Please select and order
€120.67
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 858-1
Issue date: 2002 07 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control
In dieser ÖNORM werden Abscheideranlagen für Leichtflüssigkeiten mit einer Dichte bis zu 0,95 g/cm3, (zB Erdöl, Dieselkraftstoffe, Heizöl, Benzin) behandelt. Sie ist vorn...
Read more
Withdrawn
: 2003 03 01
Publisher:
Austrian Standards International
Format:
Digital | 42 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
In dieser ÖNORM werden Abscheideranlagen für Leichtflüssigkeiten mit einer Dichte bis zu 0,95 g/cm3, (zB Erdöl, Dieselkraftstoffe, Heizöl, Benzin) behandelt. Sie ist vornehmlich für Anlagen gewerblicher Betriebe vorgesehen. Abscheideranlagen werden grundsätzlich nach Nenngrößen (gerundete Zahl, entspricht annähernd dem Zahlenwert des max. zulässigen Abwasserdurchflusses/l/ Sekunde) und Reinigungsklassen (orientiert an dem max. zulässigen Restölgehalt im Ablauf des gereinigten Abwassers) eingeteilt, wobei einem Restölgehalt von max. 0 mg/l und Reinigungsklasse II einem max. zulässigen Gehalt von 100 mg/l entspricht. Weiters wird auf die Baugrundsätze und die Leistungsanforderungen an Abscheideranlagen sowie auf Kennzeichnung, Prüfung und Güteüberwachung solcher Anlagen eingegangen. In vier normativen Anhängen werden generelle Anforderungen und Prüfverfahren - für Beschichtungen und Auskleidungen, - für Heizöl Extra-leicht, - für Analysen der Abwasserproben und - Brandverhalten der Abscheideranlagen behandelt. Ein informativer Anhang beinhaltet Musterschemata für die Güteüberwachung.
ÖNORM EN 858-1
2005 04 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
ÖNORM EN 858-1
2003 03 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
ÖNORM EN 858-1
2002 07 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, pe...
Norm
↖
Norm
ISO 1133:2005
Issue date :
2005 06 07
Plastics — Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
Norm
ISO 1817:2005
Issue date :
2005 10 25
Rubber, vulcanized — Determination of the effect of liquids (Corrected version 2006-02)
Norm
ISO 2812-1:2007
Issue date :
2007 01 10
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
Norm
ISO 2812-2:2007
Issue date :
2007 01 10
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
Norm
ISO 4628-2:2003
Issue date :
2003 09 10
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
Norm
ISO 4628-3:2003
Issue date :
2003 09 10
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
Norm
ISO 48:2007
Issue date :
2007 06 11
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 527-2:1993
Issue date :
1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 630:1995
Issue date :
1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
ISO 8217:2005
Issue date :
2005 11 18
Petroleum products — Fuels (class F) — Specifications of marine fuels
Norm
ÖNORM EN 10088-2
Issue date :
2005 09 01
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
Norm
ÖNORM EN 10088-3
Issue date :
2005 09 01
Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
Norm
ÖNORM EN 124
Issue date :
1995 01 01
Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control
Norm
ÖNORM EN 124
Issue date :
2007 09 01
Gully tops and manhole tops for vehicular and pedestrian areas
Norm
ÖNORM EN 228
Issue date :
2009 01 01
Automotive fuels - Unleaded petrol - Requirements and test methods
Norm
ÖNORM EN 476
Issue date :
1998 04 01
General requirements for components used in discharge pipes, drains and sewers for gravity systems
Norm
ÖNORM EN 476
Issue date :
2008 07 01
General requirements for components used in drains and sewers
Norm
ÖNORM EN 976-1
Issue date :
1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: ............(abbreviated)
Norm
ÖNORM EN 978
Issue date :
1998 04 01
Underground tanks of glass-reinforced plastics (GRP) - Determination of factor alpha and factor beta
Norm
ÖNORM EN ISO 1172
Issue date :
1999 01 01
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
Norm
ÖNORM EN ISO 1514
Issue date :
2005 02 01
Paints and varnishes - Standard panels for testing (ISO 1514:2004)
Norm
ÖNORM EN ISO 15607
Issue date :
2004 03 01
Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003)
Norm
ÖNORM EN ISO 15609-1
Issue date :
2005 01 01
Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 1: Arc welding (ISO 15609-1:2004)
Norm
ÖNORM EN ISO 15614-1
Issue date :
2005 02 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2004)
Norm
ISO 48:2010
Issue date :
2010 09 03
Rubber, vulcanized or thermoplastic — Determination of hardness (hardness between 10 IRHD and 100 IRHD)
Norm
ISO 527-2:2012
Issue date :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 630:1995
Issue date :
1995 11 09
Structural steels — Plates, wide flats, bars, sections and profiles
Norm
ISO 877:1994
Issue date :
1994 08 04
Plastics — Methods of exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
Norm
ISO 1817:2015
Issue date :
2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 1920:1976
Issue date :
1976 04 01
Concrete tests — Dimensions, tolerances and applicability of test specimens
Norm
ISO 2736-1:1986
Issue date :
1986 08 14
Concrete tests — Test specimens — Part 1: Sampling of fresh concrete
Norm
ISO 2812-1:2017
Issue date :
2017 11 10
Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water
Norm
ISO 2812-2:2018
Issue date :
2018 11 06
Paints and varnishes — Determination of resistance to liquids — Part 2: Water immersion method
Norm
ISO 4012:1978
Issue date :
1978 11 01
Concrete — Determination of compressive strength of test specimens
Norm
ISO 4628-2:2016
Issue date :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
Norm
ISO 4628-3:2016
Issue date :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
Norm
ISO 7253:1996
Issue date :
1996 12 12
Paints and varnishes — Determination of resistance to neutral salt spray (fog)
Norm
ISO 8217:2017
Issue date :
2017 03 17
Petroleum products — Fuels (class F) — Specifications of marine fuels
Norm
ÖNORM EN 858-1
Issue date :
2003 03 01
Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control