Please select and order
€98.22
excl. VAT
Add to cart
Norm

ÖNORM EN ISO 14526-2

Issue date: 2000 03 01

Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and determination of properties (ISO 14526-2:1999)

This part of ISO 14526 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of phenolic powder moulding co...
Valid
Publisher:
Austrian Standards International
Format:
Digital | 15 Pages
Language:
German | English | Download GER/ENG
Optionally co-design standards:
This part of ISO 14526 specifies the methods of preparation of test specimens and the test methods to be used in determining the properties of phenolic powder moulding compounds (PF-PMCs). Requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing are given here. Procedures and conditions for the preparation of test specimens and procedures for measuring properties of the materials from which these specimens are made are given. Properties and test methods which are suitable and necessary to characterize PMCs are listed. The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to, PMCs are also included in this part of ISO 14526, as are the designatory properties found in ISO 14526-1. In order to obtain reproducible and comparable test results, it is necessary to use the methods of preparation and conditioning, the specimen dimensions and the test procedures specified herein. Values determined will not necessarily be identical to those obtained using specimens of different dimensions or prepared using different procedures.
ÖNORM EN ISO 14526-2
2000 03 01
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 2: Preparation of test specimens and ...
Norm
Norm
ISO 179-1:2000
Issue date : 2000 12 07
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Draft
ISO/DIS 179-1
Issue date : 2008 10 23
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ÖNORM EN ISO 1183-3
Issue date : 2000 02 01
Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999)
Norm
ÖNORM EN ISO 120
Issue date : 1998 10 01
Plastics - Phenol-formaldehyde mouldings - Determination of free ammonia and ammonium compounds - Colorimetric comparison method (ISO 120:1977)
Norm
ÖNORM EN ISO 14526-1
Issue date : 2000 03 01
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 1: Designation system and basis for specifications (ISO 14526-1:1999)
Norm
ÖNORM EN ISO 14526-3
Issue date : 2000 03 01
Plastics - Phenolic powder moulding compounds (PF-PMCs) - Part 3: Requirements for selected moulding compounds (ISO 14526-3:1999)
Norm
ÖNORM EN ISO 178
Issue date : 2005 05 01
Plastics - Determination of flexural properties (ISO 178:2001 + Amd 1:2004) (consolidated version)
Norm
ÖNORM EN ISO 178
Issue date : 2008 09 01
Plastics - Determination of flexural properties (ISO/DIS 178:2008)
Norm
ÖNORM EN ISO 2039-1
Issue date : 2003 05 01
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
Norm
ÖNORM EN ISO 2818
Issue date : 1997 03 01
Plastics - Preparation of test specimens by machining (ISO 2818:1994)
Norm
ÖNORM EN ISO 291
Issue date : 2008 07 01
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008)
Norm
ÖNORM EN ISO 295
Issue date : 2004 05 01
Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004)
Norm
ÖNORM EN ISO 3167
Issue date : 2003 12 01
Plastics - Multipurpose test specimens (ISO 3167:2002)
Norm
ÖNORM EN ISO 3671
Issue date : 1999 01 01
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:1976)
Norm
ÖNORM EN ISO 4589-2
Issue date : 2006 09 01
Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996 + Amd. 1:2005) (consolidated version)
Norm
ÖNORM EN ISO 4614
Issue date : 1999 11 01
Plastics - Melamine-formaldehyde mouldings - Determination of extractable formaldehyde (ISO 4614:1977)
Norm
ÖNORM EN ISO 527-1
Issue date : 1996 05 01
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:1993 including Corr 1: 1994)
Norm
ÖNORM EN ISO 527-2
Issue date : 1996 07 01
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:1993 including Corr 1:1994)
Norm
ÖNORM EN ISO 60
Issue date : 1999 12 01
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:1977)
Norm
ÖNORM EN ISO 62
Issue date : 2008 05 01
Plastics - Determination of water absorption (ISO 62:2008)
Norm
ÖNORM EN ISO 6603-2
Issue date : 2002 04 01
Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test (ISO 6603-2:2000)
