Please select and order
€50.25
excl. VAT
CONFIGURE NOW
Norm
ÖNORM B 2560
Issue date: 2014 12 01
Ductile iron pipes - Finishing paints of polyurethane or epoxy materials - Requirements and tests
This ÖNORM contains requirements and test applied of finishing layer - made during the manufacturing process - of polyurethane ("PU") or epoxy resin ("EP") for pipes made...
Read more
Withdrawn
: 2017 03 01
Publisher:
Austrian Standards International
Format:
Digital | 8 Pages
Language:
German
Currently valid:
Optionally co-design standards:
This ÖNORM contains requirements and test applied of finishing layer - made during the manufacturing process - of polyurethane ("PU") or epoxy resin ("EP") for pipes made of ductile cast iron with factory-applied zinc coating ÖNORM B 2555 according to the ÖNORMEN EN 545, EN 598 and EN 969 This finishing layer is suitable for pipes, which are both above and below the water level installed in the soil with a soil resistance of more than 1500 (ohm x Zentimeter). In differentiated assessment of the soil in accordance with the procedures contained in ÖNORM B 5013-1 tubes with this finishing layer can be used to a rating number of 15.
ÖNORM B 2560
2020 08 01
Ductile iron pipes and fittings - Metallic zinc coating with finishing layer - Requirements and test...
Norm
ÖNORM B 2560
2017 03 01
Ductile iron pipes - Finishing coating of polyurethane, epoxy or acrylic materials - Requirements an...
Norm
ÖNORM B 2560
2014 12 01
Ductile iron pipes - Finishing paints of polyurethane or epoxy materials - Requirements and tests
Norm
↖
ÖNORM B 2560
2004 04 01
Ductile iron pipes - Finishing paints of polyurethane or epoxy materials - Requirements and tests
Norm
ÖNORM B 2560
1995 09 01
Factory made external polyurethane coatings for buried ductile iron pipes - Requirements and tests
Norm
Norm
ÖNORM B 2599-1
Issue date :
2011 09 01
Ductile cast iron pipes and fittings - Part 1: Specifications for joints, surface protection and quality assurance of water pipelines
Norm
ÖNORM B 5013-1
Issue date :
2013 12 15
Corrosion protection by organic coatings for water and wastewater engineering in residential areas - Part 1: Assesment of corrosion probability and protection of unalloyed and low-alloyed ferrous materials
Norm
ÖNORM EN 545
Issue date :
2011 03 15
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 598
Issue date :
2009 12 01
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
Norm
ÖNORM EN 969
Issue date :
2009 09 15
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
Norm
ÖNORM EN ISO 2064
Issue date :
2000 06 01
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
Norm
ÖNORM EN ISO 3882
Issue date :
2003 10 01
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
Norm
ÖNORM B 2599-2
Issue date :
2011 09 01
Ductile cast iron pipes and fittings - Part 2: Specifications for joints, surface protection and quality assurance of waste water pipelines
Norm
ÖNORM B 2599-3
Issue date :
2012 08 01
Ductile cast iron pipes and fittings - Part 3: Specifications for joints, surface protection and quality assurance of gas piplines
Norm
ÖNORM B 5013-3
Issue date :
2015 08 01
Surface protection by organic coatings for water and waste engineering in residential areas - Part 3: Requirements and testing of protective materials
Norm
ÖNORM EN ISO 4624
Issue date :
2003 07 01
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
Norm
ÖNORM EN ISO 4624
Issue date :
2014 06 01
Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2014)
Norm
ÖNORM B 2599-1
Issue date :
2020 08 01
Ductile iron pipes and fittings - Part 1: Use for water pipelines - National amendement to ÖNORM EN 545
Norm
ÖNORM B 5013-1
Issue date :
2013 12 15
Corrosion protection by organic coatings for water and wastewater engineering in residential areas - Part 1: Assesment of corrosion probability and protection of unalloyed and low-alloyed ferrous materials
Norm
ÖNORM EN 545
Issue date :
2011 03 15
Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods
Norm
ÖNORM EN 598
Issue date :
2009 12 01
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods
Norm
ÖNORM EN 969
Issue date :
2009 09 15
Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods
Norm
ÖNORM EN ISO 2064
Issue date :
2000 06 01
Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996)
Norm
ÖNORM EN ISO 3882
Issue date :
2003 10 01
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003)
Norm
ÖNORM EN ISO 4624
Issue date :
2023 09 15
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
Norm
ÖNORM B 2599-2
Issue date :
2020 08 01
Ductile iron pipes and fittings - Part 2: Use for sewerage pipelines - National amendement to ÖNORM EN 598
Norm
ÖNORM B 2599-3
Issue date :
2020 08 01
Ductile iron pipes and fittings - Part 3: Use for industrial water pipelines - National amendement to ÖNORM EN 545
Norm
ÖNORM B 5013-3
Issue date :
2015 08 01
Surface protection by organic coatings for water and waste engineering in residential areas - Part 3: Requirements and testing of protective materials
Norm
ÖNORM B 2560
Issue date :
2017 03 01
Ductile iron pipes - Finishing coating of polyurethane, epoxy or acrylic materials - Requirements and test methods