Please select and order
€109.76
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 331
Issue date: 2011 09 01
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings
This European standard specifies the general requirements for the construction, performance
and safety of ball valves and closed bottom taper plug valves. It also detail...
Read more
Withdrawn
: 2016 03 15
Publisher:
Austrian Standards International
Format:
Digital | 42 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European standard specifies the general requirements for the construction, performance
and safety of ball valves and closed bottom taper plug valves. It also details the test methods and
marking requirements.
It applies to metallic valves for domestic and commercial not directly buried installations inside or
outside of buildings, using gases of the first, second and third family (specified in EN 437) and working
up to 0,2 × 105 Pa, 0,5 × 105 Pa and 5 × 105 Pa.
Valve nominal sizes (DN) covered by this European standard are as follows:
6, 8, 10, 12, 15, 20, 25, 32, 40, 50.
ÖNORM EN 331
2016 03 15
Manually operated ball valves and closed bottom taper plug valves for gas installations for building...
Norm
ÖNORM EN 331
2011 09 01
Manually operated ball valves and closed bottom taper plug valves for gas installations for building...
Norm
↖
ÖNORM EN 331
1998 04 01
Manually operated ball valves and closed bottom taper plug valves for gas installations for building...
Norm
ÖNORM M 7437
1989 12 01
Gas shutting-off devices for domestic use; requirements, testing, marking of conformity
Norm
ÖNORM M 7437
1987 06 01
Gas shutting-off devices for domestic use; requirements, testing, marking of conformity
Norm
Norm
ISO 65:1981
Issue date :
1981 04 01
Carbon steel tubes suitable for screwing in accordance with ISO 7-1
Norm
ÖNORM EN 377
Issue date :
1996 10 01
Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes
Norm
ÖNORM EN 549
Issue date :
1995 02 01
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN ISO 6708
Issue date :
1995 10 01
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
Norm
ÖNORM EN 751-1
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 1: Anaerobic jointing compounds
Norm
ÖNORM EN 751-3
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes
Norm
ÖNORM EN 751-2
Issue date :
1997 03 01
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 2: Non-hardening jointing compounds
Norm
ÖNORM EN 1092-2
Issue date :
1997 09 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
Norm
ÖNORM EN 1254-1
Issue date :
1998 04 01
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
Norm
ÖNORM EN 1254-2
Issue date :
1998 04 01
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
Norm
ÖNORM EN 1775
Issue date :
2007 10 01
Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
Norm
ÖNORM EN 1593
Issue date :
2004 06 01
Non-destructive testing - Leak testing - Bubble emission techniques (EN 1593:1999 + A1:2003)
Norm
ÖNORM EN 1503-1
Issue date :
2001 02 01
Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards
Norm
ÖNORM EN 1503-3
Issue date :
2001 02 01
Valves - Materials for bodies, bonnets and covers - Part 3: Cast irons specified in European Standards
Norm
ÖNORM EN 1092-1
Issue date :
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
ÖNORM EN 682
Issue date :
2006 09 01
Elastomeric seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids (consolidated version)
Norm
ÖNORM EN 1503-4
Issue date :
2003 04 01
Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards
Norm
ÖNORM EN ISO 228-1
Issue date :
2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
ÖNORM EN 1092-3
Issue date :
2004 01 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges
Norm
ÖNORM EN ISO 9227
Issue date :
2006 10 01
Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2006)
Norm
ÖNORM EN 13501-1
Issue date :
2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 1555-3
Issue date :
2011 06 01
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
Norm
ISO 65:1981
Issue date :
1981 04 01
Carbon steel tubes suitable for screwing in accordance with ISO 7-1
Norm
ÖNORM EN 331
Issue date :
2016 03 15
Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings