Please select and order

€143.05

excl. VAT plus shipping costs

CONFIGURE NOW

Norm

ÖNORM EN 806-2

Issue date: 2005 07 01

Specification for installations inside buildings conveying water for human consumption - Part 2: Design

This document gives recommendations, and specifies requirements, on the design of potable water installations within buildings and for pipework outside buildings but wit...

Valid

§ Legal References

Publisher:

Austrian Standards International

Format:

Digital | 56 Pages

Language:

German | English | Download GER/ENG

Optionally co-design standards:

Committee 122: Water supply

ICS

91.140.60

Topics

Building services engineering & equipment, Supply and disposal systems for buildings, Water supply systems Building services engineering & equipment, Water supply, Water supply systems

This document gives recommendations, and specifies requirements, on the design of potable water installations within buildings and for pipework outside buildings but within the premises (see EN 806-1) and applies to new installations, alterations and repairs.

ÖNORM EN 806-2

2005 07 01

Specification for installations inside buildings conveying water for human consumption - Part 2: Des...

Norm

↖

Norm

ÖNORM EN 10226-1

Issue date : 2004 09 01

Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation

Norm

ÖNORM EN 10240

Issue date : 1998 03 01

Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants

Norm

ÖNORM EN 10242

Issue date : 1995 02 01

Threaded pipe fitting in malleable cast iron

Norm

ÖNORM EN 10255

Issue date : 2007 08 01

Non-alloy steel tubes suitable for welding and threading - Technical delivery conditions

Norm

ÖNORM EN 10284

Issue date : 2000 07 01

Melleable cast iron fittings with compression ends for polyethylene (PE) piping systems

Norm

ÖNORM EN 1057

Issue date : 2006 09 01

Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications

Norm

ÖNORM EN 12201-1

Issue date : 2008 04 01

Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General

Norm

ÖNORM EN 12201-2

Issue date : 2003 08 01

Plastics piping systems for water supply - Polyethylene (PE) - Part 2: Pipes

Norm

ÖNORM EN 12201-3

Issue date : 2003 08 01

Plastics piping systems for water supply - Polyethylene (PE) - Part 3: Fittings

Norm

ÖNORM EN 12201-5

Issue date : 2003 08 01

Plastics piping systems for water supply - Polyethylene (PE) - Part 5: Fitness for purpose of the system

Norm

ÖNORM EN 12502-1

Issue date : 2005 05 01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 1: General

Norm

ÖNORM EN 12502-2

Issue date : 2005 05 01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 2: Influencing factors for copper and copper alloys

Norm

ÖNORM EN 12502-3

Issue date : 2005 05 01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 3: Influencing factors for hot dip galvanised ferrous materials

Norm

ÖNORM EN 12502-4

Issue date : 2005 05 01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 4: Influencing factors for stainless steels

Norm

ÖNORM EN 12502-5

Issue date : 2005 05 01

Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in water distribution and storage systems - Part 5: Influencing factors for cast iron, unalloyed and low alloyed steels

Norm

ÖNORM EN 1254-1

Issue date : 1998 04 01

Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes

Norm

ÖNORM EN 1254-1

Issue date : 2007 08 01

Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes

Norm

ÖNORM EN 1254-2

Issue date : 1998 04 01

Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes

Norm

ÖNORM EN 1254-2

Issue date : 2007 08 01

Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes

Norm

ÖNORM EN 1254-3

Issue date : 1998 04 01

Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes

Norm

ÖNORM EN 1254-4

Issue date : 1998 04 01

Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends

Norm

ÖNORM EN 1254-4/AC1

Issue date : 1999 10 01

Copper and copper alloys - Plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends (Corrigendum)

Norm

ÖNORM EN 1254-5

Issue date : 1998 04 01

Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes

Norm

ÖNORM EN 1254-5

Issue date : 2007 08 01

Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes

Norm

ÖNORM EN 1254-7

Issue date : 2004 07 01

Copper and copper alloys - Plumbing fittings - Part 7: Fittings with press ends for metallic tubes

Norm

ÖNORM EN 12842

Issue date : 2000 09 01

Ductile iron fittings for PVC-U or PE piping systems - Requirements and test methods

Norm

ÖNORM EN 13443-1

Issue date : 2008 03 01

Water conditioning equipment inside buildings - Mechanical filters - Part 1: Particle rating 80 µm to 150 µm - Requirements for performances, safety and testing

Norm

ÖNORM EN 14095

Issue date : 2004 03 01

Water conditioning equipment inside buildings - Electrolytic treatment systems with aluminium anodes - Requirements for performance, safety and testing

Norm

ÖNORM EN 1452-1

Issue date : 2000 02 01

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General

Norm

ÖNORM EN 1452-2

Issue date : 2000 02 01

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Pipes

Norm

ÖNORM EN 1452-3

Issue date : 2000 02 01

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings

Norm

ÖNORM EN 1452-5

Issue date : 2000 02 01

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 5: Fitness for purpose of the system

