Please select and order
€185.23
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 13445-2
Issue date: 2009 07 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN ...
Read more
Withdrawn
: 2011 02 15
Publisher:
Austrian Standards International
Format:
Digital | 100 Pages
Language:
German
| English
Currently valid:
Optionally co-design standards:
ICS
This Part of this European Standard specifies the requirements for materials (including clad materials) for unfired pressure vessels and supports which are covered by EN 13445-1:2002 and manufactured from metallic materials; it is currently limited to steels with sufficient ductility but it is, for components operating in the creep range, also limited to sufficiently creep ductile materials. It specifies the requirements for the selection, inspection, testing and marking of metallic materials for the fabrication of unfired pressure vessels.
More information (included Amendments) see ¿Preview of cover sheet and Contents¿ (reading-glass).
ÖNORM EN 13445-2
2017 01 01
Unfired pressure vessels - Part 2: Materials (EN 13445-2:2014-09, Issue 3: 2016-07)
Norm
ÖNORM EN 13445-2
2013 11 15
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2009 07 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
↖
ÖNORM EN 13445-2
2007 12 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2007 05 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM EN 13445-2
2004 10 01
Unfired pressure vessels - Part 2: Materials (consolidated version)
Norm
ÖNORM M 7306
1992 07 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure - Design an...
Norm
ÖNORM M 7308
1992 07 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7304
1991 06 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure - Design
Norm
ÖNORM M 7304
1990 07 01
Cylindrical shells of boilers or pressure vessels under internal and external pressure; design
Norm
ÖNORM M 7300
1990 06 01
Calculation of boilers and pressure vessels; design parameters, permissible stresses
Norm
ÖNORM M 7309
1988 09 01
Dished ends of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7311
1987 10 01
Round, square and elliptical tube sheets an tube bundle heat exchangers
Norm
ÖNORM M 7303
1984 04 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7308
1983 08 01
Flat stayed or stiffened ends or plates of boilers or pressure vessels under internal or external pr...
Norm
ÖNORM M 7306
1980 09 01
Flat heads and covers of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7303
1978 12 01
Conical shells of boilers or pressure vessels under internal or external pressure; design
Norm
ÖNORM M 7304
1978 10 01
Cylindrical shells of boilers or pressure vessels under external pressure; design
Norm
ÖNORM M 7301 Bbl 1
1977 11 01
Approximate calculation of reinforcement or openings in walls of boilers or pressure vessels
Norm
Norm
ÖNORM EN ISO 148-1
Issue date :
2010 12 01
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2009)
Norm
ÖNORM EN 10164
Issue date :
2005 03 01
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Norm
ÖNORM EN 20898-2
Issue date :
1994 05 01
Mechanical properties of fasteners - Part 2 : Nuts with specified proof load values - Coarse thread (ISO 898-2:1992)
Norm
ÖNORM EN ISO 3506-1
Issue date :
2010 04 01
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
Norm
ÖNORM EN ISO 3506-2
Issue date :
2010 02 15
Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009)
Norm
ÖNORM EN 10222-3
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
ÖNORM EN 10222-4
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
ÖNORM EN ISO 2566-1
Issue date :
1999 10 01
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984)
Norm
ÖNORM EN ISO 2566-2
Issue date :
1999 11 01
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984)
Norm
ÖNORM EN 10269
Issue date :
2008 02 01
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties (consolidated version)
Norm
ÖNORM EN ISO 898-1
Issue date :
2009 10 01
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2009)
Norm
ÖNORM EN 10028-7
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10273
Issue date :
2008 03 01
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Norm
ÖNORM EN 12074
Issue date :
2000 08 01
Welding consumables - Quality requirements for manufacture, supply and distribution of consumables for welding and allied processes
Norm
ÖNORM EN ISO 204
Issue date :
2009 11 01
Metallic materials - Uniaxial creep testing in tension - Method of test (ISO 204:2009)
Norm
ÖNORM EN 1092-1
Issue date :
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
Norm
ÖNORM EN 764-2
Issue date :
2002 09 01
Pressure equipment - Part 2: Quantities, symbols and units
Norm
ÖNORM EN 10216-4
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
ÖNORM EN 10217-4
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-6
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties (consolidated version)
Norm
ÖNORM EN 10217-3
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10216-3
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
ÖNORM EN 764-3
Issue date :
2002 09 01
Pressure equipment - Part 3: Definition of parties involved
Norm
ÖNORM EN 10028-6
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered
Norm
ÖNORM EN 10028-5
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled
Norm
ÖNORM EN 10028-3
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 764-1
Issue date :
2004 08 01
Pressure equipment - Terminology - Part 1: Pressure, temperature, volume, nominal size
Norm
ÖNORM EN 13479
Issue date :
2005 03 01
Welding consumables - General product standard for filler metals and fluxes for fusion welding of metallic materials
Norm
ÖNORM EN 10253-2
Issue date :
2008 09 01
Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements
Norm
ÖNORM EN 10028-2
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
ÖNORM EN 10028-4
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
ÖNORM EN 13445-5
Issue date :
2011 02 15
Unfired pressure vessels - Part 5: Inspection and testing