Please select and order
€229.44
excl. VAT
Add to cart
Norm

ÖNORM EN 13785

Issue date: 2007 05 01

Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures (consolidated version)

This document defines the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators having a capacity of less t...
Withdrawn: 2009 05 01
Publisher:
Austrian Standards International
Format:
Digital | 135 Pages
Language:
German | English
Currently valid:
This document defines the constructional and operational characteristics, the safety requirements, test methods and the marking of regulators having a capacity of less than or equal to 100 kg/h, other than the regulators covered by EN 12864, for butane, propane or their mixtures, in the gaseous phase. Regulators for caravans up to 1,5 kg/h are covered by EN 12864. NOTE 1 bar = 105 Pa This document also applies to the safety devices which are included within regulators covered by this document. The characteristics of these devices are given in annexes A and B. The requirements apply generally to regulators used in locations where the temperature likely to be reached during use is between -20 °C and +50 °C. When the regulators are used at temperatures below -20 °C it is essential that they comply with special requirements which are defined in annex C. This document does not include the installation rules for regulators. Reference should be made to national regulations in force in the member countries. This document only covers type testing. WARNING NOTICE: The figures in annexes G and H show the types of connections used according to the country of use of the regulators. The top part of these figures (above the horizontal line) applies to the regulator and is normative. The bottom part of these figures (below the horizontal line) applies to the part to be connected to the regulator. This is given as a guide for the tests and is not normative.
ÖNORM EN 16129
2013 09 01
Pressure regulators, automatic change-over devices, having a maximum regulated pressure of 4 bar, wi...
Norm
ÖNORM EN 13785
2010 03 15
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure...
Norm
ÖNORM EN 13785
2009 05 01
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure...
Norm
ÖNORM EN 13785
2007 05 01
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure...
Norm
ÖNORM EN 13785
2005 07 01
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure...
Norm
Expand
Norm
ISO 301:2006
Issue date : 2006 09 01
Zinc alloy ingots intended for castings
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 9227:2006
Issue date : 2006 07 06
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ÖNORM EN 12164
Issue date : 1998 04 01
Copper and copper alloys - Rod for free machining purposes
Norm
ÖNORM EN 12165
Issue date : 1998 04 01
Copper and copper alloys - Wrought and unwrought forging stock
Norm
ÖNORM EN 437
Issue date : 2003 09 01
Test gases - Test pressures - Appliance categories
Norm
ÖNORM EN 549
Issue date : 1995 02 01
Rubber materials for seals and diaphragms for gas appliances and gas equipment
Norm
ÖNORM EN ISO 178
Issue date : 2005 05 01
Plastics - Determination of flexural properties (ISO 178:2001 + Amd 1:2004) (consolidated version)
Norm
ÖNORM EN ISO 178
Issue date : 2008 09 01
Plastics - Determination of flexural properties (ISO/DIS 178:2008)
Norm
ÖNORM EN ISO 180
Issue date : 2007 06 01
Plastics - Determination of Izod impact strength (ISO 180:2000 + Amd . 1:2006) (consolidated version)
Norm
ÖNORM EN ISO 228-1
Issue date : 2003 06 01
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
Norm
ÖNORM EN ISO 3166-1
Issue date : 2007 03 01
Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2006)
Norm
ÖNORM EN ISO 4892-3
Issue date : 2006 05 01
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2006)
Norm
ÖNORM EN ISO 8434-1
Issue date : 2009 03 01
Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors (ISO 8434-1:2007)
Norm
ISO 7-1:1994
Issue date : 1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 301:2006
Issue date : 2006 09 01
Zinc alloy ingots intended for castings
Norm
ISO 565:1990
Issue date : 1990 07 12
Test sieves — Metal wire cloth, perforated metal plate and electroformed sheet — Nominal sizes of openings
Norm
ISO 7005-2:1988
Issue date : 1988 12 08
Metallic flanges — Part 2: Cast iron flanges
Norm
ISO 9227:2017
Issue date : 2017 03 17
Corrosion tests in artificial atmospheres — Salt spray tests
Norm
ÖNORM EN 13785
Issue date : 2009 05 01
Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures