Please select and order
€84.27
excl. VAT plus shipping costs
CONFIGURE NOW
Norm
ÖNORM EN 15836-1
Issue date: 2010 08 01
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: Homogenous membranes of nominal thickness equal to or greater than 0,75 mm
This European Standard specifies the visual, dimensional, mechanical and durability characteristics of
plasticized poly(vinyl chloride) (PVC-P) homogenous membranes of n...
Read more
Valid
Publisher:
Austrian Standards International
Format:
Digital | 19 Pages
Language:
German
| English
| Download GER/ENG
Optionally co-design standards:
This European Standard specifies the visual, dimensional, mechanical and durability characteristics of
plasticized poly(vinyl chloride) (PVC-P) homogenous membranes of nominal thickness greater than or equal
to 0,75 mm for use as liners for inground swimming pools. It also specifies the characteristics of the
composition of the PVC-P used to produce the membranes.
It applies specifically to homogenous membranes intended for use in swimming pools where the water
temperature is less than or equal to 28 °C. If the membrane manufacturer permits a temperature of water
continuously maintained above 28 °C, this document also applies.
ÖNORM EN 15836-1
2010 08 01
Plastics - Plasticized poly(vinyl chloride) (PVC-P) membranes for inground swimming pools - Part 1: ...
Norm
↖
Norm
ÖNORM EN 438-1
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information
Norm
ÖNORM EN 438-7
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes
Norm
ÖNORM EN 438-5
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 5: Classification and specifications for flooring grade laminates less than 2 mm thick intended for bonding to supporting substrates
Norm
ÖNORM EN 438-6
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 6: Classification and specifications for Exterior-grade Compact laminates of thickness 2 mm and greater
Norm
ÖNORM EN 438-2
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called Laminates) - Part 2: Determination of properties
Norm
ÖNORM EN 438-3
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 3: Classification and specifications for laminates less than 2 mm thick intended for bonding to supporting substrates
Norm
ÖNORM EN 438-4
Issue date :
2005 05 01
High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 4: Classification and specifications for Compact laminates of thickness 2 mm and greater
Norm
ÖNORM EN 20105-A02
Issue date :
1994 11 01
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
Norm
ÖNORM EN ISO 527-3
Issue date :
2003 02 01
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995 + Corr.1:1998 + Corr.2:2001)
Norm
ÖNORM EN ISO 527-1
Issue date :
1996 05 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1: 1994)
Norm
ÖNORM EN ISO 846
Issue date :
1997 09 01
Plastics - Evaluation of the action of microorganisms (ISO 846:1997)
Norm
ÖNORM EN ISO 62
Issue date :
2008 05 01
Plastics - Determination of water absorption (ISO 62:2008)
Norm
ÖNORM EN ISO 5470-1
Issue date :
1999 08 01
Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999)
Norm
ÖNORM EN ISO 175
Issue date :
2000 06 01
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999)
Norm
ÖNORM EN 12310-2
Issue date :
2000 12 01
Flexible sheets for waterproofing - Determination of resistance to tearing - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 12316-2
Issue date :
2000 12 01
Flexible sheets for waterproofing - Determination of peel resistance of joints - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 495-5
Issue date :
2001 02 01
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 1107-2
Issue date :
2001 04 01
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 1848-2
Issue date :
2001 08 01
Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 1850-2
Issue date :
2001 08 01
Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing
Norm
ÖNORM EN 1849-2
Issue date :
2010 01 15
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets
Norm
ÖNORM EN ISO 1183-1
Issue date :
2004 05 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004)
Norm
ÖNORM EN ISO 291
Issue date :
2008 07 01
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Norm
ÖNORM EN ISO 4892-2
Issue date :
2009 11 15
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2006, including Amd 1:2009)