Norm

ÖNORM EN 14525

Issue date : 2005 02 01

Ductile iron wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, Steel, PVC-U, PE, Fibre-cement

Norm

ÖNORM EN 14743

Issue date : 2007 09 01

Water conditioning equipment inside buildings - Softeners - Requirements for performance, safety and testing

Norm

ÖNORM EN 1487

Issue date : 2000 07 01

Building valves - Hydraulic safety groups - Tests and requirements

Norm

ÖNORM EN 1488

Issue date : 2000 07 01

Building valves - Expansion groups - Tests and requirements

Norm

ÖNORM EN 1489

Issue date : 2000 07 01

Building valves - Pressure safety valves - Tests and requirements

Norm

ÖNORM EN 1490

Issue date : 2000 07 01

Building valves - Combined temperature and pressure relief valves - Tests and requirements

Norm

ÖNORM EN 1491

Issue date : 2000 07 01

Building valves - Expansion valves - Tests and requirements

Norm

ÖNORM EN 1717

Issue date : 2008 04 01

Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow

Norm

ÖNORM EN 545

Issue date : 2007 03 01

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Norm

ÖNORM EN 545

Issue date : 2008 10 01

Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods

Norm

ÖNORM EN 625

Issue date : 1996 02 01

Gas-fired central heating boilers - Specific requirements for the domestic hot water operation of combination boilers of nominal heat input not exceeding 70 kW

Norm

ÖNORM EN 805

Issue date : 2000 08 01

Water supply - Requirements for systems and components outside buildings

Norm

ÖNORM EN 806-1

Issue date : 2001 03 01

Specifications for installations inside buildings conveying water for human consumption - Part 1: General

Norm

ÖNORM EN 806-3

Issue date : 2006 08 01

Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method

Norm

ÖNORM EN 89

Issue date : 2007 06 01

Gas-fired storage water heaters for the production of domestic hot water (consolidated version)

Norm

ÖNORM EN 973

Issue date : 2003 11 01

Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers (EN 973:2002 + A1:2003)

Norm

ÖNORM EN 973

Issue date : 2009 03 01

Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers

Norm

ÖNORM EN ISO 15874-1

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15874-2

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15874-3

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)

Norm

ÖNORM EN ISO 15874-5

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)

Norm

ÖNORM EN ISO 15875-1

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15875-2

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15875-3

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)

Norm

ÖNORM EN ISO 15875-5

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)

Norm

ÖNORM EN ISO 15876-1

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15876-2

Issue date : 2008 03 01

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003 + Amd 1:2007) (consolidated version)

Norm

ÖNORM EN ISO 15876-3

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003)

Norm

ÖNORM EN ISO 15876-5

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)

Norm

ÖNORM EN ISO 15877-1

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2003)

Norm

ÖNORM EN ISO 15877-1

Issue date : 2006 08 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO/DIS 15877-1:2006)

Norm

ÖNORM EN ISO 15877-2

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO 15877-2:2003)

Norm

ÖNORM EN ISO 15877-2

Issue date : 2006 08 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Pipes (ISO/DIS 15877-2:2006)

Norm

ÖNORM EN ISO 15877-3

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO 15877-3:2003)

Norm

ÖNORM EN ISO 15877-3

Issue date : 2006 08 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings (ISO/DIS 15877-3:2006)

Norm

ÖNORM EN ISO 15877-5

Issue date : 2004 06 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO 15877-5:2003)

Norm

ÖNORM EN ISO 15877-5

Issue date : 2006 08 01

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 5: Fitness for purpose of the system (ISO/DIS 15877-5:2006)

Norm

ÖNORM EN ISO 3822-1

Issue date : 1999 07 01

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 1: Method of measurement (ISO 3822-1:1999)

Norm

ÖNORM EN ISO 3822-2

Issue date : 1995 10 01

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 2: Mounting and operating conditions for .......(abbreviated)

Norm

ÖNORM EN ISO 3822-3

Issue date : 1997 07 01

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 3: Mounting and operating conditions for .......(abbreviated)

Norm

ÖNORM EN ISO 3822-4

Issue date : 1997 07 01

Acoustics - Laboratory tests on noise emission from appliances and equipment used in water supply installations - Part 4: Mounting and operating conditions for special appliances

Norm

ÖNORM EN ISO 6509

Issue date : 1995 07 01

Corrosion of metals and alloys - Determination of dezincification resistance of brass (ISO 6509:1981)

Norm

ÖNORM EN ISO 9453

Issue date : 2007 01 01

Soft solder alloys - Chemical compositions and forms (ISO 9453:2006)