Please select and order
€120.67
excl. VAT
CONFIGURE NOW
Norm
ÖNORM B 5164
Issue date: 2013 03 01
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques - Complementary provisions to ÖNORM ISO 25780
This standard complements ÖNORM ISO 25780 and has to be applied together for piping systems and its components made from glass-reinforced thermosetting plastics (GRP) bas...
Read more
Withdrawn
: 2019 04 01
Publisher:
Austrian Standards International
Format:
Digital | 23 Pages
Language:
English
Optionally co-design standards:
Topics
This standard complements ÖNORM ISO 25780 and has to be applied together for piping systems and its components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply, irrigation, drainage or sewerage systems with or without pressure. This standard consists of additional requirements, which are not in contradiction with ÖNORM ISO 25780, which have to be fullfilled for the procedure for proof of conformity according to the National Foreword and Annex to ÖNORM ISO 25780.
ÖNORM B 5164
2013 03 01
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage...
Norm
↖
Norm
ÖNORM A 5561
Issue date :
2001 11 01
Determination of settled and compacted apparent densities of powders and granulated materials
Norm
ÖNORM B 2503
Issue date :
2012 08 01
Drain and sewer systems - Design, construction, testing, operation - Complementary provisions concering ÖNORM EN 476, EN 752 and EN 1610
Norm
ÖNORM B 5014-1
Issue date :
2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5014-3
Issue date :
2012 06 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials
Norm
ÖNORM B 5161
Issue date :
2014 09 01
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN 1796 and ÖNORM EN 14364
Norm
ÖNORM EN 59
Issue date :
1978 05 01
Glass reinforced plastics; measurement of hardness by means of a barcol-impressor
Norm
ÖNORM EN 59
Issue date :
2014 03 15
Glass reinforced plastics - Measurement of hardness by means of a Barcol impressor
Norm
ÖNORM EN 681-1
Issue date :
2007 07 01
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
Norm
ÖNORM EN 1394
Issue date :
1997 02 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
Norm
ÖNORM EN 13501-1
Issue date :
2009 12 01
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 13823
Issue date :
2011 01 01
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
ÖNORM EN ISO 75-1
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013)
Norm
ÖNORM EN ISO 75-2
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
ÖNORM EN ISO 1172
Issue date :
1999 01 01
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods (ISO 1172:1996)
Norm
ÖNORM ISO 25780
Issue date :
2013 03 01
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
Norm
ISO 1887:2014
Issue date :
2014 08 27
Textile glass — Determination of combustible-matter content
Norm
ISO 2559:2011
Issue date :
2011 11 23
Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications
Norm
ISO 3374:2000
Issue date :
2000 06 22
Reinforcement products — Mats and fabrics — Determination of mass per unit area
Norm
ISO 4633:2002
Issue date :
2002 05 09
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials (Corrected version 2004-04)
Draft
ISO/DIS 4633
Issue date :
2014 08 19
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
Norm
ISO 7509:2000
Issue date :
2000 07 06
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
Final Draft
ISO/FDIS 7509
Issue date :
2014 09 09
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
Norm
ISO 7685:1998
Issue date :
1998 07 16
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial specific ring stiffness
Norm
ISO 8521:2009
Issue date :
2009 08 06
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test methods for the determination of the apparent initial circumferential tensile strength
Norm
ISO 8639:2000
Issue date :
2000 03 16
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness of flexible joints
Norm
ISO 10466:1997
Issue date :
1997 11 06
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
Norm
ISO 10468:2003
Issue date :
2003 11 21
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the long-term specific ring creep stiffness under wet conditions and calculation of the wet creep factor
Norm
ISO 10952:2014
Issue date :
2014 03 24
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
Technische Regel
CEN/TR 15729
Issue date :
2010 08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
Technische Regel
ONR 25161
Issue date :
2011 10 01
Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
Technische Regel
ONR CEN/TS 14632
Issue date :
2012 08 01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)
Norm
ÖNORM EN ISO 11925-2
Issue date :
2011 02 15
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010)
Norm
ÖNORM EN 1120
Issue date :
1997 07 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of ....(abbreviated)
Norm
ÖNORM EN 1228
Issue date :
1997 01 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
Norm
ÖNORM EN 1447
Issue date :
2011 06 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
Norm
ÖNORM EN ISO 178
Issue date :
2013 09 15
