Please select and order

€72.72

excl. VAT

CONFIGURE NOW

Norm

ÖNORM EN ISO 14923

Issue date: 2003 09 01

Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)

This European Standard gives guidance on tests used for characterizations of coatings produced by thermal spraying. It is not possible in this document to go into detail...

Valid

Publisher:

Austrian Standards International

Format:

Digital | 17 Pages

Language:

German | English | Download GER/ENG

Optionally co-design standards:

Committee 050: Paints and varnishes

ICS

25.220.20

Topics

Construction products, Surface treatment, Surface treatment Chemistry, paper & textiles, Surface treatment, Surface treatment Mechanical engineering foundations & materials, Surface treatment, Surface treatment

This European Standard gives guidance on tests used for characterizations of coatings produced by thermal spraying. It is not possible in this document to go into details regarding the different types of coatings and large numbers of coatings due to the fact that all meltable materials can be processed by thermal spraying and that so many and varied thermal spraying processes exist. The tests listed are procedures and test criteria in general use for thermally sprayed coatings. Test methods not mentioned here are only used in special cases or under laboratory conditions. NOTE Continuous further development and technical improvements mean that this standard cannot make any claim to completeness.

ÖNORM EN ISO 14923

2003 09 01

Thermal spraying - Characterization and testing of thermally sprayed coatings (ISO 14923:2003)

Norm

↖

Norm

ISO 13565-1:1996

Issue date : 1996 12 05

Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions

Norm

ISO 13565-2:1996

Issue date : 1996 12 05

Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 2: Height characterization using the linear material ratio curve

Norm

ISO 14577-1:2002

Issue date : 2002 10 10

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Norm

ISO 14577-2:2002

Issue date : 2002 10 10

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

Norm

ISO 14577-3:2002

Issue date : 2002 10 10

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

Norm

ISO 2063:2005

Issue date : 2005 03 10

Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys

Norm

ISO 3274:1996

Issue date : 1996 12 05

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments

Norm

ISO 4287:1997

Issue date : 1997 04 03

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters

Norm

ISO 4516:2002

Issue date : 2002 06 20

Metallic and other inorganic coatings — Vickers and Knoop microhardness tests

Norm

ISO 8301:1991

Issue date : 1991 08 08

Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus

Norm

ISO 8894-1:1987

Issue date : 1987 03 26

Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire method (cross-array)

Draft

ISO/DIS 8894-1

Issue date : 2008 06 11

Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)

Norm

ISO 9227:2006

Issue date : 2006 07 06

Corrosion tests in artificial atmospheres — Salt spray tests

Norm

ÖNORM EN 1274

Issue date : 2005 01 01

Thermal spraying - Powders - Composition, technical supply conditions

Norm

ÖNORM EN 571-1

Issue date : 1997 04 01

Non destructive testing - Penetrant testing - Part 1: General principles

Norm

ÖNORM EN 582

Issue date : 1994 01 01

Thermal spraying - Determination of tensile adhesive strength

Norm

ÖNORM EN 623-2

Issue date : 1994 01 01

Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity

Norm

ÖNORM EN 657

Issue date : 2005 06 01

Thermal spraying - Terminology, classification

Norm

ÖNORM EN 821-2

Issue date : 1997 09 01

Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method

Norm

ÖNORM EN 993-14

Issue date : 1998 07 01

Methods of testing dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot-wire (cross-array) method

Norm

ÖNORM EN 993-14

Issue date : 2008 03 01

Methods of testing insulating and dense shaped refractory products - Part 14: Determination of thermal conductivity by the hot wire (cross-array) and resistance thermometer methods

Norm

ÖNORM EN ISO 1463

Issue date : 2004 08 01

Metallic and oxide coatings - Measurement of coating thickness - Microscopical method (ISO 1463:2003)

Norm

ÖNORM EN ISO 14919

Issue date : 2001 10 01

Thermal spraying - Wires, rods and cords for flame and arc spraying - Classification - Technical supply conditions (ISO 14919:2001)

Norm

ÖNORM EN ISO 14922-1

Issue date : 1999 08 01

Thermal spraying - Quality requirements of thermally sprayed structures - Part 1: Guidance for selection and use (ISO 14922-1:1999)

