Please select and order
€160.20
excl. VAT
CONFIGURE NOW
Norm

ÖNORM EN 1999-1-4

Issue date: 2013 01 15

Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting (consolidated version)

EN 1999-1-4 gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sh...
Read more
Valid
EN 1999-1-4 gives design requirements for cold-formed trapezoidal aluminium sheeting. It applies to cold-formed aluminium products made from hot rolled or cold rolled sheet or strip that have been cold-formed by such processes as cold-rolled forming or press-breaking. The execution of aluminium structures made of cold-formed sheeting is covered in EN 1090-3. Methods are also given for stressed-skin design using aluminium sheeting as a structural diaphragm. This part does not apply to cold-formed aluminium profiles like C-, Z- etc profiles nor cold-formed and welded circular or rectangular hollow sections. EN 1999-1-4 gives methods for design by calculation and for design assisted by testing. The methods for the design by calculation apply only within stated ranges of material properties and geometrical properties for which sufficient experience and test evidence is available. These limitations do not apply to design by testing. EN 1999-1-4 does not cover load arrangement for loads during execution and maintenance.
ÖNORM EN 1999-1-4
2013 01 15
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting (consolidate...
Norm
ÖNORM EN 1999-1-4
2010 08 15
Eurocode 9 - Design of aluminium structures - Part 1-4: Cold-formed structural sheeting (consolidate...
Norm
ÖNORM ENV 1999-1-1
2000 06 01
Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for b...
Vornorm
ÖNORM ENV 1999-1-1
1998 11 01
Eurocode 9: Design of aluminium structures - Part 1-1: General rules - General rules and rules for b...
Vornorm
ÖNORM ENV 1999-2
1998 11 01
Eurocode 9: Design of aluminium structures - Part 2: Structures susceptible to fatigue
Vornorm
ÖNORM ENV 1999-1-2
1998 11 01
Eurocode 9: Design of aluminium structures - Part 1-2: General rules - Structural fire design
Vornorm
Historie aufklappen
Norm
ÖNORM EN ISO 1479
Issue date : 2011 11 01
Hexagon head tapping screws (ISO 1479:2011)
Norm
ÖNORM EN ISO 1481
Issue date : 2011 11 01
Slotted pan head tapping screws (ISO 1481:2011)
Norm
ÖNORM EN 1396
Issue date : 2007 08 01
Aluminium and aluminium alloys - Coil coated sheet and strip for general applications - Specifications
Norm
ÖNORM EN ISO 12944-2
Issue date : 1998 11 01
Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 2: Classification of environments (ISO 12944-2:1998)
Norm
ÖNORM EN ISO 15481
Issue date : 1999 12 01
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999)
Norm
ÖNORM EN ISO 15480
Issue date : 2000 02 01
Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999)
Norm
ÖNORM EN 508-2
Issue date : 2008 11 01
Roofing products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 2: Aluminium
Norm
ÖNORM EN ISO 15973
Issue date : 2001 06 01
Closed end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15973:2000)
Norm
ÖNORM EN ISO 15974
Issue date : 2001 06 01
Closed end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15974:2000)
Norm
ÖNORM EN ISO 6892-1
Issue date : 2009 11 01
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2009)
Norm
ÖNORM EN 1990
Issue date : 2003 03 01
Eurocode - Basis of structural design
Norm
ÖNORM EN ISO 15977
Issue date : 2011 02 01
Open end blind rivets with break pull mandrel and protruding head - AIA/St (ISO 15977:2002)
Norm
ÖNORM EN ISO 15982
Issue date : 2003 03 01
Open end blind rivets with break pull mandrel and countersunk head - AIA/AIA (ISO 15982:2002)
Norm
ÖNORM EN ISO 15978
Issue date : 2003 03 01
Open end blind rivets with break pull mandrel and countersunk head - AIA/St (ISO 15978:2002)
Norm
ÖNORM EN ISO 15981
Issue date : 2003 03 01
Open end blind rivets with break pull mandrel and protruding head - AIA/AIA (ISO 15981:2002)
Norm
ÖNORM EN 1995-1-1
Issue date : 2009 07 01
Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings (consolidated version)
Norm
ÖNORM EN 485-2
Issue date : 2009 01 01
Aluminium and aluminium alloys - Sheet, strip and plate - Part 2: Mechanical properties
Norm
ÖNORM EN 1999-1-1
Issue date : 2010 08 15
Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules (consolidated version)
Norm
ÖNORM EN 1090-3
Issue date : 2008 12 01
Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
Norm
ISO 7049:2011
Issue date : 2011 07 21
Cross-recessed pan head tapping screws