Jetzt auswählen und bestellen
160,20 €
exkl. USt.
Konfigurieren
Norm
ÖNORM EN ISO 18797-2
Ausgabedatum: 2022 03 15
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 2: Maintenance and field repair coatings for riser pipes (ISO 18797-2:2021)
This document specifies the selection criteria and minimum requirements for protective coating systems for maintenance and field repair of risers exposed to conditions in...
Weiterlesen
Gültig
Herausgeber:
Austrian Standards International
Format:
Digital | 76 Seiten
Sprache:
Englisch
Standards mitgestalten:
ICS
This document specifies the selection criteria and minimum requirements for protective coating systems for maintenance and field repair of risers exposed to conditions in the splash zone. It is applicable for maintenance requirements and field repairs of riser coatings.
This document does not apply to the selection of techniques and materials used to restore integrity of the risers to be coated, nor does it apply to the selection of additional mechanical protective materials that are not part of the coating systems described in this document.
New construction shop applied riser coatings are covered in ISO 18797-1. Compatible maintenance and repair coating systems specified in ISO 18797-1 are covered in this document.
ÖNORM EN ISO 18797-2
2022 03 15
Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coa...
Norm
↖
Norm
ISO 527-3:2018
Ausgabedatum :
2018 11 05
Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
Norm
ISO 868:2003
Ausgabedatum :
2003 04 14
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness)
Norm
ISO 1183-1:2019
Ausgabedatum :
2019 02 28
Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pycnometer method and titration method (Corrected version 2019-05)
Norm
ISO 1431-1:2012
Ausgabedatum :
2012 08 17
Rubber, vulcanized or thermoplastic — Resistance to ozone cracking — Part 1: Static and dynamic strain testing
Norm
ISO 1817:2015
Ausgabedatum :
2015 02 11
Rubber, vulcanized or thermoplastic — Determination of the effect of liquids
Norm
ISO 2781:2018
Ausgabedatum :
2018 06 25
Rubber, vulcanized or thermoplastic — Determination of density
Norm
ISO 2811-1:2016
Ausgabedatum :
2016 02 17
Paints and varnishes — Determination of density — Part 1: Pycnometer method
Norm
ISO 3233-1:2019
Ausgabedatum :
2019 11 15
Paints and varnishes — Determination of percentage volume of non-volatile matter — Part 1: Method using a coated test panel to determine non-volatile matter and to determine dry-film density by the Archimedes' principle
Norm
ISO 3801:1977
Ausgabedatum :
1977 09 01
Textiles — Woven fabrics — Determination of mass per unit length and mass per unit area
Norm
ISO 4591:1992
Ausgabedatum :
1992 12 03
Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness)
Norm
ISO 4593:1993
Ausgabedatum :
1993 11 18
Plastics — Film and sheeting — Determination of thickness by mechanical scanning
Norm
ISO 4628-2:2016
Ausgabedatum :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering
Norm
ISO 4628-3:2016
Ausgabedatum :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 3: Assessment of degree of rusting
Norm
ISO 4628-4:2016
Ausgabedatum :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 4: Assessment of degree of cracking
Norm
ISO 4628-5:2016
Ausgabedatum :
2016 01 12
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking
Norm
ISO 4628-6:2011
Ausgabedatum :
2011 08 30
Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 6: Assessment of degree of chalking by tape method
Norm
ISO 4892-2:2013
Ausgabedatum :
2013 02 28
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
Norm
ISO 6502-2:2018
Ausgabedatum :
2018 07 24
Rubber — Measurement of vulcanization characteristics using curemeters — Part 2: Oscillating disc curemeter
Norm
ISO 6964:2019
Ausgabedatum :
2019 02 27
Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method
Norm
ISO 8501-4:2020
Ausgabedatum :
2020 10 15
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with water jetting
Norm
ISO 8502-3:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method)
Norm
ISO 8502-4:2017
Ausgabedatum :
2017 01 10
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application
Norm
ISO 8502-6:2020
Ausgabedatum :
2020 04 30
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 6: Extraction of water soluble contaminants for analysis (Bresle method)
Norm
ISO 8502-9:2020
Ausgabedatum :
2020 08 07
Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 9: Field method for the conductometric determination of water-soluble salts
Norm
ISO 8503-2:2012
Ausgabedatum :
2012 02 22
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure
Norm
ISO 8503-5:2017
Ausgabedatum :
2017 03 02
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
Norm
ISO 11357-1:2016
Ausgabedatum :
2016 09 16
Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles
Norm
ISO 11357-2:2020
Ausgabedatum :
2020 03 02
Plastics — Differential scanning calorimetry (DSC) — Part 2: Determination of glass transition temperature and step height
Norm
ISO 11357-3:2018
Ausgabedatum :
2018 03 16
Plastics — Differential scanning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
Norm
ISO 12944-9:2018
Ausgabedatum :
2018 01 31
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures
Norm
ISO 16474-3:2021
Ausgabedatum :
2021 01 08
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps
Norm
ISO 18797-1:2016
Ausgabedatum :
2016 08 19
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM
Norm
ISO 19840:2012
Ausgabedatum :
2012 08 22
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
Norm
ISO 21809-3:2016
Ausgabedatum :
2016 02 15
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings
Norm
ISO 23529:2016
Ausgabedatum :
2016 10 27
Rubber — General procedures for preparing and conditioning test pieces for physical test methods
Norm
ISO 34-1:2015
Ausgabedatum :
2015 06 02
Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
Norm
ISO 37:2017
Ausgabedatum :
2017 11 10
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
Norm
ISO 48-2:2018
Ausgabedatum :
2018 08 20
Rubber, vulcanized or thermoplastic — Determination of hardness — Part 2: Hardness between 10 IRHD and 100 IRHD
Norm
ISO 527-1:2019
Ausgabedatum :
2019 07 26
Plastics — Determination of tensile properties — Part 1: General principles
Norm
ISO 527-2:2012
Ausgabedatum :
2012 02 22
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
Norm
ISO 18797-2:2021
Ausgabedatum :
2021 09 13
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 2: Maintenance and field repair coatings for riser pipes