Please select and order
€143.05
excl. VAT
CONFIGURE NOW

Preview images

Preview images
Norm

ÖNORM EN 12666-1

Issue date: 2011 12 15

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system

Diese Europäische Norm legt Anforderungen an Rohre, Formstücke und das Rohrleitungssystem für Abwasserkanäle und -leitungen aus Polyethylen (PE) fest, die in erdverlegte...
Read more
Withdrawn : 2020 08 01
Publisher:
Austrian Standards International
Format:
Digital | 50 Pages
Language:
German
Currently valid:
ÖNORM EN 12666-1:2020 08 01
Optionally co-design standards:
Committee 005: Thermoplastics piping system for the transport of fluids and gases
ICS
23.040.20 23.040.45 93.030 91.140.80
Topics show all
Building services engineering & equipment, Supply and disposal systems for buildings, Drainage systems Building services engineering & equipment, Sewage water engineering, External sewage systems Building services engineering & equipment, Sewage water engineering, Drainage systems Construction products, Plastics pipes, Plastics fittings Construction products, Plastics pipes, Plastics pipes
Diese Europäische Norm legt Anforderungen an Rohre, Formstücke und das Rohrleitungssystem für Abwasserkanäle und -leitungen aus Polyethylen (PE) fest, die in erdverlegten Schwerkraftentwässerungssystemen - außerhalb der Gebäudestruktur (Anwendungskennzeichen ¿U") sowie - innerhalb der Gebäudestruktur (Anwendungskennzeichen ¿D") und außerhalb der Gebäudestruktur eingesetzt werden. Die Wahl des Anwendungsgebietes wird durch die Kennzeichnung ¿U" bzw. ¿UD" der Rohrleitungsteile angezeigt. Sie legt auch die Prüfparameter für die Prüfverfahren fest, auf die in dieser Europäischen Norm verwiesen wird. Diese Europäische Norm enthält Festlegungen für Nennweiten, Rohrserien sowie Steifigkeitsklassen und gibt Empfehlungen für die Auswahl der Einfärbung von Rohrleitungsteilen.
ÖNORM EN 12666-1
2020 08 01
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Par...
Norm
ÖNORM EN 12666-1
2011 12 15
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Par...
Norm
↖
ÖNORM EN 12666-1
2006 08 01
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Par...
Norm
Norm
ISO 11357-6:2008
Issue date : 2008 06 10
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (Corrected version 2008-11)
Norm
ISO 13254:2010
Issue date : 2010 04 19
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
Norm
ISO 13257:2010
Issue date : 2010 05 25
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
Norm
ISO 13259:2010
Issue date : 2010 04 27
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
Norm
ISO 13263:2010
Issue date : 2010 04 15
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
Norm
ISO 13264:2010
Issue date : 2010 05 25
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
Norm
ÖNORM EN ISO 9969
Issue date : 2008 03 01
Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2007)
Norm
ÖNORM EN 1519-1
Issue date : 2000 01 01
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
Norm
ÖNORM EN ISO 472
Issue date : 2002 02 01
Plastics - Vocabulary (ISO 472:1999)
Norm
ÖNORM EN ISO 1043-1
Issue date : 2012 02 15
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
Norm
ÖNORM EN ISO 1183-1
Issue date : 2013 04 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
Norm
ÖNORM EN ISO 580
Issue date : 2005 06 01
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)
Norm
ÖNORM EN ISO 3126
Issue date : 2005 06 01
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005)
Norm
ÖNORM EN ISO 2505
Issue date : 2005 10 01
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005)
Norm
ÖNORM EN ISO 1133-2
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
ÖNORM EN ISO 1133-1
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
ÖNORM EN ISO 1167-1
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN 1401-1
Issue date : 2009 10 01
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
Norm
ISO 11357-6:2018
Issue date : 2018 03 09
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Norm
ISO 13254:2010
Issue date : 2010 04 19
Thermoplastics piping systems for non-pressure applications — Test method for watertightness
Norm
ISO 13257:2018
Issue date : 2018 11 08
Thermoplastics piping systems for non-pressure applications — Test method for resistance to elevated temperature cycling
Norm
ISO 13259:2020
Issue date : 2020 07 16
Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
Norm
ISO 13263:2010
Issue date : 2010 04 15
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for impact strength
Norm
ISO 13264:2010
Issue date : 2010 05 25
Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics fittings — Test method for mechanical strength or flexibility of fabricated fittings
Norm
ÖNORM EN 12666-1
Issue date : 2020 08 01
Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system