STANDARD

Current

ÖNORM EN ISO 3691-1

Issue date: 2020 11 15

Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor.1:2013 + Amd.1:2020) (consolidated version)

This part of ISO 3691 gives safety requirements and the means for their verification for the following types of self-propelled industrial trucks (hereafter referred to as trucks), as defined in ISO 5053: a) industrial counterbalanced trucks; b) reach trucks with retractable mast or retractable fork arm carriage; c) straddle trucks; d) pallet-stacking trucks; e) high-lift platform trucks; f) trucks with elevating operator position up to 1 200 mm; g) side-loading trucks (one side only); h) lateral-stacking trucks (both sides), and lateral- and front-stacking trucks; i) pallet trucks; j) bidirectional and multidirectional trucks; k) tractors with a drawbar pull up to and including 20 000 N; l) rough-terrain counterbalanced trucks; m) industrial trucks powered by battery, diesel, gasoline or LPG (liquefied petroleum gas). This part of ISO 3691 is not applicable to self-propelled variable-reach trucks, driverless trucks or burden carriers, which are covered in ISO 3691-2, ISO 3691-4 and ISO 3691-6, respectively. It is not applicable to industrial trucks operating in severe conditions (e.g. extreme climates, freezer applications, hazardous environments), where special precautions can be necessary. Regional requirements, additional to the requirements given in this part of ISO 3691, are addressed in ISO/TS 3691-7 and ISO/TS 3691-8. This part of ISO 3691 deals with all significant hazards, hazardous situations or hazardous events, as listed in Annex B, with the exception of the following, relevant to the applicable machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. It does not establish requirements for hazards that can occur - during construction, - when handling suspended loads that can swing freely, - when using trucks on public roads, - when operating in potentially explosive atmospheres, - when using trucks in very narrow aisles with clearance of less than 500 mm to the racks, - arising from a non-ergonomic body attitude when driving sit-on trucks, load trailing, - during travelling with unladen trucks having a rated capacity of more than 10 000 kg, due to visibility concerns, - due to overload.

General information on ÖNORM EN ISO 3691-1

Format
Paper | 66 Pages
Language
German | English | Download GER/ENG
Publisher
Austrian Standards International

Timeline

An overview of the development of ÖNORM EN ISO 3691-1 from 1977 til today.

Frequently Asked Questions about ÖNORM EN ISO 3691-1

When you purchase a standard from the Austrian Standards webshop (e.g. ÖNORM, ISO), a single-user licence is included as standard. This entitles a single person to use the standard. A multi-user licence is required if several employees need access. It enables company-wide, legally compliant use and sharing of standards.

Find out more about the benefits of multi-user licences

Standardization thrives on expertise and participation. Anyone interested can play an active role in its further development – for example, by joining the relevant committee or a working group. In this way, you can help shape the content and contribute to advancing the state of the art.

Find out more about getting involved in standardization

If you have an extensive portfolio of standards, we recommend using a professional standards management tool. With effects 2.0, you can manage your standards centrally and efficiently. You can optimise your procurement processes and benefit from an integrated information and subscription service. This ensures you are always up to date and never miss any relevant developments.

Find out more about the benefits of effects 2.0

Normative References

Here you will find an extract of the normative references. Please refer to the document itself for the full list.

Dokumentnummer Titel Ausgabedatum Art Link
Dokumentnummer
IEC 60695-11-10
Titel
Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods
Ausgabedatum
1999 03 31
Art
Standard
Dokumentnummer
ISO 12100:2010
Titel
Safety of machinery — General principles for design — Risk assessment and risk reduction
Ausgabedatum
2010 10 20
Art
Standard
Dokumentnummer
ISO 13284:2003
Titel
Fork-lift trucks — Fork-arm extensions and telescopic fork arms — Technical characteristics and strength requirements
Ausgabedatum
2003 02 03
Art
Standard
Dokumentnummer
ISO 13564-1:2012
Titel
Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity
Ausgabedatum
2012 09 13
Art
Standard
Dokumentnummer
ISO 13849-1:2006
Titel
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
Ausgabedatum
2006 10 30
Art
Standard
Dokumentnummer
ISO 13850:2006
Titel
Safety of machinery — Emergency stop — Principles for design
Ausgabedatum
2006 11 10
Art
Standard
Dokumentnummer
ISO 20898:2008
Titel
Industrial trucks — Electrical requirements
Ausgabedatum
2008 11 05
Art
Standard
Dokumentnummer
ISO 21281:2005
Titel
Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks — Rules for the construction and layout of pedals
Ausgabedatum
2005 02 21
Art
Standard
Dokumentnummer
ISO 22915-10:2008
Titel
Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices
Ausgabedatum
2008 06 10
Art
Standard
Dokumentnummer
ISO 22915-11:2011
Titel
Industrial trucks — Verification of stability — Part 11: Industrial variable-reach trucks
Ausgabedatum
2011 10 28
Art
Standard
Dokumentnummer
ISO 22915-1:2008
Titel
Industrial trucks — Verification of stability — Part 1: General
Ausgabedatum
2008 10 13
Art
Standard
Dokumentnummer
ISO 22915-20:2008
Titel
Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization
Ausgabedatum
2008 06 10
Art
Standard
Dokumentnummer
ISO 22915-21:2009
Titel
Industrial trucks — Verification of stability — Part 21: Order-picking trucks with operator position elevating above 1 200 mm
Ausgabedatum
2009 08 04
Art
Standard
Dokumentnummer
ISO 22915-2:2008
Titel
Industrial trucks — Verification of stability — Part 2: Counterbalanced trucks with mast
Ausgabedatum
2008 09 01
Art
Standard
Dokumentnummer
ISO 22915-3:2008
Titel
Industrial trucks — Verification of stability — Part 3: Reach and straddle trucks
Ausgabedatum
2008 09 02
Art
Standard
Dokumentnummer
ISO 22915-4:2009
Titel
Industrial trucks — Verification of stability — Part 4: Pallet stackers, double stackers and order-picking trucks with operator position elevating up to and including 1 200 mm lift height
Ausgabedatum
2009 11 24
Art
Standard
Dokumentnummer
ISO 22915-7:2009
Titel
Industrial trucks — Verification of stability — Part 7: Bidirectional and multidirectional trucks
Ausgabedatum
2009 08 06
Art
Standard
Dokumentnummer
ISO 22915-8:2008
Titel
Industrial trucks — Verification of stability — Part 8: Additional stability test for trucks operating in the special condition of stacking with mast tilted forward and load elevated
Ausgabedatum
2008 06 10
Art
Standard
Dokumentnummer
ISO 2328:2007
Titel
Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions
Ausgabedatum
2007 05 16
Art
Standard
Dokumentnummer
ISO 2330:2002
Titel
Fork-lift trucks — Fork arms — Technical characteristics and testing
Ausgabedatum
2002 06 06
Art
Standard
Dokumentnummer
ISO 24134:2006
Titel
Industrial trucks — Additional requirements for automated functions on trucks
Ausgabedatum
2006 01 19
Art
Standard
Dokumentnummer
ISO 24135-1:2006
Titel
Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts
Ausgabedatum
2006 10 19
Art
Standard
Dokumentnummer
ISO 2867:2006
Titel
Earth-moving machinery — Access systems
Ausgabedatum
2006 06 28
Art
Standard
Dokumentnummer
ISO 3287:1999
Titel
Powered industrial trucks — Symbols for operator controls and other displays
Ausgabedatum
1999 12 16
Art
Standard
Dokumentnummer
ISO 3411:2007
Titel
Earth-moving machinery — Physical dimensions of operators and minimum operator space envelope
Ausgabedatum
2007 07 09
Art
Standard
Dokumentnummer
ISO 3691-3:2016
Titel
Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads
Ausgabedatum
2016 11 30
Art
Standard
Dokumentnummer
ISO 3691-5:2014
Titel
Industrial trucks — Safety requirements and verification — Part 5: Pedestrian-propelled trucks
Ausgabedatum
2014 02 10
Art
Standard
Dokumentnummer
ISO 3795:1989
Titel
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
Ausgabedatum
1989 10 19
Art
Standard
Dokumentnummer
ISO 5053:1987
Titel
Powered industrial trucks — Terminology
Ausgabedatum
1987 10 29
Art
Standard
Dokumentnummer
ISO 6055:2004
Titel
Industrial trucks — Overhead guards — Specification and testing
Ausgabedatum
2004 09 08
Art
Standard
Dokumentnummer
ISO 6292:2008
Titel
Powered industrial trucks and tractors — Brake performance and component strength
Ausgabedatum
2008 10 23
Art
Standard

Recently Viewed

ÖNORM EN 16228-3

Drilling and foundation equipment - Safety - Part 3: Horizontal directional drilling equipment (HDD)

ÖVE/ÖNORM EN 61953

Diagnostic X-ray imaging equipment - Characteristics of mammographic anti-scatter grids (IEC 61953:1997)

ÖNORM EN 17038-1

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 1: General requirements and procedures for testing and calculation of Energy Efficiency Index (EEI) (consolidated version)
€259.91
excl. USt.
€285.90
incl. 10% USt.
Standard
ÖNORM EN ISO 3691-1 - Industrial trucks - Safety requirements and verification - Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks (ISO 3691-1:2011, including Cor.1:2013 + Amd.1:2020) (consolidated version)

Customize and purchase single-user license

€259.91
excl. USt.
€285.90
incl. 10% USt.
Free delivery

Subscribe to standards

Your shopping cart is empty

Regarding the newly released ISO 9001, we recommend:

Standard
ÖNORM EN ISO 9001 - Quality management systems - Requirements (ISO 9001:2026)
View details
Seminar [Live-Online]
€749.00
excl. USt.
€898.80
incl. 20% USt.
View details
Seminar [Hybrid]
€675.00
excl. USt.
€810.00
incl. 20% USt.
View details
€49.00
excl. USt.
€58.80
incl. 20% USt.
View details
€2,419.00
excl. USt.
€2,902.80
incl. 20% USt.
View details