Please select and order
€248.70
excl. VAT
CONFIGURE NOW
Norm
ÖNORM EN 1092-1
Issue date: 2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges
This Standard for a single series of flanges specifies requirements for circular steel flanges in PN desig-nations PN 2,5 to PN 400 and nominal sizes from DN 10 to DN 400...
Read more
Withdrawn
: 2013 05 15
Publisher:
Austrian Standards International
Format:
Digital | 125 Pages
Language:
German
| English
| Download GER/ENG
Currently valid:
Optionally co-design standards:
ICS
This Standard for a single series of flanges specifies requirements for circular steel flanges in PN desig-nations PN 2,5 to PN 400 and nominal sizes from DN 10 to DN 4000. This standard specifies the flange types and their facings, dimensions, tolerances, threading, bolt sizes, flange jointing face surface finish, marking, materials, pressure/ temperature ratings and approximate flange masses. This standard applies to flanges manufactured in accordance with the methods described in Table 1. This standard does not apply to flanges made from bar stock according to ÖNORM EN 10272 by turning. Non-gasketed pipe joints are outside the scope of this Standard.
ÖNORM EN 1092-1
2018 10 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2014 07 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2014 06 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2013 05 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
ÖNORM EN 1092-1
2007 11 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
↖
ÖNORM EN 1092-1
2002 04 01
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designat...
Norm
Norm
ÖNORM EN ISO 6708
Issue date :
1995 10 01
Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995)
Norm
ÖNORM EN ISO 1127
Issue date :
1996 08 01
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length (ISO 1127:1992)
Norm
ÖNORM EN 1333
Issue date :
2006 05 01
Flanges and their joints - Pipework components - Definition and selection of PN
Norm
ÖNORM EN 571-1
Issue date :
1997 04 01
Non destructive testing - Penetrant testing - Part 1: General principles
Norm
ÖNORM EN ISO 17637
Issue date :
2011 04 15
Non-destructive testing of welds - Visual testing of fusion-welded joints (ISO 17637:2003)
Norm
ÖNORM EN 1418
Issue date :
1998 03 01
Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials
Norm
ÖNORM EN ISO 9692-2/AC1
Issue date :
1999 11 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) (Corrigendum)
Norm
ÖNORM EN ISO 9692-2
Issue date :
1998 12 01
Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998)
Norm
ÖNORM EN 10222-3
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 3: Nickel steels with specified low temperature properties
Norm
ÖNORM EN 10222-4
Issue date :
1999 10 01
Steel forgings for pressure purposes - Part 4: Weldable fine grain steels with high proof strength
Norm
ÖNORM EN 10160
Issue date :
1999 10 01
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method)
Norm
ÖNORM EN 10222-2
Issue date :
2000 04 01
Steel forgings for pressure purposes - Part 2: Ferritic and martesitic steels with specified elevated temperature properties
Norm
ÖNORM EN 10222-5
Issue date :
2000 03 01
Steel forgings for pressure purposes - Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels
Norm
ÖNORM EN 10028-7
Issue date :
2008 03 01
Flat products made of steels for pressure purposes - Part 7: Stainless steels
Norm
ÖNORM EN 10273
Issue date :
2008 03 01
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties
Norm
ÖNORM EN ISO 887
Issue date :
2006 04 01
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000) (consolidated version)
Norm
ÖNORM EN 10216-3
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (EN 10216-3:2002 + A1:2004)
Norm
ÖNORM EN 10216-4
Issue date :
2004 07 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties (EN 10216-4:2002 + A1:2004)
Norm
ÖNORM EN 10217-3
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes (consolidated version)
Norm
ÖNORM EN 10217-2
Issue date :
2007 09 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties (consolidated version)
Norm
ÖNORM EN 764-5
Issue date :
2003 02 01
Pressure equipment - Part 5: Compliance and inspection documentation of materials
Norm
ÖNORM EN 10220
Issue date :
2003 04 01
Seamless and welded steel tubes - Dimensions and masses per unit length
Norm
ÖNORM EN 10028-3
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
Norm
ÖNORM EN 10216-5
Issue date :
2005 01 01
Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
Norm
ÖNORM EN 4014
Issue date :
2005 03 01
Aerospace series - Inserts, thickwall, self-locking - Design standard
Norm
ÖNORM EN 10217-7
Issue date :
2005 06 01
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
Norm
ÖNORM EN 10226-3
Issue date :
2005 05 01
Pipes threads where pressure tight joint are made on the threads - Part 3: Verification by means of limit gauges
Norm
ÖNORM EN ISO 15614-13
Issue date :
2012 10 01
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2012)
Norm
ÖNORM EN 12517-1
Issue date :
2006 05 01
Non-destructive testing of welds - Part 1: Evaluation of welded joints in steel, nickel, titanium and their alloys by radiography - Acceptance levels
Norm
ÖNORM EN ISO 5817
Issue date :
2007 10 01
Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006)
Norm
ÖNORM EN ISO 9712
Issue date :
2013 01 01
Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012)
Norm
ÖNORM EN 10028-2
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
Norm
ÖNORM EN 10028-4
Issue date :
2009 11 01
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties
Norm
ÖNORM EN 1708-1
Issue date :
2010 02 15
Welding - Basic welded joint details in steel - Part 1: Pressurized components
Norm
ÖNORM EN 287-1
Issue date :
2011 09 01
Qualification test of welders - Fusion welding - Part 1: Steels
Norm
ISO 7-1:1994
Issue date :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 2768-1:1989
Issue date :
1989 11 02
General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
Norm
ÖNORM EN 1092-1
Issue date :
2013 05 15
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges