Jetzt auswählen und bestellen
341,60 €
exkl. USt.
Konfigurieren
Norm

ÖVE/ÖNORM EN 60076-1

Ausgabedatum: 2012 04 01

Power Transformers - Part 1: General (IEC 60076-1:2011) (english version)

This part of IEC 60076 applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and spe...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 80 Seiten
Sprache:
Englisch
This part of IEC 60076 applies to three-phase and single-phase power transformers (including auto-transformers) with the exception of certain categories of small and special transformers such as: – single-phase transformers with rated power less than 1 kVA and three-phase transformers less than 5 kVA; – transformers, which have no windings with rated voltage higher than 1 000 V; – instrument transformers; – traction transformers mounted on rolling stock; – starting transformers; – testing transformers; – welding transformers; – explosion-proof and mining transformers; – transformers for deep water (submerged) applications. When IEC standards do not exist for such categories of transformers (in particular transformer having no winding exceeding 1000 V for industrial applications), this part of IEC 60076 may still be applicable either as a whole or in part. This standard does not address the requirements that would make a transformer suitable for mounting in a position accessible to the general public. For those categories of power transformers and reactors which have their own IEC standards, this part is applicable only to the extent in which it is specifically called up by cross-reference in the other standard. Such standards exist for: – reactors in general (IEC 60076-6); – dry-type transformers (IEC 60076-11); – self-protected transformers (IEC 60076-13); – gas-filled power transformers (IEC 60076-15); – transformers for wind turbine applications (IEC 60076-16); – traction transformers and traction reactors (IEC 60310); – converter transformers for industrial applications (IEC 61378-1); – converter transformers for HVDC applications (IEC 61378-2). At several places in this part it is specified or recommended that an 'agreement' should be reached concerning alternative or additional technical solutions or procedures. Such agreement is made between the manufacturer and the purchaser. The matters should preferably be raised at an early stage and the agreements included in the contract specification.
ÖVE/ÖNORM EN 60076-1
2012 04 01
Power Transformers - Part 1: General (IEC 60076-1:2011) (english version)
Norm
ÖVE M 20-1/1981
1981 12 01
Transformatoren und Drosselspulen - Teil 1: Allgemeines - einschließlich des Nachtrages ÖVE-M 20, Te...
Technische Regel
ÖVE M 20-1/1981
1981 12 01
Transformatoren und Drosselspulen - Teil 1: Allgemeines - einschließlich des Nachtrages ÖVE-M 20, Te...
Technische Regel
ÖVE M 20-1a/1984
1984
Nachtrag a zu den Bestimmungen über Transformatoren und Drosselspulen - Teil 1: Allgemeines, ÖVE-M 2...
Technische Regel
ÖVE M 20-1a/1984
1984
Nachtrag a zu den Bestimmungen über Transformatoren und Drosselspulen - Teil 1: Allgemeines, ÖVE-M 2...
Technische Regel
ÖVE/ÖNORM EN 60076-1/A12
2003 03 01
Leistungstransformatoren - Teil 1: Allgemeines (Änderung)
Norm
ÖVE/ÖNORM EN 60076-1/A1
2001 09 01
Leistungstransformatoren - Teil 1: Allgemeines (IEC 60076-1:1993/A1:1999) (Änderung)
Norm
ÖVE EN 60076-1/A11
1998 03
Leistungstransformatoren - Teil 1: Allgemeines
Technische Regel
ÖVE EN 60076-1
1997 11
Leistungstransformatoren - Teil 1: Allgemeines
Technische Regel
Historie aufklappen
Norm
ÖNORM EN ISO 9001
Ausgabedatum : 2009 08 15
Qualitätsmanagementsysteme - Anforderungen (ISO 9001:2008 + Cor.1:2009) (konsolidierte Fassung)
Norm
ISO 9001:2008
Ausgabedatum : 2008 11 13
Quality management systems — Requirements (Corrected version 2009-07)