Content demo

Content demo

Content demo

Content demo

Content demo

Content demo

Content demo

Content demo

Content demo

Content demo

STANDARD

Current

ÖNORM EN ISO 19069-2

Issue date: 2025 03 01

Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19069-2:2024)

This document specifies the methods of preparation of test specimens and the test methods for determining the properties of polypropylene (PP) moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing. This document specifies procedures and conditions for the preparation of test specimens, and procedures for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and essential to characterize PP moulding and extrusion materials are listed. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to PP moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19069-1.

read more

General information on ÖNORM EN ISO 19069-2

Format

Digital | 19 Pages

Language

German | English | Download GER/ENG

Publisher

Austrian Standards International

Committee 074 Plastics and Elastomers

Timeline

An overview of the development of ÖNORM EN ISO 19069-2 from 1997 til today.

• ÖNORM EN ISO 19069-2

  2025 03 01 Standard ÖNORM EN ISO 19069-2, Edition: 2025 03 01

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 19069-2

  2020 06 15 Standard ÖNORM EN ISO 19069-2, Edition: 2020 06 15

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 19069-2

  2016 10 15 Standard ÖNORM EN ISO 19069-2, Edition: 2016 10 15

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 19069-2

  2016 06 01 Standard ÖNORM EN ISO 19069-2, Edition: 2016 06 01

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 1873-2

  2007 12 01 Standard ÖNORM EN ISO 1873-2, Edition: 2007 12 01

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 1873-2/A1

  2000 10 01 Standard ÖNORM EN ISO 1873-2/A1, Edition: 2000 10 01

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...
• ÖNORM EN ISO 1873-2

  1997 06 01 Standard ÖNORM EN ISO 1873-2, Edition: 1997 06 01

  Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specime...

Read more

Frequently Asked Questions about ÖNORM EN ISO 19069-2

What is a "Single-User Licence"?

When you purchase a standard from the Austrian Standards webshop (e.g. ÖNORM, ISO), a single-user licence is included as standard. This entitles a single person to use the standard. A multi-user licence is required if several employees need access. It enables company-wide, legally compliant use and sharing of standards.

Find out more about the benefits of multi-user licences

How can I get involved in the further development of this standard?

Standardization thrives on expertise and participation. Anyone interested can play an active role in its further development – for example, by joining the relevant committee or a working group. In this way, you can help shape the content and contribute to advancing the state of the art.

Find out more about getting involved in standardization

How can I manage my standards efficiently?

If you have an extensive portfolio of standards, we recommend using a professional standards management tool. With effects 2.0, you can manage your standards centrally and efficiently. You can optimise your procurement processes and benefit from an integrated information and subscription service. This ensures you are always up to date and never miss any relevant developments.

Find out more about the benefits of effects 2.0

Normative References

Here you will find an extract of the normative references. Please refer to the document itself for the full list.

Dokumentnummer	Titel	Ausgabedatum	Art	Link
Dokumentnummer ASTM D 5420	Titel Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)	Ausgabedatum 2021 01 15	Art Standard	Zur Produktseite
Dokumentnummer IEC 60695-11-10	Titel Fire hazard testing Test flames -- 50 W horizontal and vertical flame test methods	Ausgabedatum 1999 03 31	Art Standard	Zur Produktseite
Dokumentnummer ISO 10350-1:2017	Titel Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials	Ausgabedatum 2017 10 11	Art Standard	Zur Produktseite
Dokumentnummer ISO 10350-2:2020	Titel Plastics — Acquisition and presentation of comparable single-point data — Part 2: Long-fibre-reinforced plastics	Ausgabedatum 2020 07 22	Art Standard	Zur Produktseite
Dokumentnummer ISO 1133-1:2011	Titel Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method	Ausgabedatum 2011 11 28	Art Standard	Zur Produktseite
Dokumentnummer ISO 11359-2:1999	Titel Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature	Ausgabedatum 1999 10 07	Art Standard	Zur Produktseite
Dokumentnummer ISO 1183-1:2019	Titel Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)	Ausgabedatum 2019 02 28	Art Standard	Zur Produktseite
Dokumentnummer ISO 1183-2:2019	Titel Plastics — Methods for determining the density of non-cellular plastics — Part 2: Density gradient column method	Ausgabedatum 2019 02 28	Art Standard	Zur Produktseite
Dokumentnummer ISO 1183-3:1999	Titel Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method	Ausgabedatum 1999 09 30	Art Standard	Zur Produktseite
Dokumentnummer ISO 16152:2005	Titel Plastics — Determination of xylene-soluble matter in polypropylene	Ausgabedatum 2005 07 11	Art Standard	Zur Produktseite
Dokumentnummer ISO 1628-3:2010	Titel Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscometers — Part 3: Polyethylenes and polypropylenes	Ausgabedatum 2010 04 15	Art Standard	Zur Produktseite
Dokumentnummer ISO 178:2019	Titel Plastics — Determination of flexural properties	Ausgabedatum 2019 04 01	Art Standard	Zur Produktseite
Dokumentnummer ISO 179-1:2010	Titel Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test	Ausgabedatum 2010 06 04	Art Standard	Zur Produktseite
Dokumentnummer ISO 179-2:2020	Titel Plastics — Determination of Charpy impact properties — Part 2: Instrumented impact test	Ausgabedatum 2020 05 14	Art Standard	Zur Produktseite
Dokumentnummer ISO 20753:2018	Titel Plastics — Test specimens	Ausgabedatum 2018 10 19	Art Standard	Zur Produktseite
Dokumentnummer ISO 2818:2018	Titel Plastics — Preparation of test specimens by machining	Ausgabedatum 2018 12 13	Art Standard	Zur Produktseite
Dokumentnummer ISO 293:2004	Titel Plastics — Compression moulding of test specimens of thermoplastic materials	Ausgabedatum 2004 05 11	Art Standard	Zur Produktseite
Dokumentnummer ISO 294-1:2017	Titel Plastics — Injection moulding of test specimens of thermoplastic materials — Part 1: General principles, and moulding of multipurpose and bar test specimens	Ausgabedatum 2017 05 10	Art Standard	Zur Produktseite
Dokumentnummer ISO 294-3:2020	Titel Plastics — Injection moulding of test specimens of thermoplastic materials — Part 3: Small plates	Ausgabedatum 2020 06 26	Art Standard	Zur Produktseite
Dokumentnummer ISO 294-4:2018	Titel Plastics — Injection moulding of test specimens of thermoplastic materials — Part 4: Determination of moulding shrinkage	Ausgabedatum 2018 12 20	Art Standard	Zur Produktseite
Dokumentnummer ISO 4577:2019	Titel Plastics — Polypropylene and propylene-copolymers — Determination of thermal oxidative stability in air — Oven method	Ausgabedatum 2019 07 17	Art Standard	Zur Produktseite
Dokumentnummer ISO 4589-2:2017	Titel Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test	Ausgabedatum 2017 04 12	Art Standard	Zur Produktseite
Dokumentnummer ISO 527-2:2012	Titel Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics	Ausgabedatum 2012 02 22	Art Standard	Zur Produktseite
Dokumentnummer ISO 62:2008	Titel Plastics — Determination of water absorption	Ausgabedatum 2008 02 01	Art Standard	Zur Produktseite
Dokumentnummer ISO 6603-2:2000	Titel Plastics — Determination of puncture impact behaviour of rigid plastics — Part 2: Instrumented impact testing	Ausgabedatum 2000 09 21	Art Standard	Zur Produktseite
Dokumentnummer ISO 75-2:2013	Titel Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite	Ausgabedatum 2013 04 09	Art Standard	Zur Produktseite
Dokumentnummer ISO 8256:2004	Titel Plastics — Determination of tensile-impact strength	Ausgabedatum 2004 07 02	Art Standard	Zur Produktseite
Dokumentnummer ISO 899-1:2017	Titel Plastics — Determination of creep behaviour — Part 1: Tensile creep	Ausgabedatum 2017 10 02	Art Standard	Zur Produktseite

load more

Recently Viewed

ÖNORM EN ISO 15011-1

Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis (ISO 15011-1:2009)

ÖNORM EN 16272-3-1

Railway applications - Infrastructure - Noise barriers and related devices acting on airborne sound propagation - Test method for determining the acoustic performance - Part 3-1: Normalized railway noise spectrum and single number ratings for diffuse sound field applications

ÖNORM EN ISO 13606-1

Health informatics - Electronic health record communication - Part 1: Reference model (ISO 13606-1:2019)