Jetzt auswählen und bestellen
286,66 €
exkl. USt.
Konfigurieren
Norm
ÖNORM ISO 17885
Ausgabedatum: 2021 08 15
Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
This standard specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal ...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 63 Seiten
Sprache:
Englisch
Standards mitgestalten:
This standard specifies the requirements and test methods for mechanical fittings intended to join plastic pressure piping systems including transition fittings to metal pipes for the following: - supply of water for human consumption, including raw water prior to treatment and for the supply of water for general purpose, as well as underground drainage and sewerage under pressure, - supply of water for irrigation, - industrial applications. This standard is applicable only to mechanical fittings with operating-temperatures and pressure limits as indicated in the relevant systems standards. (see Annex A of ISO 17885).
The quality assurance of the mechanical connectors is regulated in a national annex.
ÖNORM ISO 17885
2021 08 15
Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications
Norm
↖
ÖNORM ISO 17885
2018 02 15
Plastics piping systems - Mechanical fittings for pressure piping systems - Specifications (ISO 1788...
Norm
Norm
ISO 7-1:1994
Ausgabedatum :
1994 05 12
Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation
Norm
ISO 75-2:2013
Ausgabedatum :
2013 04 09
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Norm
ISO 306:2013
Ausgabedatum :
2013 11 08
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST)
Norm
ISO 580:2005
Ausgabedatum :
2005 03 07
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating
Norm
ISO 1133-1:2011
Ausgabedatum :
2011 11 28
Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method
Norm
ISO 1167-1:2006
Ausgabedatum :
2006 01 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method
Norm
ISO 1167-2:2006
Ausgabedatum :
2006 01 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces
Norm
ISO 1167-4:2007
Ausgabedatum :
2007 10 30
Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies
Norm
ISO 2507-1:1995
Ausgabedatum :
1995 02 02
Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method
Norm
ISO 2507-2:1995
Ausgabedatum :
1995 02 02
Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
Norm
ISO 3458:2015
Ausgabedatum :
2015 03 26
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure
Norm
ISO 3459:2015
Ausgabedatum :
2015 02 26
Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
Norm
ISO 3501:2015
Ausgabedatum :
2015 03 02
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
Norm
ISO 3503:2015
Ausgabedatum :
2015 02 27
Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
Norm
ISO 6509-1:2014
Ausgabedatum :
2014 05 15
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
Norm
ISO 6993-1:2006
Ausgabedatum :
2006 06 14
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
Norm
ISO 6993-2:2006
Ausgabedatum :
2006 06 14
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
Norm
ISO 6993-3:2006
Ausgabedatum :
2006 06 14
Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
Norm
ISO 9080:2012
Ausgabedatum :
2012 10 11
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
Norm
ISO 10147:2011
Ausgabedatum :
2011 08 30
Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
Norm
ISO 12162:2009
Ausgabedatum :
2009 10 27
Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient
Norm
ISO 13783:1997
Ausgabedatum :
1997 08 28
Plastics piping systems — Unplasticized poly(vinyl chloride) (PVC-U) end-load-bearing double-socket joints — Test method for leaktightness and strength while subjected to bending and internal pressure
Norm
ISO 13844:2015
Ausgabedatum :
2015 02 26
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation
Norm
ISO 13845:2015
Ausgabedatum :
2015 02 10
Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection
Norm
ISO 13951:2015
Ausgabedatum :
2015 03 02
Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading
Norm
ISO 16010:2019
Ausgabedatum :
2019 08 28
Elastomeric seals — Material requirements for seals used in pipes and fittings carrying gaseous fuels and hydrocarbon fluids
Norm
ISO 16486-1:2020
Ausgabedatum :
2020 08 18
Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 1: General
Norm
ISO 17778:2015
Ausgabedatum :
2015 03 16
Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships
Norm
ISO 19899:2010
Ausgabedatum :
2010 08 30
Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)
Norm
ISO 23711:2003
Ausgabedatum :
2003 11 26
Elastomeric seals — Requirements for materials for pipe joint seals used in water and drainage applications — Thermoplastic elastomers
Norm
ÖNORM B 5014-1
Ausgabedatum :
2016 08 15
Sensorische und chemische Anforderungen und Prüfung von Werkstoffen im Trinkwasserbereich - Teil 1: Organische Werkstoffe
Norm
ÖNORM B 5014-3
Ausgabedatum :
2017 05 01
Sensorische und chemische Anforderungen und Prüfung von Werkstoffen im Trinkwasserbereich - Teil 3: Metallische Werkstoffe
Norm
ÖNORM B 5174-1
Ausgabedatum :
2011 01 01
Rohre aus Polypropylen für Sonderanwendungen - Abmessungen, Anforderungen, Prüfungen - Teil 1: Nicht modifizierte PP-Werkstoffe PP-H, PP-B, PP-R, PP-RCT
Norm
ÖNORM EN 1555-2
Ausgabedatum :
2022 01 01
Kunststoff-Rohrleitungssysteme für die Gasversorgung - Polyethylen (PE) - Teil 2: Rohre
Norm
ÖNORM EN 12201-2
Ausgabedatum :
2023 07 15
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 2: Rohre
Norm
ÖNORM EN ISO 1452-2
Ausgabedatum :
2020 03 01
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für erdverlegte und nicht erdverlegte Entwässerungs- und Abwasserdruckleitungen - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Rohre
Norm
ÖNORM EN ISO 10931
Ausgabedatum :
2015 12 15
Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Polyvinyliden Fluoride (PVDF) - Anforderungen an Rohrleitungsteile und das Rohrleitungssystem (ISO 10931:2005 + Amd 1:2015) (konsolidierte Fassung)
Norm
ÖNORM EN ISO 15493
Ausgabedatum :
2017 07 15
Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Acrylnitril-Butadien-Styrol (ABS), weichmacherfreies Polyvinylchlorid (PVC-U) und chloriertes Polyvinylchlorid (PVC-C) - Anforderungen an Rohrleitungsteile und das Rohrleitungssystem - Metrische Reihen (ISO 15493:2003 + Cor.1:2004 + Amd.1:2016) (konsolidierte Fassung)
Norm
ÖNORM EN ISO 15494
Ausgabedatum :
2021 05 01
Kunststoff-Rohrleitungssysteme für industrielle Anwendungen - Polybuten (PB), Polyethylen (PE), Polyethylen erhöhter Temperaturbeständigkeit (PE-RT), vernetztes Polyethylen (PE-X), Polypropylen (PP) - Metrische Reihen für Anforderungen an Rohrleitungsteile und das Rohrleitungssystem (ISO 15494:2015 + Amd 1:2020) (konsolidierte Fassung)