STANDARD

Withdrawn

ÖNORM EN ISO 80601-2-79

Issue date: 2020 02 15

Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment (ISO 80601-2-79:2018)

IEC 60601-1:2005+AMD1:2012, Clause 1, applies, except as follows: Replacement: This document applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of VENTILATORY SUPPORT EQUIPMENT, as defined in 201.3.205, for VENTILATORY IMPAIRMENT, as defined in 201.3.202, hereafter also referred to as ME EQUIPMENT, in combination with its ACCESSORIES: — intended for use in the HOME HEALTHCARE ENVIRONMENT; — intended for use by a LAY OPERATOR; and — intended for use with PATIENTS who have VENTILATORY IMPAIRMENT, the most fragile of these PATIENTS, would not likely experience injury with the loss of this artificial ventilation; and — not intended for PATIENTS who are dependent on artificial ventilation for their immediate life support. This document is also applicable to those ACCESSORIES intended by their MANUFACTURER to be connected to the BREATHING SYSTEM of VENTILATORY SUPPORT EQUIPMENT for VENTILATORY IMPAIRMENT, where the characteristics of those ACCESSORIES can affect the BASIC SAFETY or ESSENTIAL PERFORMANCE of the VENTILATORY SUPPORT EQUIPMENT for VENTILATORY IMPAIRMENT. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME SYSTEMS only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME EQUIPMENT and to ME SYSTEMS, as relevant. HAZARDS inherent in the intended physiological function of ME EQUIPMENT or ME SYSTEMS within the scope of this document are not covered by specific requirements in this document except in IEC 60601-1:2005+AMD1:2012, 7.2.13 and 8.4.1. This document does not specify the requirements for: — VENTILATORS or ACCESSORIES for VENTILATOR-DEPENDENT PATIENTS intended for critical care applications, which are given in ISO 80601-2-12; — VENTILATORS or ACCESSORIES intended for anaesthetic applications, which are given in ISO 80601-2-13; — VENTILATORS or ACCESSORIES intended for the emergency medical services environment, which are given in ISO 80601-2-84 [5] 4, the future replacement for ISO 10651-3; — VENTILATORS or ACCESSORIES intended for VENTILATOR-DEPENDENT PATIENTS in the HOME HEALTHCARE ENVIRONMENT, which are given in ISO 80601-2-72; — VENTILATORY SUPPORT EQUIPMENT or ACCESSORIES intended for VENTILATORY INSUFFICIENCY, which are given in ISO 80601-2-80; — sleep apnoea therapy ME EQUIPMENT, which are given in ISO 80601-2-70; — continuous positive airway pressure (CPAP) ME EQUIPMENT; — high-frequency jet VENTILATORS (HFJVs); — high-frequency oscillatory VENTILATORS (HFOVs); — oxygen therapy constant flow ME EQUIPMENT; — cuirass or “iron-lung” ventilation equipment. This document is a document in the IEC 60601 and IEC/ISO 80601 series of documents.

General information on ÖNORM EN ISO 80601-2-79

Format
Digital | 92 Pages
Language
German | English | Download GER/ENG
Publisher
Austrian Standards International

Timeline

An overview of the development of ÖNORM EN ISO 80601-2-79 from 2004 til today.

Frequently Asked Questions about ÖNORM EN ISO 80601-2-79

When you purchase a standard from the Austrian Standards webshop (e.g. ÖNORM, ISO), a single-user licence is included as standard. This entitles a single person to use the standard. A multi-user licence is required if several employees need access. It enables company-wide, legally compliant use and sharing of standards.

Find out more about the benefits of multi-user licences

Standardization thrives on expertise and participation. Anyone interested can play an active role in its further development – for example, by joining the relevant committee or a working group. In this way, you can help shape the content and contribute to advancing the state of the art.

Find out more about getting involved in standardization

If you have an extensive portfolio of standards, we recommend using a professional standards management tool. With effects 2.0, you can manage your standards centrally and efficiently. You can optimise your procurement processes and benefit from an integrated information and subscription service. This ensures you are always up to date and never miss any relevant developments.

Find out more about the benefits of effects 2.0

Normative References

Here you will find an extract of the normative references. Please refer to the document itself for the full list.

