Please select and order
€64.38
excl. VAT
CONFIGURE NOW
Norm
ÖNORM B 5151
Issue date: 2009 01 01
Plastics pipes systems - Colouration of polyolefins for hot and cold water supply systems by means of masterbatch - Requirements and testing
Diese ÖNORM legt Anforderungen, Prüfungen und Beurteilungskriterien für die Selbsteinfärbung bzw. ergänzende Additivierung mittels Masterbatches von entsprechenden PE-RT,...
Read more
Valid
Publisher:
Austrian Standards International
Format:
Digital | 12 Pages
Language:
German
Optionally co-design standards:
Diese ÖNORM legt Anforderungen, Prüfungen und Beurteilungskriterien für die Selbsteinfärbung bzw. ergänzende Additivierung mittels Masterbatches von entsprechenden PE-RT, PP, PB, und PE-X Basismaterialien fest, die für die Warm- und Kaltwasserinstallation innerhalb von Gebäuden, für den Transport von Trink- oder Brauchwasser (Hausinstallation) sowie für Heizungsanlagen zum Einsatz kommen, und dient zur Sicherstellung, dass die relevanten Eigenschaften des Basismaterials nicht nachteilig beeinflusst werden. Festlegungen über den Prüfumfang und die Prüfhäufigkeit im Rahmen der Erstprüfung, Fremd- und Eigenüberwachung erfolgen in den jeweiligen Produktnormen für den relevanten Anwendungsbereich.
ÖNORM B 5151
2009 01 01
Plastics pipes systems - Colouration of polyolefins for hot and cold water supply systems by means o...
Norm
↖
Norm
ISO 18553:2002
Issue date :
2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Norm
ÖNORM B 5158
Issue date :
2001 10 01
Plastics pipes made of polypropylene-random-copolymerisate (PP-R) with oval diameter, coated or uncoated, for low temperature radiant heating systems - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5159
Issue date :
2007 03 01
Plastics piping systems of polyethylene with raised temperature resistance (PE-RT) for hot and cold water installations - Dimensions, requirements, tests, proof of conformity
Norm
ÖNORM B 5174
Issue date :
2007 03 01
Pipes of polypropylene for special applications - Dimensions, requirements, tests, proof of conformity
Norm
ÖNORM EN 12107
Issue date :
1998 05 01
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of ..........(abbreviated)
Norm
ÖNORM EN 12877-2
Issue date :
2000 01 01
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
Norm
ÖNORM EN 13900-5
Issue date :
2005 07 01
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
Norm
ÖNORM EN 579
Issue date :
1993 10 01
Plastic piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction
Norm
ÖNORM EN 728
Issue date :
1997 11 01
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Norm
ÖNORM EN ISO 1133
Issue date :
2005 10 01
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
Norm
ÖNORM EN ISO 1167-1
Issue date :
2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 1167-2
Issue date :
2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 1167-3
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
Norm
ÖNORM EN ISO 1167-4
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
Norm
ÖNORM EN ISO 1183-1
Issue date :
2004 05 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004)
Norm
ÖNORM EN ISO 12162
Issue date :
1997 07 01
Classification of thermoplastic materials in pipe form based on the resistance against internal hydrostatic pressure - Material designation and calculations (ISO 12162:1995)
Norm
ÖNORM EN ISO 12162
Issue date :
2008 09 01
Thermoplastics materials for pipes and fittings for pressure applications - Classification, design coefficient, and designation (ISO/DIS 12162:2008)
Norm
ÖNORM EN ISO 15874-1
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-2
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15874-3
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2003)
Norm
ÖNORM EN ISO 15874-5
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 5: Fitness for purpose of the system (ISO 15874-5:2003)
Norm
ÖNORM EN ISO 15875-1
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-3
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003)
Norm
ÖNORM EN ISO 15875-5
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003)
Norm
ÖNORM EN ISO 15876-1
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 1: General (ISO 15876-1:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-2
Issue date :
2008 03 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 2: Pipes (ISO 15876-2:2003 + Amd 1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15876-3
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 3: Fittings (ISO 15876-3:2003)
Norm
ÖNORM EN ISO 15876-5
Issue date :
2004 06 01
Plastics piping systems for hot and cold water installations - Polybutylene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2003)
Norm
ÖNORM EN ISO 21003-1
Issue date :
2008 12 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008)
Norm
ÖNORM EN ISO 21003-2
Issue date :
2008 12 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes (ISO 21003-2:2008)
Norm
ÖNORM EN ISO 21003-3
Issue date :
2008 12 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008)
Norm
ÖNORM EN ISO 21003-5
Issue date :
2008 12 01
Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008)
Norm
ÖNORM EN ISO 9080
Issue date :
2003 10 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003)
Norm
ÖNORM B 5157
Issue date :
1999 04 01
Systems of composite plastics pipes for hot and cold water - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5158
Issue date :
2001 10 01
Plastics pipes made of polypropylene-random-copolymerisate (PP-R) with oval diameter, coated or uncoated, for low temperature radiant heating systems - Dimensions, requirements, tests, marking of conformity
Norm
ÖNORM B 5159
Issue date :
2007 03 01
Plastics piping systems of polyethylene with raised temperature resistance (PE-RT) for hot and cold water installations - Dimensions, requirements, tests, proof of conformity
Norm
ÖNORM B 5174
Issue date :
2007 03 01
Pipes of polypropylene for special applications - Dimensions, requirements, tests, proof of conformity
Norm
ÖNORM EN 579
Issue date :
1993 10 01
Plastic piping systems - Crosslinked polyethylene (PE-X) pipes - Determination of degree of crosslinking by solvent extraction
Norm
ÖNORM EN 728
Issue date :
1997 11 01
Plastics piping and ducting systems - Polyolefin pipes and fittings - Determination of oxidation induction time
Norm
ÖNORM EN 12107
Issue date :
1998 05 01
Plastics piping systems - Injection-moulded thermoplastics fittings, valves and ancillary equipment - Determination of the long-term hydrostatic strength of ..........(abbreviated)
Norm
ÖNORM EN 12877-2
Issue date :
2000 01 01
Colouring materials in plastics - Determination of colour stability to heat during processing of colouring materials in plastics - Part 2: Determination by injection moulding
Norm
ÖNORM EN 13900-5
Issue date :
2005 07 01
Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test
Norm
ÖNORM EN 20105-A02
Issue date :
1994 11 01
Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)
Norm
ÖNORM EN ISO 105-B01
Issue date :
2014 12 01
Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014)
Norm
ÖNORM EN ISO 1133
Issue date :
2005 10 01
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
Norm
ÖNORM EN ISO 1167-1
Issue date :
2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006)
Norm
ÖNORM EN ISO 1167-2
Issue date :
2006 07 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006)
Norm
ÖNORM EN ISO 1167-3
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007)
Norm
ÖNORM EN ISO 1167-4
Issue date :
2008 03 01
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007)
Norm
ÖNORM EN ISO 1183-1
Issue date :
2019 07 15
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019)
Norm
ÖNORM EN ISO 9080
Issue date :
2013 04 01
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012)
Norm
ÖNORM EN ISO 12162
Issue date :
2010 03 01
Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009)
Norm
ÖNORM EN ISO 15874-1
Issue date :
2023 02 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013 + Amd.1:2022) (consolidated version)
Norm
ÖNORM EN ISO 15874-2
Issue date :
2023 02 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes (ISO 15874-2:2013 + Amd.1:2018 + Amd.2:2022) (consolidated version)
Norm
ÖNORM EN ISO 15874-3
Issue date :
2022 11 01
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd.1:2018 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15874-5
Issue date :
2021 11 01
Plastics piping systems for hot and cold water installations — Polypropylene (PP) — Part 5: Fitness for purpose of the system (ISO 15874-5:2013 + Amd.1:2018) (consolidated version)
Norm
ÖNORM EN ISO 15875-1
Issue date :
2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2003 + Amd.1:2007) (consolidated version)
Norm
ÖNORM EN ISO 15875-2
Issue date :
2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2003 + Amd 1:2007 + Amd 2:2020) (consolidated version)
Norm
ÖNORM EN ISO 15875-3
Issue date :
2022 04 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd.1:2020 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15875-5
Issue date :
2021 07 01
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2003 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15876-1
Issue date :
2021 11 01
Plastics piping systems for hot and cold water installations – Polybutene (PB) – Part 1: General (ISO 15876-1:2017)
Norm
ÖNORM EN ISO 15876-2
Issue date :
2021 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 15876-3
Issue date :
2022 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd.1:2020 + Amd.2:2021) (consolidated version)
Norm
ÖNORM EN ISO 15876-5
Issue date :
2021 11 01
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 5: Fitness for purpose of the system (ISO 15876-5:2017 + Amd.1:2020) (consolidated version)
Norm
ÖNORM EN ISO 21003-1
Issue date :
2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General
Norm
ÖNORM EN ISO 21003-2
Issue date :
2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes
Norm
ÖNORM EN ISO 21003-3
Issue date :
2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings (ISO 21003-3:2008 + Amd.1:2021) (consolidated version)
Norm
ÖNORM EN ISO 21003-5
Issue date :
2022 05 15
Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system
Norm
ISO 18553:2002
Issue date :
2002 03 28
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds