Please select and order
€72.72
excl. VAT
Add to cart
Norm

ÖNORM B 3031

Issue date: 2007 11 01

Wood plastic composites - Material characteristics and general test methods

Diese ÖNORM dient der Charakterisierung der Grundstoffe, Additive, Formmassen und der Materialeigen-schaften der Holz-Kunststoff-Verbundwerkstoffe im Zuge verschiedener P...
Valid
Diese ÖNORM dient der Charakterisierung der Grundstoffe, Additive, Formmassen und der Materialeigen-schaften der Holz-Kunststoff-Verbundwerkstoffe im Zuge verschiedener Prozessvarianten gemäß ÖNORM B 3030 zur Herstellung von Produkten aus Holz-Kunststoff-Verbundwerkstoffe (Wood Plastic Composites; WPC). Weiters legt diese ÖNORM die Bedingungen zur Herstellung von Probekörpern und die zur Bestimmung der Materialeigenschaften von Holz-Kunststoff-Verbundwerkstoffen anzuwendenden Prüfverfahren fest. Anforderungen an die Behandlung und an die Konditionierung des Probenmaterials vor der Herstellung der Probekörper sowie der Konditionierung der Probekörper vor der Prüfung sind ebenfalls enthalten. Weiters werden Verfahren für die Herstellung der Probekörper sowie Vorschriften für die Bestimmung der Eigenschaften der Formmassen, aus denen die Probekörper hergestellt sind, angegeben. Eigenschaften und Prüfmethoden, die notwendig sind, um Holz-Kunststoff-Verbundwerkstoffe, deren Form-massen sowie der Grundstoffe und Additive zu charakterisieren, sind aufgelistet.
ÖNORM B 3031
2007 11 01
Wood plastic composites - Material characteristics and general test methods
Norm
Norm
ÖNORM EN 326-2
Issue date : 2006 10 01
Wood-based panels - Sampling, cutting and inspection - Part 2: Quality control in the factory (consolidated version)
Norm
ÖNORM EN 326-2
Issue date : 2008 07 01
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
Norm
ÖNORM EN 326-3
Issue date : 2004 02 01
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
Norm
ÖNORM EN ISO 10350-1
Issue date : 2001 02 01
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:1998)
Norm
ÖNORM EN ISO 10350-1
Issue date : 2008 05 15
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2007)
Norm
ÖNORM EN ISO 10350-2
Issue date : 2001 11 01
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2001)
Norm
ÖNORM EN ISO 10350-2
Issue date : 2007 07 01
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO/DIS 10350-2:2007)
Norm
ÖNORM EN ISO 10724-1
Issue date : 2002 04 01
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of mulitpurpose test specimens (ISO 10724-1:1998)
Norm
ÖNORM EN ISO 10724-2
Issue date : 2001 02 01
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998)
Norm
ÖNORM EN ISO 1133
Issue date : 2005 10 01
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
Norm
ÖNORM EN ISO 1163-1
Issue date : 1999 10 01
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)
Norm
ÖNORM EN ISO 1163-2
Issue date : 1999 10 01
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
Norm
ÖNORM EN ISO 1183-1
Issue date : 2004 05 01
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004)
Norm
ÖNORM EN ISO 1183-2
Issue date : 2004 10 01
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2004)
Norm
ÖNORM EN ISO 1183-3
Issue date : 2000 02 01
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
Norm
ÖNORM EN ISO 14125
Issue date : 2003 09 01
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor.1:2001)
Norm
ÖNORM EN ISO 179-1
Issue date : 2005 11 01
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd 1:2005) (consolidated version)
Norm
ÖNORM EN ISO 179-1
Issue date : 2008 12 01
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO/DIS 179-1:2008)
Norm
ÖNORM EN ISO 179-2
Issue date : 2000 01 01
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997)
Norm
ÖNORM EN ISO 1872-1
Issue date : 1999 10 01
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)
Norm
ÖNORM EN ISO 1872-2
Issue date : 2007 06 01
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
Norm
ÖNORM EN ISO 1873-1
Issue date : 1996 05 01
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)
Norm
ÖNORM EN ISO 1873-2
Issue date : 2007 12 01
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
Norm
ÖNORM EN ISO 2580-1
Issue date : 2003 03 01
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)
Norm
ÖNORM EN ISO 2580-2
Issue date : 2004 05 01
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
Norm
ÖNORM EN ISO 2818
Issue date : 1997 03 01
Plastics - Preparation of test specimens by machining (ISO 2818:1994)
Norm
ÖNORM EN ISO 291
Issue date : 2008 07 01
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Norm
ÖNORM EN ISO 293
Issue date : 2005 10 01
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2004)
Norm
ÖNORM EN ISO 294-1
Issue date : 1998 10 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996)
Norm
ÖNORM EN ISO 294-1/A1
Issue date : 2002 06 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001) (Amendment)
Norm
ÖNORM EN ISO 294-2
Issue date : 2005 12 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:1996 + Amd 1:2004) (consolidated version)
Norm
ÖNORM EN ISO 294-3
Issue date : 2003 12 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2002)
Norm
ÖNORM EN ISO 295
Issue date : 2004 05 01
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
Norm
ÖNORM EN ISO 3167
Issue date : 2003 12 01
Plastics - Multipurpose test specimens (ISO 3167:2002)
Norm
ÖNORM EN ISO 4589-1
Issue date : 1999 09 01
Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance (ISO 4589-1:1996)
Norm
ÖNORM EN ISO 4589-2
Issue date : 2006 09 01
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005) (consolidated version)
Norm
ÖNORM EN ISO 4589-3
Issue date : 1996 11 01
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:1996)
Norm
ÖNORM EN ISO 527-1
Issue date : 1996 05 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1: 1994)
Norm
ÖNORM EN ISO 527-4
Issue date : 1997 09 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:1997)
Norm
ÖNORM EN ISO 60
Issue date : 1999 12 01
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)
Norm
ÖNORM EN ISO 75-1
Issue date : 2004 09 01
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2004)
Norm
ÖNORM EN ISO 75-2
Issue date : 2006 09 01
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004) (consolidated version)
Norm
ÖNORM EN ISO 899-1
Issue date : 2003 10 01
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003)
Norm
ÖNORM EN ISO 899-2
Issue date : 2003 10 01
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2003)
Norm
ÖNORM S 2100
Issue date : 2005 10 01
List of wastes
Norm
ÖNORM S 2100
Issue date : 2007 09 01
List of wastes
Norm
DIN 66165-1
Issue date : 1987 04
Particle size analysis; sieve analysis; general principles
Norm
DIN 66165-2
Issue date : 1987 04
Particle size analysis; sieve analysis; procedure
Norm
ISO 11357-2:1999
Issue date : 1999 03 25
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature
Norm
ISO 11357-3:1999
Issue date : 1999 03 25
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11357-3:1999/Amd 1:2005
Issue date : 2005 07 06
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
Norm
ISO 11443:2005
Issue date : 2005 03 02
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
Norm
ÖNORM A 5561
Issue date : 2001 11 01
Determination of settled and compacted apparent densities of powders and granulated materials
Norm
ÖNORM B 3030
Issue date : 2005 12 01
Wood plastic composites - Terminology and classification
Norm
ÖNORM EN 15345
Issue date : 2008 08 01
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
Norm
ÖNORM EN 317
Issue date : 2005 12 01
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
Norm
ÖNORM EN 322
Issue date : 2005 12 01
Wood-based panels - Determination of moisture content
Norm
ÖNORM EN 326-1
Issue date : 2005 12 01
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
Norm
ÖNORM A 5561
Issue date : 2001 11 01
Determination of settled and compacted apparent densities of powders and granulated materials
Norm
ÖNORM B 3030
Issue date : 2005 12 01
Wood plastic composites - Terminology and classification
Norm
ÖNORM EN 317
Issue date : 2005 12 01
Particleboards and fibreboards - Determination of swelling in thickness after immersion in water
Norm
ÖNORM EN 322
Issue date : 2005 12 01
Wood-based panels - Determination of moisture content
Norm
ÖNORM EN 326-1
Issue date : 2005 12 01
Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results
Norm
ÖNORM EN 326-2
Issue date : 2014 09 15
Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control
Norm
ÖNORM EN 326-3
Issue date : 2004 02 01
Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels
Norm
ÖNORM EN 15345
Issue date : 2008 08 01
Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates
Norm
ÖNORM EN ISO 60
Issue date : 2023 12 01
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023)
Norm
ÖNORM EN ISO 75-1
Issue date : 2020 05 15
Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2020)
Norm
ÖNORM EN ISO 75-2
Issue date : 2013 07 15
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
Norm
ÖNORM EN ISO 179-1
Issue date : 2023 10 15
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2023)
Norm
ÖNORM EN ISO 179-2
Issue date : 2020 08 15
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
Norm
ÖNORM EN ISO 291
Issue date : 2008 07 01
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Norm
ÖNORM EN ISO 293
Issue date : 2023 07 01
Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023)
Norm
ÖNORM EN ISO 294-1
Issue date : 2017 08 15
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017)
Norm
ÖNORM EN ISO 294-1/A1
Issue date : 2002 06 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:1996/Amd. 1:2001) (Amendment)
Norm
ÖNORM EN ISO 294-2
Issue date : 2019 04 01
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars (ISO 294-2:2018)
Norm
ÖNORM EN ISO 294-3
Issue date : 2020 11 15
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
Norm
ÖNORM EN ISO 295
Issue date : 2004 05 01
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
Norm
ÖNORM EN ISO 527-1
Issue date : 2019 12 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)
Norm
ÖNORM EN ISO 527-4
Issue date : 2023 08 01
Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023)
Norm
ÖNORM EN ISO 899-1
Issue date : 2018 03 01
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2017)
Norm
ÖNORM EN ISO 899-2
Issue date : 2015 06 15
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - (ISO 899-2:2003 + Amd 1:2015) (consolidated version)
Norm
ÖNORM EN ISO 1133
Issue date : 2005 10 01
Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005)
Norm
ÖNORM EN ISO 1163-1
Issue date : 1999 10 01
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1163-1:1995)
Norm
ÖNORM EN ISO 1163-2
Issue date : 1999 10 01
Plastics - Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1163-2:1995)
Norm
ÖNORM EN ISO 1183-1
Issue date : 2019 07 15
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO 1183-1:2019)
Norm
ÖNORM EN ISO 1183-2
Issue date : 2019 07 15
Plastics - Methods for determining the density of non-cellular plastics - Part 2: Density gradient column method (ISO 1183-2:2019)
Norm
ÖNORM EN ISO 1183-3
Issue date : 2000 02 01
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
Norm
ÖNORM EN ISO 1872-1
Issue date : 1999 10 01
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1872-1:1993)
Norm
ÖNORM EN ISO 1872-2
Issue date : 2007 06 01
Plastics - Polyethylene (PE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007)
Norm
ÖNORM EN ISO 1873-1
Issue date : 1996 05 01
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 1873-1:1995)
Norm
ÖNORM EN ISO 1873-2
Issue date : 2007 12 01
Plastics - Polypropylene (PP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1873-2:2007)
Norm
ÖNORM EN ISO 2580-1
Issue date : 2003 03 01
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 2580-1:2002)
Norm
ÖNORM EN ISO 2580-2
Issue date : 2004 05 01
Plastics - Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 2580-2:2003)
Norm
ÖNORM EN ISO 2818
Issue date : 2019 05 15
Plastics - Preparation of test specimens by machining (ISO 2818:2018)
Norm
ÖNORM EN ISO 3167
Issue date : 2014 11 01
Plastics - Multipurpose test specimens (ISO 3167:2014)
Norm
ÖNORM EN ISO 4589-1
Issue date : 2017 07 15
Plastics - Determination of burning behaviour by oxygen index - Part 1: General requirements (ISO 4589-1:2017)
Norm
ÖNORM EN ISO 4589-2
Issue date : 2017 09 15
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:2017)
Norm
ÖNORM EN ISO 4589-3
Issue date : 2017 08 15
Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test (ISO 4589-3:2017)
Norm
ÖNORM EN ISO 10350-1
Issue date : 2018 03 15
Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials (ISO 10350-1:2017)
Norm
ÖNORM EN ISO 10350-2
Issue date : 2020 10 15
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
Norm
ÖNORM EN ISO 10724-1
Issue date : 2002 04 01
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of mulitpurpose test specimens (ISO 10724-1:1998)
Norm
ÖNORM EN ISO 10724-2
Issue date : 2001 02 01
Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates (ISO 10724-2:1998)
Norm
ÖNORM EN ISO 14125
Issue date : 2011 11 01
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) (consolidated version)
Norm
ÖNORM S 2100
Issue date : 2005 10 01
List of wastes
Norm
ISO 11443:2021
Issue date : 2021 02 26
Plastics — Determination of the fluidity of plastics using capillary and slit-die rheometers
Norm
ISO 11357-2:2020
Issue date : 2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 11357-3:2018
Issue date : 2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 11357-3:1999/Amd 1:2005
Issue date : 2005 07 06
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization — Amendment 1
Norm
DIN 66165-1
Issue date : 2022 06
Particle size analysis - Sieving analysis - Part 1: Fundamentals
Norm
DIN 66165-2
Issue date : 2016 08
Particle size analysis - Sieving analysis - Part 2: Procedure