Dokumentnummer Titel Ausgabedatum Art Link
Dokumentnummer
ISO 15223-1:2016
Titel
Medical devices — Symbols to be used with medical device labels, labelling and information to be supplied — Part 1: General requirements (Corrected version 2017-03)
Ausgabedatum
2016 11 02
Art
Standard
Dokumentnummer
ISO 16142-1:2016
Titel
Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards
Ausgabedatum
2016 03 09
Art
Standard
Dokumentnummer
ISO 17510:2015
Titel
Medical devices — Sleep apnoea breathing therapy — Masks and application accessories
Ausgabedatum
2015 07 23
Art
Standard
Dokumentnummer
ISO 17664:2017
Titel
Processing of health care products — Information to be provided by the medical device manufacturer for the processing of medical devices
Ausgabedatum
2017 10 25
Art
Standard
Dokumentnummer
ISO 18562-1:2017
Titel
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process
Ausgabedatum
2017 03 13
Art
Standard
Dokumentnummer
ISO 23328-1:2003
Titel
Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance
Ausgabedatum
2003 08 20
Art
Standard
Dokumentnummer
ISO 23328-2:2002
Titel
Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects
Ausgabedatum
2002 10 22
Art
Standard
Dokumentnummer
ISO 3744:2010
Titel
Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Engineering methods for an essentially free field over a reflecting plane
Ausgabedatum
2010 09 22
Art
Standard
Dokumentnummer
ISO 4135:2001
Titel
Anaesthetic and respiratory equipment — Vocabulary
Ausgabedatum
2001 08 02
Art
Standard
Dokumentnummer
ISO 4871:1996
Titel
Acoustics — Declaration and verification of noise emission values of machinery and equipment
Ausgabedatum
1996 12 19
Art
Standard
Dokumentnummer
ISO 5356-1:2015
Titel
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
Ausgabedatum
2015 03 13
Art
Standard
Dokumentnummer
ISO 5367:2014
Titel
Anaesthetic and respiratory equipment — Breathing sets and connectors
Ausgabedatum
2014 10 15
Art
Standard
Dokumentnummer
ISO 7396-1:2016
Titel
Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum
Ausgabedatum
2016 02 15
Art
Standard
Dokumentnummer
ISO 80369-1:2010
Titel
Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements
Ausgabedatum
2010 12 08
Art
Standard
Dokumentnummer
ISO 80369-7:2016
Titel
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications (Corrected version 2016-12)
Ausgabedatum
2016 10 14
Art
Standard
Dokumentnummer
ISO 80601-2-12:2020
Titel
Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
Ausgabedatum
2020 02 25
Art
Standard
Dokumentnummer
ISO 80601-2-72:2015
Titel
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
Ausgabedatum
2015 09 01
Art
Standard
Dokumentnummer
ISO 80601-2-74:2017
Titel
Medical electrical equipment — Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment
Ausgabedatum
2017 05 18
Art
Standard
Dokumentnummer
ISO 8836:2014
Titel
Suction catheters for use in the respiratory tract
Ausgabedatum
2014 10 15
Art
Standard
Dokumentnummer
ISO 9000:2015
Titel
Quality management systems — Fundamentals and vocabulary
Ausgabedatum
2015 09 22
Art
Standard
Dokumentnummer
ISO 9360-1:2000
Titel
Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml
Ausgabedatum
2000 03 16
Art
Standard
Dokumentnummer
ISO 9360-2:2001
Titel
Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml
Ausgabedatum
2001 05 10
Art
Standard

Recently Viewed

ÖNORM EN ISO 11737-1

Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO 11737-1:2018 + Amd 1:2021) (consolidated version)

ISO 8877:1987/Amd 1:1991

Information processing systems — Interface connector and contact assignments for ISDN basic access interface located at reference points S and T — Amendment 1

ISO/FDIS 19011

Guidelines for auditing management systems
€200.34
excl. USt.
€220.37
incl. 10% USt.
Standard
ÖNORM EN ISO 80601-2-79 - Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment (ISO 80601-2-79:2018)

Customize and purchase single-user license

€200.34
excl. USt.
€220.37
incl. 10% USt.

Subscribe to standards

Your shopping cart is empty

Regarding the newly released ISO 9001, we recommend:

Standard
ÖNORM EN ISO 9001 - Quality management systems - Requirements (ISO 9001:2026)
View details
Seminar [Live-Online]
€749.00
excl. USt.
€898.80
incl. 20% USt.
View details
Seminar [Hybrid]
€675.00
excl. USt.
€810.00
incl. 20% USt.
View details
€49.00
excl. USt.
€58.80
incl. 20% USt.
View details
€2,419.00
excl. USt.
€2,902.80
incl. 20% USt.
View details