Please select and order
€109.76
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 16506
Issue date: 2014 12 15
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (RAPL)
This European Standard specifies performance requirements and test methods for pipes and fittings for the renovation of underground drain and sewer systems by lining with...
Read more
Valid
Publisher:
Austrian Standards International
Format:
Digital | 31 Pages
Language:
German
| English
Optionally co-design standards:
This European Standard specifies performance requirements and test methods for pipes and fittings for the renovation of underground drain and sewer systems by lining with a single rigid annulus of structural cementitious grout formed behind a plastics inner layer. This plastics layer serves as permanent formwork anchored to the grout. It is applicable to plastics inner layers and grout systems with or without steel reinforcement.
This European Standard does not apply to the structural design of the lining system.
ÖNORM EN 16506
2014 12 15
Systems for renovation of drains and sewers - Lining with a rigidly anchored plastics inner layer (R...
Norm
↖
Technische Regel
CEN/TR 14920
Issue date :
2005 03
Jetting resistance of drain and sewer pipes - Moving jet test method
Norm
ÖNORM EN 196-1
Issue date :
2005 04 01
Methods of testing cement - Part 1: Determination of strength
Norm
ÖNORM EN ISO 527-2
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
ÖNORM EN 10048
Issue date :
1996 11 01
Hot rolled narrow steel strip - Tolerances on dimensions and shape
Norm
ÖNORM EN ISO 2039-1
Issue date :
2003 05 01
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
Norm
ÖNORM EN 728
Issue date :
1997 11 01
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Norm
ÖNORM EN 1015-6
Issue date :
2007 03 01
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar (consolidated version)
Norm
ÖNORM EN 1979
Issue date :
1999 10 01
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam
Norm
ÖNORM EN 1542
Issue date :
1999 09 01
Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off
Norm
ÖNORM EN 12814-2
Issue date :
2000 05 01
Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test
Norm
ÖNORM EN 1107-2
Issue date :
2001 04 01
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 12814-8
Issue date :
2003 12 01
Testing of welded joints of thermoplastics semi-finished products - Part 8: Requirements (EN 12814-8:2001 + AC:2003)
Norm
ÖNORM EN ISO 6259-1
Issue date :
2015 07 01
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
Norm
ÖNORM EN 13412
Issue date :
2006 11 01
Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression
Norm
ÖNORM EN ISO 4624
Issue date :
2003 07 01
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
Norm
ÖNORM EN ISO 1183-1
Issue date :
2013 04 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
Norm
ÖNORM EN 14117
Issue date :
2004 11 01
Products and systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products
Norm
ÖNORM EN 10025-2
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Norm
ÖNORM EN 10025-1
Issue date :
2005 02 01
Hot rolled products of structural steels - Part 1: General technical delivery conditions
Norm
ÖNORM EN 14654-1
Issue date :
2014 08 01
Management and control of operational activities in drain and sewer systems outside buildings - Part 1: Cleaning
Norm
ÖNORM EN ISO 11296-1
Issue date :
2011 08 01
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2009)
Norm
ÖNORM EN ISO 1133-1
Issue date :
2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
ÖNORM EN ISO 1133-2
Issue date :
2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
ÖNORM EN 13100-4
Issue date :
2012 12 01
Non destructive testing of welded joints of thermoplastics semifinished products - Part 4: High voltage testing
Norm
ÖNORM EN 13067
Issue date :
2013 10 15
Plastics welding personnel - Qualification testing of welders - Thermoplastics welded assemblies
Norm
ÖNORM EN ISO 11296-7
Issue date :
2013 05 15
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011)
Norm
ÖNORM EN ISO 75-2
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
ÖNORM EN 206
Issue date :
2014 12 01
Concrete - Specification, performance, production and conformity
Technische Regel
CEN/TR 14920
Issue date :
2005 03
Jetting resistance of drain and sewer pipes - Moving jet test method