Please select and order
€98.22
excl. VAT
CONFIGURE NOW
Norm

ÖNORM EN 14035-24

Issue date: 2004 11 01

Fireworks - Part 24: Novelty matches - Specification and test methods

This document specifies requirements for the construction, performance, primary packaging and labelling of novelty matches and the corresponding test methods. It is appl...
Read more
Withdrawn : 2010 11 01
This document specifies requirements for the construction, performance, primary packaging and labelling of novelty matches and the corresponding test methods. It is applicable to fireworks which are classified as novelty match in category 1 in EN 14035-2 and which are contained in a primary pack. It is applicable to novelty matches which contain pyrotechnic report composition that is silver fulminate only. It is not applicable to novelty matches containing pyrotechnic composition that includes any of the following substances: arsenic or arsenic compounds; mixtures containing a mass fraction of chlorates greater than 80 %; mixtures of chlorates with metals; mixtures of chlorates with red phosphorus; mixtures of chlorates with potassium hexacyanoferrate(II); mixtures of chlorates with sulfur; mixtures of chlorates with sulfides; lead or lead compounds; mercury compounds; white phosphorus; picrates or picric acid; potassium chlorate with a mass fraction of bromates greater than 0,15 %; sulfur with an acidity, expressed in mass fraction of sulphuric acid, greater than 0,002 %; zirconium with a particle size of less than 40 m. NOTE In EN 14035-2, novelty matches are classified as follows: brief description: match with a dot of pyrotechnic composition, designed to be held in the hand; principal effects: report and/or visual effect. Schemes for type testing of novelty matches and batch testing of novelty matches are specified in annex A and annex B respectively.
ÖNORM EN 15947-5
2023 01 15
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 5: Requirements for construction a...
Norm
ÖNORM EN 15947-4
2023 01 15
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
Norm
ÖNORM EN 15947-3
2023 01 15
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 3: Minimum labelling requirements
Norm
ÖNORM EN 15947-4
2016 02 01
Pyrotechnic articles - Fireworks, Categories F1, F2 and F3 - Part 4: Test methods
Norm
ÖNORM EN 15947-3
2016 02 01
Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 3: Minimum labelling requirements...
Norm
ÖNORM EN 15947-5
2016 02 01
Pyrotechnic articles - Fireworks, Categories F1, F2, and F3 - Part 5: Requirements for construction ...
Norm
ÖNORM EN 15947-3
2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 3: Minimum labelling requirements
Norm
ÖNORM EN 15947-4
2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 4: Test methods
Norm
ÖNORM EN 15947-5
2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 5: Requirements for construction and...
Norm
ÖNORM EN 14035-24
2004 11 01
Fireworks - Part 24: Novelty matches - Specification and test methods
Norm
Historie aufklappen
Norm
ISO 2859-1:1999
Issue date : 1999 11 18
Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Norm
ISO 3599:1976
Issue date : 1976 06 01
Vernier callipers reading to 0,1 and 0,05 mm
Norm
ISO 4793:1980
Issue date : 1980 10 01
Laboratory sintered (fritted) filters — Porosity grading, classification and designation
Norm
ISO 6344-3:1998
Issue date : 1998 05 28
Coated abrasives — Grain size analysis — Part 3: Determination of grain size distribution of microgrits P240 to P2500
Norm
ISO 21948:2001
Issue date : 2001 03 29
Coated abrasives — Plain sheets
Norm
ÖNORM EN 20187
Issue date : 1994 03 01
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:1990)
Norm
ÖNORM EN ISO 845
Issue date : 2009 08 15
Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)
Norm
ÖNORM EN ISO 536
Issue date : 1996 09 01
Paper and board - Determination of grammage (ISO 536:1995)
Norm
ÖNORM EN ISO 868
Issue date : 2003 09 01
Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
Norm
ÖNORM EN ISO 2439
Issue date : 2009 04 01
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008)
Norm
ISO 3599:1976
Issue date : 1976 06 01
Vernier callipers reading to 0,1 and 0,05 mm
Norm
ISO 4793:1980
Issue date : 1980 10 01
Laboratory sintered (fritted) filters — Porosity grading, classification and designation
Norm
ISO 6344-3:2013
Issue date : 2013 05 08
Coated abrasives — Grain size analysis — Part 3: Determination of grain size distribution of microgrits P240 to P2500
Norm
ISO 21948:2001
Issue date : 2001 03 29
Coated abrasives — Plain sheets
Norm
ÖNORM EN 15947-4
Issue date : 2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 4: Test methods
Norm
ÖNORM EN 15947-5
Issue date : 2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 5: Requirements for construction and performance
Norm
ÖNORM EN 15947-3
Issue date : 2010 11 01
Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 3: Minimum labelling requirements