Please select and order
€143.05
excl. VAT
Add to cart
Norm

ÖNORM EN 620

Issue date: 2002 07 01

Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials

1.1 This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and mainte...
Withdrawn: 2011 07 01
1.1 This European standard deals with the technical requirements to minimise the risks due to the hazards listed in clause 4, which can arise during operation and maintenance of fixed belt conveyors and systems as defined in 3.1 to 3.2.4 and designed for continuously conveying loose bulk materials from the loading point(s) to the unloading point(s). Requirements for electromagnetic compatibility are also covered. 1.2 This standard applies to use in ambient air temperatures of -15 C to + 40 C. 1.3 This standard does not cover : a) use in open cast lignite mining or use underground, such as in mines or tunnels ; b) use in public areas or for man-riding ; c) floating, dredging and ship mounted equipment ; d) conveyors requiring a high level of cleanliness for hygiene reasons, e.g. in direct contact with foodstuffs or pharmaceuticals ; e) conveyors using a moving belt with other than a continuous rubber or polymeric surface for the conveying medium ; f) transportation of the conveyor ; g) the design of the supporting structure which is not part of a conveyor (see 3.2) ; h) the effects of wind ; i) hazards resulting from handling specific hazardous materials, (e.g. explosives, radiating material) ; j) hazards resulting from contact with or inhalation of harmful fluids, gases, mists, fumes or dust ; k) biological and micro-biological (viral or bacterial) hazards ; l) hazards due to heat radiation from the materials handled ; m) hazards caused by operation in electromagnetic fields outside the range of EN 61000-6-2: 1999; n) hazards caused by operation subject to special regulations (e.g. explosive atmospheres) ; o) hazards caused by noise ; p) hazards caused by the use of ionising radiation sources ; q) hazards caused by hydraulic equipment. The safety requirements of this standard apply to equipment and systems placed on the market after the date of publication of this standard. NOTE Directive (...abbreviated)
ÖNORM EN 620
2022 03 01
Continuous handling equipment and systems - Safety requirements for fixed belt conveyors for bulk ma...
Norm
ÖNORM EN 620
2011 07 01
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for...
Norm
ÖNORM EN 620
2002 07 01
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for...
Norm
ÖNORM M 9705
1988 09 01
Continuous mechanical handling equipment; special safety rules
Norm
ÖNORM M 9709
1987 12 01
Continuous mechanical handling equipment; belt conveyors; examples for the protection of nip points ...
Norm
ÖNORM M 9706
1985 06 01
Continuous mechanical handling equipment; belt conveyors; examples for the protection of nip points ...
Norm
ÖNORM M 9706
1983 11 01
Continuous mechanical handling equipment; belt conveyors; examples for the protection of nip points ...
Norm
ÖNORM M 9705
1983 04 01
Continuous mechanical handling equipment; special safety rules
Norm
ÖNORM M 9704
1975 02 01
Continuous mechanical handling equipment for unit loads; overhead monorail chain conveyors; safety c...
Norm
ÖNORM M 9703
1975 02 01
Continuous mechanical handling equipment for loose bulk materials; vibrating feeders and conveyors, ...
Norm
ÖNORM M 9702
1974 08 01
Continuous mechanical handling equipment for loose bulk materials; belt feeders and conveyers safety...
Norm
Expand
Norm
ÖNORM EN ISO 13857
Issue date : 2008 08 01
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008)
Norm
ÖNORM EN 349
Issue date : 2008 09 01
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body
Norm
ÖNORM EN 1037
Issue date : 2008 11 01
Safety of machinery - Prevention of unexpected start-up
Norm
ÖNORM EN 842
Issue date : 2009 02 01
Safety of machinery - Visual danger signals - General requirements, design and testing
Norm
ÖNORM EN 574
Issue date : 2009 06 15
Safety of machinery - Two-hand control devices - Functional aspects - Principles for design
Norm
ÖNORM EN 953
Issue date : 2009 06 01
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards
Norm
ÖNORM EN 741
Issue date : 2011 06 15
Continuous handling equipment and systems - Safety requirements for systems and their components for pneumatic handling of bulk materials
Norm
ÖNORM EN 12150-1
Issue date : 2000 12 01
Glass in building - Thermally toughened soda lime silicate safety glass - Part 1: Definition and description
Norm
ÖNORM EN 1760-2
Issue date : 2009 05 15
Safety of machinery - Pressure sensitive protective devices - Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars
Norm
ÖNORM EN ISO 14122-1
Issue date : 2010 11 15
Safety of machinery - Permanent means of access to machinery - Part 1: Choice of fixed means of access between two levels (ISO 14122-1:2001 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN ISO 14122-2
Issue date : 2010 11 15
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2001 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN ISO 14122-3
Issue date : 2010 11 15
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2001 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN 617
Issue date : 2011 06 15
Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
Norm
ÖNORM EN 1005-1
Issue date : 2009 03 01
Safety of machinery - Human physical performance - Part 1: Terms and definitions (consolidated version)
Norm
ÖNORM EN 1005-3
Issue date : 2009 01 01
Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
Norm
ÖNORM EN 618
Issue date : 2009 03 15
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
Norm
ÖNORM EN 619
Issue date : 2011 02 15
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
Norm
ÖNORM EN 1005-2
Issue date : 2009 01 01
Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
Norm
ÖNORM EN ISO 14122-4
Issue date : 2011 01 01
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2004 + Amd 1:2010) (consolidated version)
Norm
ÖNORM EN 614-1
Issue date : 2009 05 01
Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles
Norm
ÖNORM EN 1127-1
Issue date : 2011 09 01
Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology
Norm
ISO 2148:1974
Issue date : 1974 10 01
Continuous handling equipment — Nomenclature
Norm
ISO 6184-1:1985
Issue date : 1985 11 21
Explosion protection systems — Part 1: Determination of explosion indices of combustible dusts in air
Norm
ÖNORM EN 620
Issue date : 2011 07 01
Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials