Jetzt auswählen und bestellen
229,44 €
exkl. USt.
Konfigurieren
Norm

ÖNORM EN ISO 80601-2-13

Ausgabedatum: 2022 12 15

Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2022)

Clause 1 of IEC 60601-1:2005+AMD1:2012+AMD2:2020 applies, except as follows: Replacement: This document is applicable to the basic safety and essential performance of...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 115 Seiten
Sprache:
Englisch
Standards mitgestalten:
Clause 1 of IEC 60601-1:2005+AMD1:2012+AMD2:2020 applies, except as follows: Replacement: This document is applicable to the basic safety and essential performance of an anaesthetic workstation for administering inhalational anaesthesia whilst continuously attended by a professional operator. This document specifies particular requirements for a complete anaesthetic workstation and the following anaesthetic workstation components which, although considered as individual devices in their own right, may be utilized, in conjunction with other relevant anaesthetic workstation components, to form an anaesthetic workstation to a given specification: - anaesthetic gas delivery system; - anaesthetic breathing system; - anaesthetic gas scavenging system (AGSS); - anaesthetic vapour delivery system; - anaesthetic ventilator; - monitoring equipment; - alarm system; - protection device. An anaesthetic workstation supplied complete and its individual components are considered as ME equipment or ME systems with regard to the general standard. This document is also applicable to those accessories intended by their manufacturer to be connected to an anaesthetic workstation where the characteristics of those accessories can affect the basic safety and essential performance of the anaesthetic workstation. If a clause or subclause is specifically intended to be applicable to anaesthetic workstation components or its accessories only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to an anaesthetic workstation and its individual components including accessories, as relevant. Hazards inherent in the intended physiological function of an anaesthetic workstation and its individual components including accessories within the scope of this document are not covered by specific requirements in this document except in IEC 60601-1:2005+AMD1:2012+AMD2:2020, 7.2.13 and 8.4.1. This document is not applicable to any anaesthetic workstation intended for use with flammable anaesthetic agents, as determined by Annex BB.
ÖNORM EN ISO 80601-2-13
2022 12 15
Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential per...
Norm
ÖNORM EN ISO 80601-2-13
2020 05 15
Medizinische elektrische Geräte - Teil 2-13: Besondere Festlegungen für die Sicherheit einschließlic...
Norm
ÖNORM EN ISO 80601-2-13
2020 05 01
Medizinische elektrische Geräte - Teil 2-13: Besondere Festlegungen für die Sicherheit einschließlic...
Norm
ÖNORM EN ISO 80601-2-13
2013 03 15
Medizinische elektrische Geräte - Teil 2-13: Besondere Festlegungen für die Sicherheit einschließlic...
Norm
ÖNORM EN ISO 8835-3
2011 03 01
Systeme für die Inhalationsanästhesie - Teil 3: Weiterleitungs- und Aufnahmesysteme von aktiven Anäs...
Norm
ÖNORM EN ISO 8835-4
2009 09 15
Systeme für die Inhalationsanästhesie - Teil 4: Anästhesiemittelverdampfer (ISO 8835-4:2004)
Norm
ÖNORM EN ISO 8835-2
2009 09 01
Systeme für die Inhalationsanästhesie - Teil 2: Anästhesie-Atemsysteme (ISO 8835-2:2007)
Norm
ÖNORM EN ISO 8835-5
2009 07 15
Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-5:2004)
Norm
ÖNORM EN ISO 8835-2
2007 11 01
Systeme für die Inhalationsanästhesie - Teil 2: Anästhesie-Atemsysteme (ISO 8835-2:2007)
Norm
ÖVE/ÖNORM EN 60601-2-13
2007 07 01
Medizinische elektrische Geräte - Teil 2-13: Besondere Festlegungen für die Sicherheit von Anästhesi...
Norm
ÖNORM EN ISO 8835-5
2005 07 01
Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-5:2004)
Norm
ÖNORM EN ISO 8835-4
2005 05 01
Systeme für die Inhalationsanästhesie - Teil 4: Anästhesiemittelverdampfer (ISO 8835-4:2004) (konsol...
Norm
ÖNORM EN ISO 8835-5
2005 05 01
Systeme für die Inhalationsanästhesie - Teil 5: Anästhesie-Beatmungsgeräte (ISO 8835-5:2004) (konsol...
Norm
ÖNORM EN 740
2004 06 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen (EN 740:1998 + A1:2004)
Norm
ÖNORM EN 740
2004 06 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen (EN 740:1998 + A1:2004)
Norm
ÖNORM EN 740/AC1
1999 07 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen (Berichtigung)
Norm
ÖNORM EN 740/AC1
1999 07 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen (Berichtigung)
Norm
ÖNORM EN 740
1998 10 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen
Norm
ÖNORM EN 740
1998 10 01
Anästhesie-Arbeitsplätze und ihre Module - Besondere Festlegungen
Norm
Historie aufklappen
Norm
ISO 407:2021
Ausgabedatum : 2021 06 04
Small medical gas cylinders — Pin-index yoke-type valve connections
Norm
ISO 5145:2017
Ausgabedatum : 2017 11 28
Gas cylinders — Cylinder valve outlets for gases and gas mixtures — Selection and dimensioning
Norm
ISO 5356-1:2015
Ausgabedatum : 2015 03 13
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
Norm
ISO 5360:2016
Ausgabedatum : 2016 02 12
Anaesthetic vaporizers — Agent-specific filling systems
Norm
ISO 5367:2014
Ausgabedatum : 2014 10 15
Anaesthetic and respiratory equipment — Breathing sets and connectors
Norm
ISO 7396-2:2007
Ausgabedatum : 2007 04 16
Medical gas pipeline systems — Part 2: Anaesthetic gas scavenging disposal systems (Corrected version 2007-04)
Norm
ISO 9170-1:2017
Ausgabedatum : 2017 07 24
Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum
Norm
ISO 9170-2:2008
Ausgabedatum : 2008 06 16
Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems
Norm
ISO 10524-1:2018
Ausgabedatum : 2018 02 01
Pressure regulators for use with medical gases — Part 1: Pressure regulators and pressure regulators with flow-metering devices
Norm
ISO 10993-1:2018
Ausgabedatum : 2018 08 17
Biological evaluation of medical devices — Part 1: Evaluation and testing within a risk management process (Corrected version 2018-10)
Norm
ISO 18562-1:2017
Ausgabedatum : 2017 03 13
Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process
Norm
ISO 80369-7:2016
Ausgabedatum : 2016 10 14
Small-bore connectors for liquids and gases in healthcare applications — Part 7: Connectors for intravascular or hypodermic applications (Corrected version 2016-12)
Norm
ISO 80601-2-55:2018
Ausgabedatum : 2018 02 12
Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
Norm
ISO/IEC 80079-20-1:2017
Ausgabedatum : 2017 12 15
Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data