ÖNORM EN ISO 16090-1

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of stationary milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2), machining centres and transfer machines which are intended to cut cold metal, and other non-combustible cold materials except for wood or materials with physical characteristics similar to those of wood as defined in ISO 19085-1, and for glass, stone and engineered/agglomerated materials as defined in EN 14618. This document covers the following machines: a)manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1),e.g. knee and column type milling machines (see Figures C.1 and C.2); b)manually, with limited numerical control, operated boring and milling machines (see 3.2.2,Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4); c)numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automaticmilling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines(see Figures C.5, C.6 and C.7); d)transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequenceof machining operations and process parameters (see Figures C.8, C.9, C.10, C.11, C.12 and C.13).