Norm

ÖNORM EN ISO 14922-2

Issue date : 1999 08 01

Thermal spraying - Quality requirements of thermally sprayed structures - Part 2: Comprehensive quality requirements (ISO 14922-2:1999)

Norm

ÖNORM EN ISO 14922-3

Issue date : 1999 08 01

Thermal spraying - Quality requirements of thermally sprayed structures - Part 3: Standard quality requirements (ISO 14922-3:1999)

Norm

ÖNORM EN ISO 14922-4

Issue date : 1999 08 01

Thermal spraying - Quality requirements of thermally sprayed structures - Part 4: Elementary quality requirements (ISO 14922-4:1999)

Norm

ÖNORM EN ISO 2064

Issue date : 2000 06 01

Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)

Norm

ÖNORM EN ISO 2178

Issue date : 1995 04 01

Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:1982)

Norm

ÖNORM EN ISO 2360

Issue date : 2004 03 01

Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003)

Norm

ÖNORM EN ISO 3543

Issue date : 2006 08 01

Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003) (consolidated version)

Norm

ÖNORM EN ISO 3868

Issue date : 1995 02 01

Metallic and other non-organic coatings - Measurement of coating thickness - Fizeau multiple-beam interferometry method (ISO 3868:1976)

Norm

ÖNORM EN ISO 3882

Issue date : 2003 10 01

Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)

Norm

ÖNORM EN ISO 4518

Issue date : 1995 04 01

Metallic coatings - Measurement of coating thickness - Profilometric method (ISO 4518:1990)

Norm

ÖNORM EN ISO 4541

Issue date : 1995 02 01

Metallic and other non-organic coatings - Corrodkote corrosion test (CORR test) (ISO 4541:1978)

Norm

ÖNORM EN ISO 4624

Issue date : 2003 07 01

Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)

Norm

ÖNORM EN ISO 6507-1

Issue date : 2006 10 01

Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005)

Norm

ÖNORM EN ISO 6507-2

Issue date : 2006 10 01

Metallic materials - Vickers hardness test - Part 2: Verification and calibration of testing machines (ISO 6507-2:2005)

Norm

ÖNORM EN ISO 6507-3

Issue date : 2006 10 01

Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005)

Norm

ÖNORM EN ISO 6508-1

Issue date : 2006 10 01

Metallic materials - Rockwell hardness test - Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-1:2005)

Norm

ÖNORM EN ISO 6988

Issue date : 1995 02 01

Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985)

Norm

ÖNORM EN ISO 9220

Issue date : 1995 02 01

Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988)

Norm

ISO 2063:2005

Issue date : 2005 03 10

Thermal spraying — Metallic and other inorganic coatings — Zinc, aluminium and their alloys

Norm

ISO 3274:1996

Issue date : 1996 12 05

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments

Norm

ISO 4287:1997

Issue date : 1997 04 03

Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters

Norm

ISO 4516:2002

Issue date : 2002 06 20

Metallic and other inorganic coatings — Vickers and Knoop microhardness tests

Norm

ISO 8301:1991

Issue date : 1991 08 08

Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus

Norm

ISO 8894-1:2010

Issue date : 2010 04 29

Refractory materials — Determination of thermal conductivity — Part 1: Hot-wire methods (cross-array and resistance thermometer)

Norm

ISO 9227:2017

Issue date : 2017 03 17

Corrosion tests in artificial atmospheres — Salt spray tests

Norm

ISO 13565-1:1996

Issue date : 1996 12 05

Geometrical Product Specifications (GPS) — Surface texture: Profile method; Surfaces having stratified functional properties — Part 1: Filtering and general measurement conditions

Norm

ISO 13565-2:1996

Issue date : 1996 12 05

Norm

ISO 14577-1:2015

Issue date : 2015 07 08

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 1: Test method

Norm

ISO 14577-2:2015

Issue date : 2015 07 08

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 2: Verification and calibration of testing machines

Norm

ISO 14577-3:2015

Issue date : 2015 07 22

Metallic materials — Instrumented indentation test for hardness and materials parameters — Part 3: Calibration of reference blocks

Norm

ISO 14923:2003

Issue date : 2003 07 03

Thermal spraying — Characterization and testing of thermally sprayed coatings