Norm
ÖNORM EN ISO 75-2
Issue date : 2006 09 01
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2004) (consolidated version)
Norm
ÖNORM EN ISO 7808
Issue date : 1999 01 01
Plastics - Thermosetting moulding materials - Determination of transfer flow (ISO 7808:1992)
Norm
ÖNORM EN ISO 8256
Issue date : 2005 06 01
Plastics - Determination of tensile-impact strength (ISO 8256:2004)
Norm
ÖNORM EN ISO 899-1
Issue date : 2003 10 01
Plastics - Determination of creep behaviour - Part 1: Tensile creep (ISO 899-1:2003)
Norm
ISO 60:1977
Issue date : 1977 08 01
Plastics — Determination of apparent density of material that can be poured from a specified funnel
Norm
ISO 62:1999
Issue date : 1999 02 04
Plastics — Determination of water absorption
Norm
ISO 75-2:1993
Issue date : 1993 08 26
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 120:1977
Issue date : 1977 10 01
Plastics — Phenol-formaldehyde mouldings — Determination of free ammonia and ammonium compounds — Colorimetric comparison method
Norm
ISO 171:1980
Issue date : 1980 05 01
Plastics — Determination of bulk factor of moulding materials
Norm
ISO 178:1993
Issue date : 1993 05 06
Plastics — Determination of flexural properties
Norm
ISO 179-1:2010
Issue date : 2010 06 04
Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
Norm
ISO 291:1997
Issue date : 1997 07 24
Plastics — Standard atmospheres for conditioning and testing
Norm
ISO 295:2004
Issue date : 2004 01 14
Plastics — Compression moulding of test specimens of thermosetting materials
Norm
ISO 472:1999
Issue date : 1999 11 25
Plastics — Vocabulary
Norm
ISO 527-1:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:1993
Issue date : 1993 06 10
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 800:1992
Issue date : 1992 01 30
Plastics — Phenolic moulding materials — Specification
Norm
ISO 899-1:1993
Issue date : 1993 12 23
Plastics — Determination of creep behaviour — Part 1: Tensile creep
Norm
ISO 1183:1987
Issue date : 1987 07 09
Plastics — Methods for determining the density and relative density of non-cellular plastics
Norm
ISO 2039-1:1993
Issue date : 1993 01 28
Plastics — Determination of hardness — Part 1: Ball indentation method
Norm
ISO 2577:1984
Issue date : 1984 12 01
Plastics — Thermosetting moulding materials — Determination of shrinkage
Norm
ISO 2818:1994
Issue date : 1994 08 18
Plastics — Preparation of test specimens by machining
Norm
ISO 3167:1993
Issue date : 1993 06 10
Plastics — Multipurpose test specimens
Norm
ISO 3671:1976
Issue date : 1976 09 01
Plastics — Aminoplastic moulding materials — Determination of volatile matter
Norm
ISO 4589-2:1996
Issue date : 1996 07 18
Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test
Norm
ISO 4614:1977
Issue date : 1977 07 01
Plastics — Melamine-formaldehyde mouldings — Determination of extractable formaldehyde
Norm
ISO 6603-2:1989
Issue date : 1989 12 14
Plastics — Determination of multiaxial impact behaviour of rigid plastics — Part 2: Instrumented puncture test
Norm
ISO 7808:1992
Issue date : 1992 11 24
Plastics — Thermosetting moulding materials — Determination of transfer flow
Norm
ISO 8256:1990
Issue date : 1990 12 20
Plastics — Determination of tensile-impact strength
Norm
ISO 10350-1:1998
Issue date : 1998 11 19
Plastics — Acquisition and presentation of comparable single-point data — Part 1: Moulding materials
Norm
ISO 10724-1:1998
Issue date : 1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 1: General principles and moulding of multipurpose test specimens
Norm
ISO 10724-2:1998
Issue date : 1998 11 19
Plastics — Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) — Part 2: Small plates
Norm
ISO 11359-2:1999
Issue date : 1999 10 07
Plastics — Thermomechanical analysis (TMA) — Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
Norm
ISO 14526-1:1999
Issue date : 1999 11 18
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 1: Designation system and basis for specifications
Norm
ISO 14526-3:1999
Issue date : 1999 11 18
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 3: Requirements for selected moulding compounds
Norm
ISO 14526-2:1999
Issue date : 1999 11 18
Plastics — Phenolic powder moulding compounds (PF-PMCs) — Part 2: Preparation of test specimens and determination of properties