Please select and order
€84.27
excl. VAT
CONFIGURE NOW

Preview images

Preview images
Norm

ÖNORM EN 12201-1

Issue date: 2012 03 01

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General

This Part of EN 12201 specifies the general aspects of polyethylene (PE) pressure piping systems (mains and service pipes) for buried or above ground applications, inten...
Read more
Withdrawn : 2015 12 01
Publisher:
Austrian Standards International
Format:
Digital | 24 Pages
Language:
German
Currently valid:
ÖNORM EN 12201-1:2023 07 15
Optionally co-design standards:
Committee 005: Thermoplastics piping system for the transport of fluids and gases
ICS
23.040.20 93.025 93.030
Topics
Building services engineering & equipment, Sewage water engineering, External sewage systems Building services engineering & equipment, Water supply, External water conveyance systems Construction products, Plastics pipes, Plastics pipes
This Part of EN 12201 specifies the general aspects of polyethylene (PE) pressure piping systems (mains and service pipes) for buried or above ground applications, intended for the conveyance of water for human consumption, including raw water prior to treatment, drainage and sewerage under pressure, vacuum sewer systems, and water for other purposes
ÖNORM EN 12201-1
2023 07 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2015 12 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
ÖNORM EN 12201-1
2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylen...
Norm
↖
ÖNORM EN 12201-1
2008 04 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 13244-1
2008 04 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes,...
Norm
ÖNORM EN 12201-1
2003 08 01
Plastics piping systems for water supply - Polyethylene (PE) - Part 1: General
Norm
ÖNORM EN 13244-1
2003 08 01
Plastics piping systems for buried and above-ground pressure systems for water for general purposes,...
Norm
ÖNORM B 5170
2001 05 01
Low density polyethylene pipes (PE 40) for water pipelines - Dimensions, requirements, tests, markin...
Norm
ÖNORM B 5172
2000 04 01
High density polyethylene pipes (PE 80, PE 100) for water pipelines - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1999 11 01
High density polyethylene pipes (PE 80, PE 100) for water pipelines - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1995 10 01
Pipes of polyethylene high density (PE-HD) for water supply systems - Dimensions, requirements, test...
Norm
ÖNORM B 5172
1990 08 01
Pipes of polyethylene high density (PE-HD) for water supply systems; dimensions, requirements, tests...
Norm
ÖNORM B 5172
1980 06 01
Pipes of high density polyethylene for water supply systems; dimensions and technical delivery requi...
Norm
ÖNORM B 5170
1977 01 01
Pipes of low density polyethylene for water supply systems; dimensions and technical specification
Norm
ÖNORM B 5172
1976 04 01
Pipes of high density polyethylene for water supply systems; dimensions and technical delivery requi...
Norm
ÖNORM B 5171
1964 02 01
Rohre aus PE-weich (Weichpolyäthylen) für Wasserversorgungsanlagen; technische Lieferbedingungen
Norm
ÖNORM B 5173
1964 02 01
Rohre aus PE-hart (Hartpolyäthylen) für Wasserversorungsanlagen; Technische Lieferbedingungen
Norm
ÖNORM B 5172
1962 02 01
Rohre aus PE-hart (Hartpolyäthylen) für Wasserversorungsanlagen; Abmessungen und Gewichte
Norm
ÖNORM B 5170
1962 02 01
Rohre aus PE-weich (Weichpolyäthylen) für Wasserversorgungsanlagen; Abmessungen und Gewichte
Norm
Historie aufklappen
Norm
ISO 6964:1986
Issue date : 1986 12 11
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification
Norm
ISO 11357-6:2008
Issue date : 2008 06 10
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT) (Corrected version 2008-11)
Norm
ISO 13953:2001
Issue date : 2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
ISO 13954:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
ISO 18553:2002
Issue date : 2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Norm
ÖNORM EN ISO 12162
Issue date : 2010 03 01
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
Norm
ÖNORM EN 12099
Issue date : 1997 10 01
Plastics piping systems - Polyethylene piping materials and components - Determination of volatile content
Norm
ÖNORM EN ISO 13479
Issue date : 2010 05 01
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009)
Norm
ÖNORM EN ISO 13478
Issue date : 2007 11 01
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Full-scale test (FST) (ISO 13478:2007)
Norm
ÖNORM EN ISO 472
Issue date : 2013 07 01
Plastics - Vocabulary (ISO 472:2013) (multilingual Version: en/fr/de)
Norm
ÖNORM EN ISO 6259-1
Issue date : 2015 07 01
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)
Norm
ÖNORM EN ISO 1043-1
Issue date : 2012 02 15
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics (ISO 1043-1:2011)
Norm
ÖNORM EN 12201-4
Issue date : 2012 03 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4: Valves
Norm
ÖNORM EN ISO 9080
Issue date : 2013 04 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
Norm
ÖNORM EN ISO 16871
Issue date : 2003 12 01
Plastics piping and ducting systems - Plastics pipes and fittings - Method for exposure to direct (natural) weathering (ISO 16871:2003)
Norm
ÖNORM EN ISO 1183-1
Issue date : 2013 04 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012)
Norm
ÖNORM EN ISO 1183-2
Issue date : 2004 10 01
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
Norm
ÖNORM EN ISO 1133-1
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011)
Norm
ÖNORM EN ISO 1133-2
Issue date : 2012 03 15
Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
Norm
ÖNORM EN ISO 1167-1
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 1167-2
Issue date : 2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 13477
Issue date : 2008 08 01
Thermoplastics pipes for the conveyance of fluids - Determination of resistance to rapid crack propagation (RCP) - Small-scale steady-state test (S4 test) (ISO 13477:2008)
Norm
ÖNORM EN ISO 15512
Issue date : 2014 12 01
Plastics - Determination of water content (ISO 15512:2014)
Norm
ÖNORM EN 12201-3
Issue date : 2013 04 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3: Fittings
Norm
ÖNORM EN 12201-2
Issue date : 2013 11 15
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 2: Pipes
Norm
ISO 6259-3:2015
Issue date : 2015 06 07
Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes
Norm
ISO 6964:2019
Issue date : 2019 02 27
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
Norm
ISO 11357-6:2018
Issue date : 2018 03 09
Plastics — Differential scanning calorimetry (DSC) — Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
Norm
ISO 11413:2008
Issue date : 2008 12 11
Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting
Norm
ISO 11414:2009
Issue date : 2009 01 29
Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion
Norm
ISO 13953:2001
Issue date : 2001 10 25
Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
Norm
ISO 13954:1997
Issue date : 1997 12 25
Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
Norm
ISO 18553:2002
Issue date : 2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Norm
ÖNORM EN 12201-1
Issue date : 2015 12 01
Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General