Plastics - Determination of flexural properties (ISO 178:2010+Amd 1:2013) (consolidated version)
Norm
ÖNORM EN ISO 527-1
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
Norm
ÖNORM EN ISO 527-2
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
ÖNORM EN ISO 787-2
Issue date :
1995 07 01
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:1981)
Norm
ÖNORM EN ISO 2555
Issue date :
1999 12 01
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method (ISO 2555:1989)
Norm
ÖNORM EN ISO 3344
Issue date :
1997 09 01
Reinforcement products - Determination of moisture content (ISO 3344:1997)
Norm
ÖNORM A 5561
Issue date :
2001 11 01
Determination of settled and compacted apparent densities of powders and granulated materials
Norm
ÖNORM B 2503
Issue date :
2017 11 01
Drain and sewer systems - Design, construction, testing, operation - Complementary provisions concering ÖNORM EN 476, ÖNORM EN 752 and ÖNORM EN 1610
Norm
ÖNORM B 5014-1
Issue date :
2016 08 15
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 1: Organic materials
Norm
ÖNORM B 5014-3
Issue date :
2017 05 01
Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials
Norm
ÖNORM B 5161
Issue date :
2022 01 15
Plastics piping systems for water supply and for drainage and sewerage with or without pressure - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Supplementary requirements to ÖNORM EN ISO 23856
Norm
ÖNORM EN 59
Issue date :
2016 05 15
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester
Norm
ÖNORM EN 681-1
Issue date :
2007 07 01
Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber
Norm
ÖNORM EN 1120
Issue date :
1997 07 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of ....(abbreviated)
Norm
ÖNORM EN 1228
Issue date :
1997 01 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness
Norm
ÖNORM EN 1394
Issue date :
1997 02 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength
Norm
ÖNORM EN 1447
Issue date :
2011 06 01
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
Norm
ÖNORM EN 13501-1
Issue date :
2020 01 15
Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests
Norm
ÖNORM EN 13823
Issue date :
2023 04 01
Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item
Norm
ÖNORM EN ISO 75-1
Issue date :
2020 05 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
Norm
ÖNORM EN ISO 75-2
Issue date :
2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
ÖNORM EN ISO 178
Issue date :
2019 08 01
Plastics - Determination of flexural properties (ISO 178:2019)
Norm
ÖNORM EN ISO 527-1
Issue date :
2019 12 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
Norm
ÖNORM EN ISO 527-2
Issue date :
2012 05 15
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
Norm
ÖNORM EN ISO 787-2
Issue date :
2021 11 01
General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 °C (ISO 787-2:2021)
Norm
ÖNORM EN ISO 1172
Issue date :
2023 11 15
Textile-glass-reinforced plastics - Prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content using calcination methods (ISO 1172:2023)
Norm
ÖNORM EN ISO 2555
Issue date :
2018 10 15
Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018)
Norm
ÖNORM EN ISO 3344
Issue date :
1997 09 01
Reinforcement products - Determination of moisture content (ISO 3344:1997)
Norm
ÖNORM EN ISO 11925-2
Issue date :
2020 06 15
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2020)
Norm
ÖNORM ISO 25780
Issue date :
2018 11 15
Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
Norm
ISO 1887:2014
Issue date :
2014 08 27
Textile glass — Determination of combustible-matter content
Norm
ISO 7509:2015
Issue date :
2015 03 04
Plastics piping systems — Glass-reinforced thermosetting plastics (GRP) pipes — Determination of time to failure under sustained internal pressure
Norm
ISO 7685:2019
Issue date :
2019 07 11
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of initial ring stiffness
Norm
ISO 8521:2020
Issue date :
2020 07 09
Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength
Norm
ISO 8639:2016
Issue date :
2016 02 18
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Test methods for leaktightness and proof of structural design of flexible joints
Norm
ISO 10466:2021
Issue date :
2021 04 12
Glass-reinforced thermosetting plastics (GRP) pipes — Test method to prove the resistance to initial ring deflection
Norm
ISO 10468:2018
Issue date :
2018 05 03
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
Norm
ISO 10952:2021
Issue date :
2021 03 31
Glass-reinforced thermosetting plastics (GRP) pipes and fittings — Determination of the resistance to chemical attack for the inside of a section in a deflected condition
Technische Regel
CEN/TR 15729
Issue date :
2010 08
Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Report on the determination of mean abrasion after a defined number of test cycles
Technische Regel
ONR 25161
Issue date :
2011 10 01
Piping systems for hydropower plants - Pipes, joints and fittings made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP)
Technische Regel
ONR CEN/TS 14632
Issue date :
2012 08 01
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (CEN/TS 14632:2012)