STANDARD

Current

ÖNORM EN ISO 1452-3

Issue date: 2020 03 01

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings

This part of ISO 1452 specifies the characteristics of fittings made from unplasticized poly(vinyl chloride) (PVC-U) for piping systems intended for water supply and for buried and above-ground drainage and sewerage under pressure. It also specifies the test parameters for the test methods referred to in this part of ISO 1452. In conjunction with ISO 1452-1, ISO 1452-2 and ISO 1452-5, it is applicable to PVC-U fittings and to joints with components of PVC-U, other plastics and non-plastics materials intended to be used for the following: a) water mains and services buried in the ground; b) conveyance of water above ground for both outside and inside buildings; c) buried and above-ground drainage and sewerage under pressure. It is applicable to fittings in piping systems intended for the supply of water under pressure up to and including 25 °C (cold water), intended for human consumption and for general purposes as well as for waste water under pressure. This part of ISO 1452 is also applicable to components for the conveyance of water and waste water up to and including 45 °C. For temperatures between 25 °C and 45 °C, Figure A.1 of ISO 1452-2:2009 applies.

General information on ÖNORM EN ISO 1452-3

Format

Paper | 62 Pages

Language

German | English | Download GER/ENG

Publisher

Austrian Standards International

Committee 005 Thermoplastics piping system for the transport of fluids and gases

Timeline

An overview of the development of ÖNORM EN ISO 1452-3 from 2000 til today.

ÖNORM EN ISO 1452-3

2020 03 01 Standard ÖNORM EN ISO 1452-3, Edition: 2020 03 01

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under...
ÖNORM EN ISO 1452-3

2010 10 15 Standard ÖNORM EN ISO 1452-3, Edition: 2010 10 15

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under...
ÖNORM EN 1456-1

2002 08 01 Standard ÖNORM EN 1456-1, Edition: 2002 08 01

Plastics piping systems for buried and above-ground drainage and sewerage under pressure - Unplastic...
ÖNORM EN 1452-3

2000 02 01 Standard ÖNORM EN 1452-3, Edition: 2000 02 01

Plastics piping systems for water supply - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fitt...

Frequently Asked Questions about ÖNORM EN ISO 1452-3

What is a "Single-User Licence"?

When you purchase a standard from the Austrian Standards webshop (e.g. ÖNORM, ISO), a single-user licence is included as standard. This entitles a single person to use the standard. A multi-user licence is required if several employees need access. It enables company-wide, legally compliant use and sharing of standards.

Find out more about the benefits of multi-user licences

How can I get involved in the further development of this standard?

Standardization thrives on expertise and participation. Anyone interested can play an active role in its further development – for example, by joining the relevant committee or a working group. In this way, you can help shape the content and contribute to advancing the state of the art.

Find out more about getting involved in standardization

How can I manage my standards efficiently?

If you have an extensive portfolio of standards, we recommend using a professional standards management tool. With effects 2.0, you can manage your standards centrally and efficiently. You can optimise your procurement processes and benefit from an integrated information and subscription service. This ensures you are always up to date and never miss any relevant developments.

Find out more about the benefits of effects 2.0

Normative References

Here you will find an extract of the normative references. Please refer to the document itself for the full list.

Dokumentnummer	Titel	Ausgabedatum	Art	Link
Dokumentnummer ISO 1167-1:2006	Titel Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method	Ausgabedatum 2006 01 30	Art Standard	Zur Produktseite
Dokumentnummer ISO 1167-3:2007	Titel Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components	Ausgabedatum 2007 10 30	Art Standard	Zur Produktseite
Dokumentnummer ISO 1183-1:2004	Titel Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method	Ausgabedatum 2004 01 19	Art Standard	Zur Produktseite
Dokumentnummer ISO 13783:1997	Titel Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure	Ausgabedatum 1997 08 28	Art Standard	Zur Produktseite
Dokumentnummer ISO 1452-1:2009	Titel Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 1: General	Ausgabedatum 2009 12 01	Art Standard	Zur Produktseite
Dokumentnummer ISO 1452-2:2009	Titel Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 2: Pipes	Ausgabedatum 2009 12 01	Art Standard	Zur Produktseite
Dokumentnummer ISO 1452-5:2009	Titel Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure — Unplasticized poly(vinyl chloride) (PVC-U) — Part 5: Fitness for purpose of the system (Corrected version 2009-12)	Ausgabedatum 2009 12 01	Art Standard	Zur Produktseite
Dokumentnummer ISO 2507-1:1995	Titel Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method	Ausgabedatum 1995 02 02	Art Standard	Zur Produktseite
Dokumentnummer ISO 2507-2:1995	Titel Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes	Ausgabedatum 1995 02 02	Art Standard	Zur Produktseite
Dokumentnummer ISO 3126:2005	Titel Plastics piping systems — Plastics components — Determination of dimensions	Ausgabedatum 2005 03 16	Art Standard	Zur Produktseite
Dokumentnummer ISO 580:2005	Titel Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating	Ausgabedatum 2005 03 07	Art Standard	Zur Produktseite
Dokumentnummer ISO 7-1:1994	Titel Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation	Ausgabedatum 1994 05 12	Art Standard	Zur Produktseite
Dokumentnummer ISO 7686:2005	Titel Plastics pipes and fittings — Determination of opacity	Ausgabedatum 2005 06 30	Art Standard	Zur Produktseite

ÖNORM EN ISO 1452-3

General information on ÖNORM EN ISO 1452-3

Timeline

Frequently Asked Questions about ÖNORM EN ISO 1452-3

Normative References

Recently Viewed

ÖNORM CEN/TS 13130-27

ÖNORM EN 13126-6

ÖNORM EN 3155-002

Customize and purchase single-user license

Regarding the newly released ISO 9001, we recommend:

ÖNORM EN ISO 1452-3

General information on ÖNORM EN ISO 1452-3

Timeline

Frequently Asked Questions about ÖNORM EN ISO 1452-3

Normative References

Recently Viewed

ÖNORM CEN/TS 13130-27

ÖNORM EN 13126-6

ÖNORM EN 3155-002

Customize and purchase single-user license

Subscribe to standards

Regarding the newly released ISO 9001, we recommend: