: Lock fittings
Norm
ISO 4135:2001
Issue date : 2001 08 02
Anaesthetic and respiratory equipment — Vocabulary
Norm
ISO 5145:2004
Issue date : 2004 04 23
Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning
Norm
ISO 5356-1:2004
Issue date : 2004 05 12
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
Norm
ISO 5356-2:2006
Issue date : 2006 09 11
Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors
Norm
ISO 5359:2008
Issue date : 2008 05 28
Low-pressure hose assemblies for use with medical gases
Norm
ISO 5360:2006
Issue date : 2006 10 11
Anaesthetic vaporizers — Agent-specific filling systems
Norm
ISO 5362:2006
Issue date : 2006 05 22
Anaesthetic reservoir bags
Norm
ISO 5367:2000
Issue date : 2000 06 08
Breathing tubes intended for use with anaesthetic apparatus and ventilators
Norm
ISO 7396-1:2007
Issue date : 2007 03 28
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum (Corrected version 2007-03)
Norm
ISO 7396-2:2007
Issue date : 2007 04 16
Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems (Corrected version 2007-04)
Norm
ISO 8836
Issue date : 1988 12 01
Suction catheters for use in respiratory tract
Norm
ISO 9170-1:2008
Issue date : 2008 06 16
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
Norm
ISO 9170-2:2008
Issue date : 2008 06 16
Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems
Norm
ISO 10524-1:2006
Issue date : 2006 01 30
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices
Norm
ISO 80601-2-55:2018
Issue date : 2018 02 12
Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
Norm
ÖNORM EN ISO 80601-2-13
Issue date : 2022 12 15
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2022)