Please select and order
€229.44
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 1092-1
Issue date: 2013 05 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
This European Standard for a single series of flanges specifies requirements for circular steel flanges in PN desig-nations PN 2,5 to PN 400 and nominal sizes from DN 10 ...
Read more
Withdrawn
: 2014 06 15
Publisher:
Austrian Standards International
Format:
Digital | 127 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This European Standard for a single series of flanges specifies requirements for circular steel flanges in PN desig-nations PN 2,5 to PN 400 and nominal sizes from DN 10 to DN 4000.
This European Standard specifies the flange types and their facings, dimensions, tolerances, threading, bolt sizes, flange jointing face surface finish, marking, materials, pressure/ temperature ratings and approximate flange masses.
For the purpose of this European Standard, "flanges" include also lapped ends and collars.
This European Standard applies to flanges manufactured in accordance with the methods described in Table 1.
Non-gasketed pipe joints are outside the scope of this European Standard.
ÖNORM EN 1092-1
2018 10 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2014 07 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2014 06 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2013 05 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
↖
ÖNORM EN 1092-1
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2002 04 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
Norm
ÖNORM EN ISO 6708
Issue date :
1995 10 01
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
Norm
ÖNORM EN ISO 1127
Issue date :
1996 08 01
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
Norm
ÖNORM EN 1333
Issue date :
2006 05 01
Flanges and their joints - Pipework components - Definition and selection of PN
Norm
ÖNORM EN ISO 3452-1
Issue date :
2013 10 01
Non-destructive testing - Penetrant testing - Part 1: General principles (ISO 3452-1:2013)
Norm
ÖNORM EN ISO 14732
Issue date :
2013 11 01
Welding personnel - Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials (ISO 14732:2013)
Norm
ÖNORM EN ISO 9692-2/AC1
Issue date :
1999 11 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) (Corrigendum)
Norm
ÖNORM EN ISO 9692-2
Issue date :
1998 12 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
Norm
ÖNORM EN 10222-4
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
ÖNORM EN 10222-3
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
ÖNORM EN 10160
Issue date :
1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
ÖNORM EN 10222-2
Issue date :
2000 04 01
Steel forgings for pressure purposes - Part 2: Ferritic and martesitic steels with specified elevated temperature properties
Norm
ÖNORM EN 10222-5
Issue date :
2000 03 01
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
Norm
ÖNORM EN 10028-7
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10273
Issue date :
2008 03 01
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Norm
ÖNORM EN ISO 887
Issue date :
2006 04 01
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) (consolidated version)
Norm
ÖNORM EN 10217-3
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10217-2
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 764-5
Issue date :
2003 02 01
Pressure equipment - Part 5: Compliance and inspection documentation of materials
Norm
ÖNORM EN 10220
Issue date :
2003 04 01
Seamless and welded steel tubes - Dimensions and masses per unit length
Norm
ÖNORM EN 10028-3
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 10216-5
Issue date :
2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 4014
Issue date :
2005 03 01
Aerospace series - Inserts, thickwall, self-locking - Design standard
Norm
ÖNORM EN 10217-7
Issue date :
2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10226-3
Issue date :
2005 05 01
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
Norm
ÖNORM EN ISO 15614-13
Issue date :
2012 10 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
Norm
ÖNORM EN ISO 10675-1
Issue date :
2013 10 01
Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008)
Norm
ÖNORM EN 10028-4
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
ÖNORM EN 10028-2
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
ÖNORM EN 13445-3
Issue date :
2013 11 15
Unfired pressure vessels - Part 3: Design (consolidated version)
Norm
ÖNORM EN ISO 23278
Issue date :
2009 12 15
Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006)
Norm
ÖNORM EN ISO 23277
Issue date :
2009 12 15
Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006)
Norm
ÖNORM EN ISO 17638
Issue date :
2009 12 15
Non-destructive testing of welds - Magnetic particle testing (ISO 17638:2003)
Norm
ÖNORM EN 1708-1
Issue date :
2010 02 15
Welding - Basic welded joint details in steel - Part 1: Pressurized components
Norm
ÖNORM EN ISO 11666
Issue date :
2011 03 15
Non-destructive testing of welds - Ultrasonic testing - Acceptance levels (ISO 11666:2010)
Norm
ÖNORM EN ISO 17640
Issue date :
2011 06 01
Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels and assessment (ISO 17640:2010)
Norm
ÖNORM EN ISO 17637
Issue date :
2011 04 15
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
Norm
ÖNORM EN ISO 9606-1
Issue date :
2014 04 15
Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012)
Norm
ÖNORM EN ISO 9712
Issue date :
2013 01 01
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
Norm
ÖNORM EN 10216-3
Issue date :
2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes
Norm
ÖNORM EN 10216-4
Issue date :
2014 02 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ÖNORM EN 1092-1
Issue date :
2014 06 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges (consolidated version)